-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Hardware and Upgrade Questions
- ProOne 440 G4 CPU upgrade

Create an account on the HP Community to personalize your profile and ask a question
12-30-2023 01:11 PM
Hello! I have 4HS09EA, with i5-8500T. Is Intel 9th gen supported so I can upgrade with i9 35W CPU (i9-9900T), or the max upgrade is i7-8700T?
Solved! Go to Solution.
Accepted Solutions
12-30-2023 03:53 PM
You're very welcome.
I doubt the G4 supports 9th gen core processors.
The ProOne 440 G5 comes with those processors.
You can read all of the release notes for all of the BIOS updates below and none of them add support for newer processors.
- Provides security update with new ME FW
- Fixes "System Security Issue has been detected" when doing Windows System Restore with HP Sure Run activated on Windows 10 RS4 OS. - Adds Event logs in F10 BIOS menu.
- Adds new details in "System Information Tab" in F10 BIOS menu.
- Updates CCG5 FW to 6.3(Signed).
- Updates SIO FW to 7.9.34.
-Fixes issue where Bitlocker cannot be unlocked over network.
-Fixes issue where system updates firmware from EFI partition of system drive instead of USB drive when selecting "Update System and Supported Device Firmware Using Local Media" from BIOS setup (F10).
-Fixes issue where virtual touch keyboard still displays in HP logo screen after entering correct PIN code.
-Fixes issue where changes made in BIOS Setup (F10) after a failed PXE boot would not be saved.
-Fixes issue where system hangs in POST when plugging in the Apple USB-C HDMI/VGA Multiport Adapter.
-Fixes issue where BIOS updates triggered by Windows Update does not occur after inputting the incorrect Admin password then inputting correct password.
-Fixes issue where system still updates ME and Cypress PD Firmware when entering incorrect BIOS administrator password.
-Fixes issue where Absolute Persistence function would not work while HP Sure Run is activated.
-Fixes audio output distortion issue while plugging in a 3rd-party AC adapter.
-Fixes issue where ME firmware update process stops around 60 to 120 seconds when connecting HP Thunderbolt Dock during update process.
-Fixes issue where system still pop out Physical Presence Interface when disabling Intel SGX in BIOS setup (F10) with Physical Presence Interface setting disabled.
-Fixes issue where "RFID" option disappears in BIOS setup (F10) after disabling it.
-Fixes issue where system will resume from sleep via Collaboration Buttons when it is disabled in BIOS setup (F10). -Adds Russian Language Support in F10 setup interface.
-Adds a feature to hide BIOS administrator account in Power-On Authentication screen.
-Increases PXE IP time-to-live (TTL) value to improve compatibility with diverse end-user network environments.
-Adds Drivelock password feature support on Pyrite NVMe SSD.
-Improves Japanese touch keyboard layout.
-Updates the Intel silicon reference code for compatibility enhancement.
-Updates the CPU microcode for Intel processors to 0x9A.
-Enhancement to address security vulnerabilities CVE-2018-12201, CVE-2018- 12202, CVE-2018-12203, CVE-2018-12204, CVE-2018-12205.
-Enhancement to address security vulnerabilities CVE-2018-12188, CVE-2018-12189, CVE-2018-12190, CVE-2018-12191, CVE-2018-12192, CVE-2018-12199, CVE-2018-12198, CVE-2018-12200, CVE-2018-12187, CVE-2018-12196, CVE-2018-12185, CVE-2018-12208
-Fixed issue where user cannot exit MEBx (F6) by pressing Y or N key when setting language to Russian in F10 setup.
-Fixed issue where intermittently USB Type-C device shows yellow bang in device manager when resume from sleep.
-Fixed a timing issue bundle with Intel i210 add-on card which will cause "Wake on LAN/Wake on Link" fail.
-Fixed issue where system will hang with black screen when resume from sleep/hibernation after loading default BIOS in F10 setup interface..
-Fixed issue where IPv4 option is missing under Boot Order after flashing BIOS by Network BIOS Update and reboot.
-Fixed issue where "Legacy bootable disk" will be lost when hot plugging USB LAN dongle then pressing "Ctrl +Alt +Del" Key combination to boot to F9.
-Fixed issue where system with Pyrite SSC V2.0 NVMe drive could not boot into OS after enable DriveLock then disable it.
-Fixed issue where "Continue Boot" is not translated in startup Menu after language is set in F10.
-Locks power button function during TPM firmware update process to avoid firmware corruption.
-Fixed issue where Keyboard drop-down menu still shows as English at Power-On Authentication page after changing the Keyboard Layout to non-English and selecting the standard user with the new password at the Power-On Authentication page.
-Fixed issue where user cannot exit MEBx (F6) by pressing Y or N key when setting language to Russian/Deutsch in F10.
-Fixed issue where incorrect audio controller device shows in advanced system information in F10 setup interface. -Adds a feature "HP Application Driver" in F10 setup interface to support HP fusion application.
-Update CCG5 PD firmware to 6.6.
-Update Intel reference code to 7.0.47.50.
-Enhancement to address security vulnerabilities CVE-2018-12126, CVE-2018-12127, CVE-2018-12130.
-Enhancement to address security vulnerabilities CVE-2019-0086, CVE-2019-0090, CVE-2019-0091, CVE-2019-0092, CVE-2019-0093, CVE-2019-0094, CVE-2019-0096, CVE-2019-0097, CVE-2019-0098.
-Fixes issue where Serial COM11 device is disabled after RTC reset.
-Fixed issue where BIOS update via F10 setup interface failed and report: "Internal error" when set schedule to daily/weekly/monthly.
-Fixed issue where SystemDiags.log file does not be created in FTP server after execute Remote HP PC Hardware Diagnostics.
-Fixed issue where "Authentication Failed" screen displayed when enable BIOS password under F10 and Power-on Authentication in HPCSM, then uncheck "BIOS Administrator visible at Power-on Authentication" under F10 setup interface.
-Fixed issue where display of TPM Firmware Update interface is cut off during update process. -Updates VBIOS to enhnace compatibility for new LGD pannel.
-Adds a feature to separately control "Intel Management Engine (ME)" and "Intel Active Management (AMT)" individually.
-Updates the Intel silicon reference code to 7.0.5C.50.
-Update Intel ME firmware to 12.0.39.1431.
-Add a feature "Native OS Firmware Update Service" in F10 setup interface to enable/disable firmware update via Window Update service.
-Fixes issue where system reports error "Failure during data transfer (maximum downloaded content size exceeded)" when unit tries to update firmware via FTP server with proxy from F10 setup interface.
-Fixes issue where system intermittently enters hibernation after idle around 2 hours in battery mode when HP Sure Run and Bitlocker is enabled.
-Fixes issue where specific SanDisk USB drive does not be listed in F9 Boot Menu. This BIOS upgrade package also includes the following firmware versions: (only list appropriate ones)
Intel Management Engine Corporate v 12.0.45.1509
SIO19 F/W 7.9.44
Intel VBIOS 9.2.1014 (2018/07/04)
Intel GOP 9.0.1075 (2018/03/05)
USB Type-C PD firmware FW 6.8.0
Intel/Realtek PXE rom IBS GE v0.1.13
Intel/Realtek UEFI PXE rom Efi v0.0.19
-Enhancement to address security vulnerabilities CVE-2019-0123, CVE-2019-0117, CVE-2019-11135, CVE-2019-11139, CVE-2019-0185.
-Enhancement to address security vulnerabilities CVE-2019-0131, CVE-2019-0165, CVE-2019-0166, CVE-2019-0168, CVE-2019-0169, CVE-2019-11086, CVE-2019-11087, CVE-2019-11088, CVE-2019-11090, CVE-2019-11097, CVE-2019-11100, CVE-2019-11101, CVE-2019-11102, CVE-2019-11103, CVE-2019-11104, CVE-2019-11105, CVE-2019-11106, CVE-2019-11107, CVE-2019-11108, CVE-2019-11109, CVE-2019-11110, CVE-2019-11131, CVE-2019-11132, CVE-2019-11147.
-Enhancement to address security vulnerabilities CVE-2019-0123, CVE-2019-0117.
-Enhancement to address security vulnerabilities CVE-2019-0185, CVE-2019-0152, CVE-2019-11136, CVE-2019-11137.
-Updates SuperIO firmware to v7.9.44 for stability enhancement.
-Updates Cypress PD firmware to v6.8 for compatibility enhancement.
-Adds a feature to seprate Administrator/User DriveLock password in F10 setup interface.
-Adds a feature to query DriveLock setting by HP BIOS Configuration Utility (BCU).
-Adds a feature to support Enhanced Secure Erase command for ATA drive in F10 setup interface.
- Fixes issue where system prompts Power on Authentication with BIOS Administrator and POST Power-On Password options before scheduled BIOS update.
- Fixes an issue which causes the system to boot slower than expected when a network cable is used to connect the system to a Dell or Targus USB Display Link Dock.
- Fixes issue where system BIOS fails to be updated and reported "Failed to determine if new BIOS is available" without setting Proxy Server in F10 setup interface.
- Fixed an issue where "Retail Basic or ElitePOS Advanced I/O Connectivity Base" PUSB and Cash drawer ports don't have power when system wakes from sleep.
- Fixes an issue where extra characters "Enabled by default. [Help Icon]=" shows up in the help message of "Intel Management Engine (ME)" option. This BIOS upgrade package also includes the following firmware versions: (only list appropriate ones)
Intel Management Engine Corporate v 12.0.49.1534
SIO19 F/W 7.9.50
Intel VBIOS 9.2.1014 (2018/07/04)
Intel GOP 9.0.1075 (2018/03/05)
USB Type-C PD firmware FW 6.8.0
Intel/Realtek PXE rom IBS GE v0.1.13
Intel/Realtek UEFI PXE rom Efi v0.0.19
- Adds a feature to support Automatic DriveLock feature in F10 setup interface for Pyrite NVMe SSD."
- Updates the CPU microcode for Intel processors to 0xCA.
- Updates Intel ME Firmware to 12.0.49.1534.
- Updates SuperIO firmware to v7.9.50 for stability enhancement.
- Fixes an issue where system displays "Enter current DriveLock Password" message when enabling Automatic Drivelock then restarting system several times.
- Fixes an issue where Automatic DriveLock option is enabled and greyed out after BIOS Administrator Password is removed.
- Fixes an issue where original boot entry is deleted while third party encryption software creates their own boot entry.
- Fixes an issue where system firmware is updated from recovery partition instead of EFI partition.
- Fixes an issue where hard drive still prompts DriveLock password after forcing the Master password to match BIOS Administrator Password.
- Fixes an issue where system cannot enable "Automatic Drivelock" after placing a hard drive into another system and disabling Automatic Drivelock by another system.
- Fixes an issue where system cannot enable "Automatic DriveLock" option for NVMe SSD after "create BIOS Administrator password" in F10.
- Fixes an issue where system does not prompt for Power on Authentication with BIOS Administrator and POST Power-On Password options when schedule update check is failed.
- Fixes an issue where 23.8 inch touch panel shows obvious ripple or block. - Enhancement to address security vulnerabilities CVE-2020-0543, CVE-2020-0548, CVE-2020-0549.
- Enhancement to address security vulnerabilities CVE-2020-0528, CVE-2020-0529.
- Upgrade Intel Reference Code to 7.0.6E.40 for compatibility enhancement.
Version 2.11.01
This BIOS upgrade package also includes the following firmware versions: (only list appropriate ones)
Intel Management Engine Corporate v 12.0.64.1551
SIO19 F/W 7.9.44
Intel VBIOS 9.2.1014 (2018/07/04)
Intel GOP 9.0.1075 (2018/03/05)
USB Type-C PD firmware FW 6.8.0
Intel/Realtek PXE rom IBS GE v0.1.13
Intel/Realtek UEFI PXE rom Efi v0.0.19
- Enhancement to address security vulnerabilities CVE-2020-0531, CVE-2020-0532, CVE-2020-0534, CVE-2020-0535, CVE-2020-0536, CVE-2020-0537, CVE-2020-0538, CVE-2020-0539, CVE-2020-0540, CVE-2020-0541, CVE-2020-0542.
- Adds Drivelock password feature support on OPAL SED NVMe SSD.
-Fixes an issue where original boot entry is deleted while third-party encryption software creates its own boot entry.
-Fixes an issue where Automatic DriveLock option is enabled and greyed out after the BIOS Administrator Password is removed.
-Fixes an issue where system does not boot to OS directly when choosing "Postpone this BIOS until the next Reboot" option at scheduled BIOS update via F10 setup interface.
-Fixes an issue where message of Physical Presence Interface displays incomplete when changing to non-English language.
-Fixes an issue where system unexpectedly hangs when an EFI folder is created in Recovery partition. - Adds"Wake on LAN Power-on Password Policy" feature in F10 setup interface.
- Adds "Allow User to Modify Power-on Password" feature in F10 setup interface.
-Enhancement to address security vulnerabilities CVE-2020-0543, CVE-2020-0548, CVE-2020-0549, CVE-2020-8758, CVE-2020-8672
This BIOS upgrade package also includes the following firmware versions:
Intel Management Engine Corporate 12.0.68.1606 (Production)
SIO FW 7.9.50
Cypress FW rev. (Type-C) FW 6.8.0
VBIOS Intel: 1009(2020/02/19)
AMD VBIOS Samsung/Hynix : BR31728_001.rom
Micron : BR36108_M01.rom
GOP EFI Driver 9.0.1075(2020/02/25)
PXE option ROM 0.1.13
PXE UEFI Driver 0.0.19
-Fixes issue where system takes a long time to resume from sleep when Video Memory is changed to 512 MB. -Enhancement to address security vulnerabilities CVE-2020-8696, CVE-2020-8695, CVE-2020-8694.
-Enhancement to address security vulnerabilities CVE-2020-8744, CVE-2020-8745, CVE-2020-8746, CVE-2020-8747, CVE-2020-8749, CVE-2020-8752, CVE-2020-8753, CVE-2020-8754, CVE-2020-8756, CVE-2020-8757, CVE-2020-8760, CVE-2020-8705, CVE-2020-12297, CVE-2020-12303, CVE-2020-12355, CVE-2020-12356.
-Critical Security Update.
-Adds a feature "HP Sure Admin" support in F10 setup interface.
NOTE: Due to HP Sure Admin feature support, system is not compatible with older BIOS version once it is enabled, attempts to install older BIOS versions will be blocked."
-This BIOS upgrade package also includes the following firmware versions:
Intel Management Engine Corporate 12.0.70.1652 (Production)
SIO FW 7.9.51
Cypress FW rev. (Type-C) FW 6.8.0
VBIOS Intel: 1009(2020/02/19)
AMD VBIOS Samsung/Hynix : BR31728_001.rom
Micron : BR36108_M01.rom
GOP EFI Driver 9.0.1075(2020/02/25)
PXE option ROM 0.1.13
PXE UEFI Driver 0.0.19
-This BIOS upgrade package also includes the following firmware versions:
Intel Management Engine Corporate 12.0.70.1652 (Production)
SIO FW 7.9.51
Cypress FW rev. (Type-C) FW 6.8.0
VBIOS Intel: 1009(2020/02/19)
AMD VBIOS Samsung/Hynix : BR31728_001.rom
Micron : BR36108_M01.rom
GOP EFI Driver 9.0.1075(2020/02/25)
PXE option ROM 0.1.13
PXE UEFI Driver 0.0.19
- Fixes an issue where the system cannot resume from S3 with both PCIE x16 graphics card and PS/2 devices installed. - Adds a feature "IPv6 during UEFI Boot" in F10 setup interface where user has ability to disable IPv6 during preboot phase.
- Enhancement to address security vulnerabilities CVE-2020-8703, CVE-2020-8704, CVE-2020-24506 and CVE-2020-24507.
- Enhancement to address security vulnerabilities CVE-2020-24512, CVE-2020-24511.
- Fixes issue where system stops at Network BIOS Update screen after executing a network connection check and triggering "Update System BIOS" via F10 setup menu in legacy boot mode.
- Fixes issue where Bitlocker unlock over network intermittently fails on specific network configuration. - Enhancement to address security vulnerabilities CVE-2021-0107, CVE-2021-0111, CVE-2021-0114, CVE-2021-0115, CVE-2021-0116, CVE-2021-0117, CVE-2021-0118, CVE-2021-0119, CVE-2021-0124, CVE-2021-0125.
- Enhancement to address security vulnerabilities CVE-2021-0091, CVE-2021-0156, CVE-2021-0157.
- Enhancement to address security vulnerabilities CVE-2021-0127.
- Update ME firmware to 12.0.85.1869.
- Enhancement to address security vulnerabilities CVE-2021-33107.
Intel Management Engine Corporate v 12.0.90.2072 (Production)
SIO19 F/W 7.9.51
Intel VBIOS 9.2.1014 (2018/07/04)
Intel GOP 9.0.1075 (2018/03/05)
USB Type-C PD firmware FW 6.8.0
Intel/Realtek PXE rom IBS GE v0.1.13
Intel/Realtek UEFI PXE rom Efi v0.0.19
- Enhancement to address security vulnerabilities CVE-2022-31635, CVE-2022-31636, CVE-2022-31637, CVE-2022-31638, CVE-2022-31639.
- Enhancement to address security vulnerabilities CVE-2022-31640, CVE-2022-31641, CVE-2022-31642.
Intel Management Engine Corporate v 12.0.93.2331 (Production)
SIO19 F/W 7.9.51
Intel VBIOS 9.2.1014 (2018/07/04)
Intel GOP 9.0.1075 (2018/03/05)
USB Type-C PD firmware FW 6.8.0
Intel/Realtek PXE rom IBS GE v0.1.13
Intel/Realtek UEFI PXE rom Efi v0.0.19
-Integrate Infineon TPM EFI Driver v02.02.3776.00
-Enhancement to address security vulnerabilities CVE-2022-44611
-Enhancement to address security vulnerabilities CVE-2022-40982
-Updates Intel MCU for compatibility enhancement
-Enhancement to address security vulnerabilities CVE-2022-29871
-Updates Intel ACM for compatibility enhancement
Intel Management Engine Corporate v 12.0.93.2331 (Production)
SIO19 F/W 7.9.51
Intel VBIOS 9.2.1014 (2018/07/04)
Intel GOP 9.0.1075 (2018/03/05)
USB Type-C PD firmware FW 6.8.0
Intel/Realtek PXE rom IBS GE v0.1.13
Intel/Realtek UEFI PXE rom Efi v0.0.19
-Enhancement to support SMBIOS type1 version string for 'db' addition.
-Enhancements to secure boot keys protection.
-Enhancement to address security vulnerabilities CVE-2023-25756, CVE-2023-22329"
- HP strongly recommends updating system BIOS to address a potential issue with HP Sure Start that can cause some devices to experience a SecureBoot error at boot.
12-30-2023 03:34 PM
Hi:
According to the product specs the max is the i7-8700T for the 35W option.
HP ProOne 400 20-in and 23.8-in G4 AiO Business PC Specifications | HP® Customer Support
12-30-2023 03:53 PM
You're very welcome.
I doubt the G4 supports 9th gen core processors.
The ProOne 440 G5 comes with those processors.
You can read all of the release notes for all of the BIOS updates below and none of them add support for newer processors.
- Provides security update with new ME FW
- Fixes "System Security Issue has been detected" when doing Windows System Restore with HP Sure Run activated on Windows 10 RS4 OS. - Adds Event logs in F10 BIOS menu.
- Adds new details in "System Information Tab" in F10 BIOS menu.
- Updates CCG5 FW to 6.3(Signed).
- Updates SIO FW to 7.9.34.
-Fixes issue where Bitlocker cannot be unlocked over network.
-Fixes issue where system updates firmware from EFI partition of system drive instead of USB drive when selecting "Update System and Supported Device Firmware Using Local Media" from BIOS setup (F10).
-Fixes issue where virtual touch keyboard still displays in HP logo screen after entering correct PIN code.
-Fixes issue where changes made in BIOS Setup (F10) after a failed PXE boot would not be saved.
-Fixes issue where system hangs in POST when plugging in the Apple USB-C HDMI/VGA Multiport Adapter.
-Fixes issue where BIOS updates triggered by Windows Update does not occur after inputting the incorrect Admin password then inputting correct password.
-Fixes issue where system still updates ME and Cypress PD Firmware when entering incorrect BIOS administrator password.
-Fixes issue where Absolute Persistence function would not work while HP Sure Run is activated.
-Fixes audio output distortion issue while plugging in a 3rd-party AC adapter.
-Fixes issue where ME firmware update process stops around 60 to 120 seconds when connecting HP Thunderbolt Dock during update process.
-Fixes issue where system still pop out Physical Presence Interface when disabling Intel SGX in BIOS setup (F10) with Physical Presence Interface setting disabled.
-Fixes issue where "RFID" option disappears in BIOS setup (F10) after disabling it.
-Fixes issue where system will resume from sleep via Collaboration Buttons when it is disabled in BIOS setup (F10). -Adds Russian Language Support in F10 setup interface.
-Adds a feature to hide BIOS administrator account in Power-On Authentication screen.
-Increases PXE IP time-to-live (TTL) value to improve compatibility with diverse end-user network environments.
-Adds Drivelock password feature support on Pyrite NVMe SSD.
-Improves Japanese touch keyboard layout.
-Updates the Intel silicon reference code for compatibility enhancement.
-Updates the CPU microcode for Intel processors to 0x9A.
-Enhancement to address security vulnerabilities CVE-2018-12201, CVE-2018- 12202, CVE-2018-12203, CVE-2018-12204, CVE-2018-12205.
-Enhancement to address security vulnerabilities CVE-2018-12188, CVE-2018-12189, CVE-2018-12190, CVE-2018-12191, CVE-2018-12192, CVE-2018-12199, CVE-2018-12198, CVE-2018-12200, CVE-2018-12187, CVE-2018-12196, CVE-2018-12185, CVE-2018-12208
-Fixed issue where user cannot exit MEBx (F6) by pressing Y or N key when setting language to Russian in F10 setup.
-Fixed issue where intermittently USB Type-C device shows yellow bang in device manager when resume from sleep.
-Fixed a timing issue bundle with Intel i210 add-on card which will cause "Wake on LAN/Wake on Link" fail.
-Fixed issue where system will hang with black screen when resume from sleep/hibernation after loading default BIOS in F10 setup interface..
-Fixed issue where IPv4 option is missing under Boot Order after flashing BIOS by Network BIOS Update and reboot.
-Fixed issue where "Legacy bootable disk" will be lost when hot plugging USB LAN dongle then pressing "Ctrl +Alt +Del" Key combination to boot to F9.
-Fixed issue where system with Pyrite SSC V2.0 NVMe drive could not boot into OS after enable DriveLock then disable it.
-Fixed issue where "Continue Boot" is not translated in startup Menu after language is set in F10.
-Locks power button function during TPM firmware update process to avoid firmware corruption.
-Fixed issue where Keyboard drop-down menu still shows as English at Power-On Authentication page after changing the Keyboard Layout to non-English and selecting the standard user with the new password at the Power-On Authentication page.
-Fixed issue where user cannot exit MEBx (F6) by pressing Y or N key when setting language to Russian/Deutsch in F10.
-Fixed issue where incorrect audio controller device shows in advanced system information in F10 setup interface. -Adds a feature "HP Application Driver" in F10 setup interface to support HP fusion application.
-Update CCG5 PD firmware to 6.6.
-Update Intel reference code to 7.0.47.50.
-Enhancement to address security vulnerabilities CVE-2018-12126, CVE-2018-12127, CVE-2018-12130.
-Enhancement to address security vulnerabilities CVE-2019-0086, CVE-2019-0090, CVE-2019-0091, CVE-2019-0092, CVE-2019-0093, CVE-2019-0094, CVE-2019-0096, CVE-2019-0097, CVE-2019-0098.
-Fixes issue where Serial COM11 device is disabled after RTC reset.
-Fixed issue where BIOS update via F10 setup interface failed and report: "Internal error" when set schedule to daily/weekly/monthly.
-Fixed issue where SystemDiags.log file does not be created in FTP server after execute Remote HP PC Hardware Diagnostics.
-Fixed issue where "Authentication Failed" screen displayed when enable BIOS password under F10 and Power-on Authentication in HPCSM, then uncheck "BIOS Administrator visible at Power-on Authentication" under F10 setup interface.
-Fixed issue where display of TPM Firmware Update interface is cut off during update process. -Updates VBIOS to enhnace compatibility for new LGD pannel.
-Adds a feature to separately control "Intel Management Engine (ME)" and "Intel Active Management (AMT)" individually.
-Updates the Intel silicon reference code to 7.0.5C.50.
-Update Intel ME firmware to 12.0.39.1431.
-Add a feature "Native OS Firmware Update Service" in F10 setup interface to enable/disable firmware update via Window Update service.
-Fixes issue where system reports error "Failure during data transfer (maximum downloaded content size exceeded)" when unit tries to update firmware via FTP server with proxy from F10 setup interface.
-Fixes issue where system intermittently enters hibernation after idle around 2 hours in battery mode when HP Sure Run and Bitlocker is enabled.
-Fixes issue where specific SanDisk USB drive does not be listed in F9 Boot Menu. This BIOS upgrade package also includes the following firmware versions: (only list appropriate ones)
Intel Management Engine Corporate v 12.0.45.1509
SIO19 F/W 7.9.44
Intel VBIOS 9.2.1014 (2018/07/04)
Intel GOP 9.0.1075 (2018/03/05)
USB Type-C PD firmware FW 6.8.0
Intel/Realtek PXE rom IBS GE v0.1.13
Intel/Realtek UEFI PXE rom Efi v0.0.19
-Enhancement to address security vulnerabilities CVE-2019-0123, CVE-2019-0117, CVE-2019-11135, CVE-2019-11139, CVE-2019-0185.
-Enhancement to address security vulnerabilities CVE-2019-0131, CVE-2019-0165, CVE-2019-0166, CVE-2019-0168, CVE-2019-0169, CVE-2019-11086, CVE-2019-11087, CVE-2019-11088, CVE-2019-11090, CVE-2019-11097, CVE-2019-11100, CVE-2019-11101, CVE-2019-11102, CVE-2019-11103, CVE-2019-11104, CVE-2019-11105, CVE-2019-11106, CVE-2019-11107, CVE-2019-11108, CVE-2019-11109, CVE-2019-11110, CVE-2019-11131, CVE-2019-11132, CVE-2019-11147.
-Enhancement to address security vulnerabilities CVE-2019-0123, CVE-2019-0117.
-Enhancement to address security vulnerabilities CVE-2019-0185, CVE-2019-0152, CVE-2019-11136, CVE-2019-11137.
-Updates SuperIO firmware to v7.9.44 for stability enhancement.
-Updates Cypress PD firmware to v6.8 for compatibility enhancement.
-Adds a feature to seprate Administrator/User DriveLock password in F10 setup interface.
-Adds a feature to query DriveLock setting by HP BIOS Configuration Utility (BCU).
-Adds a feature to support Enhanced Secure Erase command for ATA drive in F10 setup interface.
- Fixes issue where system prompts Power on Authentication with BIOS Administrator and POST Power-On Password options before scheduled BIOS update.
- Fixes an issue which causes the system to boot slower than expected when a network cable is used to connect the system to a Dell or Targus USB Display Link Dock.
- Fixes issue where system BIOS fails to be updated and reported "Failed to determine if new BIOS is available" without setting Proxy Server in F10 setup interface.
- Fixed an issue where "Retail Basic or ElitePOS Advanced I/O Connectivity Base" PUSB and Cash drawer ports don't have power when system wakes from sleep.
- Fixes an issue where extra characters "Enabled by default. [Help Icon]=" shows up in the help message of "Intel Management Engine (ME)" option. This BIOS upgrade package also includes the following firmware versions: (only list appropriate ones)
Intel Management Engine Corporate v 12.0.49.1534
SIO19 F/W 7.9.50
Intel VBIOS 9.2.1014 (2018/07/04)
Intel GOP 9.0.1075 (2018/03/05)
USB Type-C PD firmware FW 6.8.0
Intel/Realtek PXE rom IBS GE v0.1.13
Intel/Realtek UEFI PXE rom Efi v0.0.19
- Adds a feature to support Automatic DriveLock feature in F10 setup interface for Pyrite NVMe SSD."
- Updates the CPU microcode for Intel processors to 0xCA.
- Updates Intel ME Firmware to 12.0.49.1534.
- Updates SuperIO firmware to v7.9.50 for stability enhancement.
- Fixes an issue where system displays "Enter current DriveLock Password" message when enabling Automatic Drivelock then restarting system several times.
- Fixes an issue where Automatic DriveLock option is enabled and greyed out after BIOS Administrator Password is removed.
- Fixes an issue where original boot entry is deleted while third party encryption software creates their own boot entry.
- Fixes an issue where system firmware is updated from recovery partition instead of EFI partition.
- Fixes an issue where hard drive still prompts DriveLock password after forcing the Master password to match BIOS Administrator Password.
- Fixes an issue where system cannot enable "Automatic Drivelock" after placing a hard drive into another system and disabling Automatic Drivelock by another system.
- Fixes an issue where system cannot enable "Automatic DriveLock" option for NVMe SSD after "create BIOS Administrator password" in F10.
- Fixes an issue where system does not prompt for Power on Authentication with BIOS Administrator and POST Power-On Password options when schedule update check is failed.
- Fixes an issue where 23.8 inch touch panel shows obvious ripple or block. - Enhancement to address security vulnerabilities CVE-2020-0543, CVE-2020-0548, CVE-2020-0549.
- Enhancement to address security vulnerabilities CVE-2020-0528, CVE-2020-0529.
- Upgrade Intel Reference Code to 7.0.6E.40 for compatibility enhancement.
Version 2.11.01
This BIOS upgrade package also includes the following firmware versions: (only list appropriate ones)
Intel Management Engine Corporate v 12.0.64.1551
SIO19 F/W 7.9.44
Intel VBIOS 9.2.1014 (2018/07/04)
Intel GOP 9.0.1075 (2018/03/05)
USB Type-C PD firmware FW 6.8.0
Intel/Realtek PXE rom IBS GE v0.1.13
Intel/Realtek UEFI PXE rom Efi v0.0.19
- Enhancement to address security vulnerabilities CVE-2020-0531, CVE-2020-0532, CVE-2020-0534, CVE-2020-0535, CVE-2020-0536, CVE-2020-0537, CVE-2020-0538, CVE-2020-0539, CVE-2020-0540, CVE-2020-0541, CVE-2020-0542.
- Adds Drivelock password feature support on OPAL SED NVMe SSD.
-Fixes an issue where original boot entry is deleted while third-party encryption software creates its own boot entry.
-Fixes an issue where Automatic DriveLock option is enabled and greyed out after the BIOS Administrator Password is removed.
-Fixes an issue where system does not boot to OS directly when choosing "Postpone this BIOS until the next Reboot" option at scheduled BIOS update via F10 setup interface.
-Fixes an issue where message of Physical Presence Interface displays incomplete when changing to non-English language.
-Fixes an issue where system unexpectedly hangs when an EFI folder is created in Recovery partition. - Adds"Wake on LAN Power-on Password Policy" feature in F10 setup interface.
- Adds "Allow User to Modify Power-on Password" feature in F10 setup interface.
-Enhancement to address security vulnerabilities CVE-2020-0543, CVE-2020-0548, CVE-2020-0549, CVE-2020-8758, CVE-2020-8672
This BIOS upgrade package also includes the following firmware versions:
Intel Management Engine Corporate 12.0.68.1606 (Production)
SIO FW 7.9.50
Cypress FW rev. (Type-C) FW 6.8.0
VBIOS Intel: 1009(2020/02/19)
AMD VBIOS Samsung/Hynix : BR31728_001.rom
Micron : BR36108_M01.rom
GOP EFI Driver 9.0.1075(2020/02/25)
PXE option ROM 0.1.13
PXE UEFI Driver 0.0.19
-Fixes issue where system takes a long time to resume from sleep when Video Memory is changed to 512 MB. -Enhancement to address security vulnerabilities CVE-2020-8696, CVE-2020-8695, CVE-2020-8694.
-Enhancement to address security vulnerabilities CVE-2020-8744, CVE-2020-8745, CVE-2020-8746, CVE-2020-8747, CVE-2020-8749, CVE-2020-8752, CVE-2020-8753, CVE-2020-8754, CVE-2020-8756, CVE-2020-8757, CVE-2020-8760, CVE-2020-8705, CVE-2020-12297, CVE-2020-12303, CVE-2020-12355, CVE-2020-12356.
-Critical Security Update.
-Adds a feature "HP Sure Admin" support in F10 setup interface.
NOTE: Due to HP Sure Admin feature support, system is not compatible with older BIOS version once it is enabled, attempts to install older BIOS versions will be blocked."
-This BIOS upgrade package also includes the following firmware versions:
Intel Management Engine Corporate 12.0.70.1652 (Production)
SIO FW 7.9.51
Cypress FW rev. (Type-C) FW 6.8.0
VBIOS Intel: 1009(2020/02/19)
AMD VBIOS Samsung/Hynix : BR31728_001.rom
Micron : BR36108_M01.rom
GOP EFI Driver 9.0.1075(2020/02/25)
PXE option ROM 0.1.13
PXE UEFI Driver 0.0.19
-This BIOS upgrade package also includes the following firmware versions:
Intel Management Engine Corporate 12.0.70.1652 (Production)
SIO FW 7.9.51
Cypress FW rev. (Type-C) FW 6.8.0
VBIOS Intel: 1009(2020/02/19)
AMD VBIOS Samsung/Hynix : BR31728_001.rom
Micron : BR36108_M01.rom
GOP EFI Driver 9.0.1075(2020/02/25)
PXE option ROM 0.1.13
PXE UEFI Driver 0.0.19
- Fixes an issue where the system cannot resume from S3 with both PCIE x16 graphics card and PS/2 devices installed. - Adds a feature "IPv6 during UEFI Boot" in F10 setup interface where user has ability to disable IPv6 during preboot phase.
- Enhancement to address security vulnerabilities CVE-2020-8703, CVE-2020-8704, CVE-2020-24506 and CVE-2020-24507.
- Enhancement to address security vulnerabilities CVE-2020-24512, CVE-2020-24511.
- Fixes issue where system stops at Network BIOS Update screen after executing a network connection check and triggering "Update System BIOS" via F10 setup menu in legacy boot mode.
- Fixes issue where Bitlocker unlock over network intermittently fails on specific network configuration. - Enhancement to address security vulnerabilities CVE-2021-0107, CVE-2021-0111, CVE-2021-0114, CVE-2021-0115, CVE-2021-0116, CVE-2021-0117, CVE-2021-0118, CVE-2021-0119, CVE-2021-0124, CVE-2021-0125.
- Enhancement to address security vulnerabilities CVE-2021-0091, CVE-2021-0156, CVE-2021-0157.
- Enhancement to address security vulnerabilities CVE-2021-0127.
- Update ME firmware to 12.0.85.1869.
- Enhancement to address security vulnerabilities CVE-2021-33107.
Intel Management Engine Corporate v 12.0.90.2072 (Production)
SIO19 F/W 7.9.51
Intel VBIOS 9.2.1014 (2018/07/04)
Intel GOP 9.0.1075 (2018/03/05)
USB Type-C PD firmware FW 6.8.0
Intel/Realtek PXE rom IBS GE v0.1.13
Intel/Realtek UEFI PXE rom Efi v0.0.19
- Enhancement to address security vulnerabilities CVE-2022-31635, CVE-2022-31636, CVE-2022-31637, CVE-2022-31638, CVE-2022-31639.
- Enhancement to address security vulnerabilities CVE-2022-31640, CVE-2022-31641, CVE-2022-31642.
Intel Management Engine Corporate v 12.0.93.2331 (Production)
SIO19 F/W 7.9.51
Intel VBIOS 9.2.1014 (2018/07/04)
Intel GOP 9.0.1075 (2018/03/05)
USB Type-C PD firmware FW 6.8.0
Intel/Realtek PXE rom IBS GE v0.1.13
Intel/Realtek UEFI PXE rom Efi v0.0.19
-Integrate Infineon TPM EFI Driver v02.02.3776.00
-Enhancement to address security vulnerabilities CVE-2022-44611
-Enhancement to address security vulnerabilities CVE-2022-40982
-Updates Intel MCU for compatibility enhancement
-Enhancement to address security vulnerabilities CVE-2022-29871
-Updates Intel ACM for compatibility enhancement
Intel Management Engine Corporate v 12.0.93.2331 (Production)
SIO19 F/W 7.9.51
Intel VBIOS 9.2.1014 (2018/07/04)
Intel GOP 9.0.1075 (2018/03/05)
USB Type-C PD firmware FW 6.8.0
Intel/Realtek PXE rom IBS GE v0.1.13
Intel/Realtek UEFI PXE rom Efi v0.0.19
-Enhancement to support SMBIOS type1 version string for 'db' addition.
-Enhancements to secure boot keys protection.
-Enhancement to address security vulnerabilities CVE-2023-25756, CVE-2023-22329"
- HP strongly recommends updating system BIOS to address a potential issue with HP Sure Start that can cause some devices to experience a SecureBoot error at boot.