Replacing the power supply for a HP Envy

[DMahl]

I need to replace my power supply for my HP desktop. So, do I just buy and replace it with any power supply or is there a specific type I should purchase?

Thanks for any and all help!

[old_geekster]

@DMahl, welcome to the forum.

What is the full model or product number for the computer?  Please do not furnish the Serial # or other personal information.  Here is a guide to help you find the model.  I need this information to know the type of power supply unit (PSU) is being used.

[DMahl]

Yes, product/model number is:

Product No. X6F91AA#ABA

Model No. 750-437cb

[old_geekster · Accepted solution]

Thank you for the additional information, @DMahl.

Any ATX power supply unit (PSU) should work as long as it fits into the space provided.  The best way to tell is measure the current PSU.  I like Corsair products.  You might want to consider a modular PSU since you have a mid-size case.  I recommend at least 500W.

Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.

[DMahl]

Thank you so much. I will order one ASAP. 

[sigmapol]

Would you please help me too?

I have the same question and this is my HP product number: 4AB23AVT#ABA

Thanks in advance!

[old_geekster]

@sigmapol , welcome back to the forum.

It is always best if you start your own thread.  However, since you have posted here, I will try to help you.

The model that you provided doesn't appear to be correct.  Please check it and provide the correct model of product number.

[sigmapol]

Thanks for your response Old_geekster

I realized it (that it is best if I start my own thread as you adviced) after asking to you in this thread and since I thought nobody would answer here I opened other: https://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/I-need-to-replace-my-power-supp...

Any help is welcome

Thank you very much!

[Jaycob0728]

Can I use the FPS Hyper M85 for my hp envy 750-124?

And are there any separate cables I need?

[old_geekster]

@Jaycob0728 , welcome back to the forum.

Please start your own thread.  You will get more support.