SSD not recognized.

MirkoG · ‎08-04-2020

Internal SSD Crucial MX500 1TB CT1000MX500SSD1(Z) not recognized.

If plugged into the secondary SATA channel (instead of the CD drive) causes booting issues. Im not able to access the BIOS or to any hard drive.

Same if I clone the orignal HD into the SSD. When I swap the two disk i'm not able to booth the system at all. I get a blue screen with message "Booting device not found" Hard disk unit - (3FO)

Pressing F2 to diangose the system result in a stuck system.

Tried to set up the universal driver for HDD, folowing troubleshooting guides, without any succes. At the very end i returned the SSD to the supplier but i need to change the HD now. Witch SSD is fully compliant.

Is there any protection feature against SS

Thank you in advance

Is there a compatibility issue between OS and this SATA SSD unit? I've tried with another HD and it works but i do need

wb2001 · ‎08-05-2020

@MirkoG,

This site recommends either Kingston or Samsung. Your should price it.

IMHO, go with Samsung. Their data migration software is excellent, and it is free.

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.

nakerakanti · ‎08-06-2020

try replug the ssd or reset factory the computer

Create an account on the HP Community to personalize your profile and ask a question