PSU Help setting up

[Yeskinggaming1]

So I got a new psu of 500w from my old 310w psu

But now im not sure how to install it, I know only how to install the p2 connector

But I got 2x4 pin connectors and im not sure where to install it, like which 4 pin goes in which slot 

My board is hp 8767, hp pavillion tg01

[Bill_To · Accepted solution]

Greetings @Yeskinggaming1 

One four pin PSU power connector, which should be a longer cable, provides CPU power.

The MB CPU power header is at the top left of the MB near the CPU.

The second four pin PSU power connector provides SATA power.  This PSU power cable should be shorter.

The second four pin MB SATA power header is located at the front of the MB near the memory slots and the chipset.

Both PSU power connectors should be keyed to connect to the MB in only one direction.

Regards