-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Hardware and Upgrade Questions
- Same 3.3 beep code with no display

Create an account on the HP Community to personalize your profile and ask a question
11-12-2023 12:34 AM
My PC Was working fine until one day when I turned it on PC It did not turn POST but showed a beep code 3.3 no display nothing the beep code beeps and shuts off no display..........
I have only 2 questions
1. Does replacing the card with any other will work? (i didnt try it out yet)
2. What if the motherboard has a fault it can't detect the graphics card?
11-12-2023 07:08 AM
According to this notebook document you have a graphics card problem. Correct me if I am wrong
Unless I am mistaken, your motherboard has built-in graphics. If you remove your graphics card then the internal graphics will work., See if your system boots up with the board removed.
Clean your system and especially the graphics card with an air duster.
Lemme know what works or not.
Thank you for using HP products and posting to the community.
I am a community volunteer and do not work for HP. If you find
this post useful click the Yes button. If I helped solve your
problem please mark this as a solution so others can find it