cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
Tungsten
New member
1 0 0 0
Message 1 of 2
359
Flag Post

Solved!

PSU upgrade for HP desktop M01-F0134

HP Recommended
M01-F0134
Microsoft Windows 10 (64-bit)

Hello, I want to upgrade to a graphic card that has a higher power requirement than the default 180W PSU that comes with the M01-F0134 computer. So my question is what PSU upgrade options are available for the HP desktop M01-F0134? If you can also provide the link that would be great too. Thanks!

1 ACCEPTED SOLUTION

Accepted Solutions
old_geekster
Level 16
Level 16
25,499 9,142 2,950 11,184
Message 2 of 2
Flag Post
HP Recommended

@Tungsten , welcome to the Community.

 

The motherboard in your computer is HP proprietary.  It has a 4-pin power connector instead of the standard 24-pin ATX power connector.  You will have to buy any upgrade PSU directly from HP.  The only PSU that I can verify will work is 310W (L64961-800).  Here is a Power Supply Cross-Reference Chart to show you where I got the information: https://h30434.www3.hp.com/t5/Desktop-Knowledge-Base/Power-Supply-Cross-Reference-for-specific-model...

 

Your exact model is not listed, but all of the M01 series have the same power connector.  Here is the PSU on HP PartSurfer: https://partsurfer.hp.com/Search.aspx?searchText=L64961-800

 

You can order it by selecting the box next to "Add to Cart".

 

Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.



I am not an HP Employee!!
Intelligence is God given. Wisdom is the sum of our mistakes!!

View solution in original post

Was this reply helpful? Yes No
1 REPLY 1
old_geekster
Level 16
Level 16
25,499 9,142 2,950 11,184
Message 2 of 2
Flag Post
HP Recommended

@Tungsten , welcome to the Community.

 

The motherboard in your computer is HP proprietary.  It has a 4-pin power connector instead of the standard 24-pin ATX power connector.  You will have to buy any upgrade PSU directly from HP.  The only PSU that I can verify will work is 310W (L64961-800).  Here is a Power Supply Cross-Reference Chart to show you where I got the information: https://h30434.www3.hp.com/t5/Desktop-Knowledge-Base/Power-Supply-Cross-Reference-for-specific-model...

 

Your exact model is not listed, but all of the M01 series have the same power connector.  Here is the PSU on HP PartSurfer: https://partsurfer.hp.com/Search.aspx?searchText=L64961-800

 

You can order it by selecting the box next to "Add to Cart".

 

Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.



I am not an HP Employee!!
Intelligence is God given. Wisdom is the sum of our mistakes!!
Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation