cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
SoupCanMafia
Level 1
3 1 0 3
Message 1 of 2
195
Flag Post

Solved!

PSU Upgrade for HP Pavilion TP01

HP Recommended
Pavilion TP01-1036
Microsoft Windows 10 (64-bit)

Not too long ago, I had gotten an MSI GeForce GTX 1650 for my Pavilion TP01-1036. While the 185W PSU would have meant it'd cut off a couple of times, my standing problem is that the default PSU that came with the desktop has no six-pin plug for the GPU I had bought. Are there PSUs out there that are able to plug into the Baker motherboard while still providing the six-pin plug for my GPU? And if such a thing exists, where may I get one so I can use the GPU?

1 ACCEPTED SOLUTION

Accepted Solutions
old_geekster
Level 16
Level 16
25,506 9,149 2,950 11,185
Message 2 of 2
Flag Post
HP Recommended

@SoupCanMafia , welcome to the Community.

 

The motherboard in your computer is HP proprietary. It has a 4-pin power connector instead of a standard 24-pin ATX power connector. You will have to buy any PSU upgrade from HP.  HP has two PSU's that should work with your motherboard: 400W (L69242-800) and 500W (L05757-800).  These PSU's have a 6+2 PCIe power connector.  I suggest checking with HP Customer Support to make certain that they will work before ordering either of them.  You can order them on HP PartSurfer by checking the box next to "Add to Cart".

 

Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.



I am not an HP Employee!!
Intelligence is God given. Wisdom is the sum of our mistakes!!

View solution in original post

Was this reply helpful? Yes No
1 REPLY 1
old_geekster
Level 16
Level 16
25,506 9,149 2,950 11,185
Message 2 of 2
Flag Post
HP Recommended

@SoupCanMafia , welcome to the Community.

 

The motherboard in your computer is HP proprietary. It has a 4-pin power connector instead of a standard 24-pin ATX power connector. You will have to buy any PSU upgrade from HP.  HP has two PSU's that should work with your motherboard: 400W (L69242-800) and 500W (L05757-800).  These PSU's have a 6+2 PCIe power connector.  I suggest checking with HP Customer Support to make certain that they will work before ordering either of them.  You can order them on HP PartSurfer by checking the box next to "Add to Cart".

 

Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.



I am not an HP Employee!!
Intelligence is God given. Wisdom is the sum of our mistakes!!
Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation