-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Hardware and Upgrade Questions
- Radiator Fan Airflow Direction

Create an account on the HP Community to personalize your profile and ask a question
06-23-2016 09:01 PM
Hi,
Can anybody tell me the answer exactyly about the airflow for the radiator fan? Which picture should be the correct way? Picture 1 or Picture 2?
I get confusing on this thing.
Besides, I would like to buy crosair SP fan to replace the HP stock fan.
Thank you in advance for your reply.
Alan
PICTURE 1
PICTURE 2
Solved! Go to Solution.
Accepted Solutions
06-23-2016 10:08 PM
Hi,
The airflow should be moving the hot air away from the component and out of the tower.
A radiator in my example would be a CPU radiator in a liquid cooled system. The radiator is at the back of the tower.
Your 1st method would push the hot air out of the tower.
This is the desired airflow to keep the ambient air temp in the case as cool as possible.
Jay
06-23-2016 09:46 PM
Greetings,
Your pics are not yet viewable at this time.
Front fans draw cool air in.
Rear fans push warm air out of the tower.
Radiator fans will push warm air away from the CPU and out of the tower from the rear or top of the tower.
Cheers!
06-23-2016 09:57 PM
Hi Jay,
Thank you so much for your reply.
Im sorry about the picture.
For your information, I only have one fan behind the radiator. Im wondering whether the air should be towards the radiator then out to the tower.
This is my build.
" >" means "facing to"
Fan>RADIATOR>Tower
So here are 2 ways. Which one is the correct way?
1st Method
air flow to >>>>>> RADIATOR >>>>>> Out to the tower?
(Push) (Push)
Or
2nd Method
Air flow <<<<<<< Radiator<<<<<< tower
(Pull) (Pull)
Thanks
Alan
06-23-2016 10:08 PM
Hi,
The airflow should be moving the hot air away from the component and out of the tower.
A radiator in my example would be a CPU radiator in a liquid cooled system. The radiator is at the back of the tower.
Your 1st method would push the hot air out of the tower.
This is the desired airflow to keep the ambient air temp in the case as cool as possible.
Jay