cancel
Showing results for 
Search instead for 
Did you mean: 
Neelmani
New member
4 1 0 0
Message 1 of 4
1,022
Flag Post

Upgrade Intel Optane to Samsung 970 evo plus nvme SSD

HP Recommended
Hp pavillion 360 14-cd0055tx
Microsoft Windows 10 (64-bit)

Hi,

 

I have removed my intel optane and inserted samsung 970 evo plus it is showing in disk management but in samsung magician it is not showing device health and other features such as for performance optimization showing this feature is not supported same for diagnostic scan as well.

 

I then installed my windows 10 on to the new SSD and rebooted from that still in magician showing same thing and when trying to install the Samsung nvme driver saying device is not connected please connect the device.

 

Please tell how should I solve this issue I am really irritated and frustated because of this.

 

Thanks in Advance!

 

 

 

3 REPLIES 3
banhien
Level 19
Level 19
94,809 93,466 12,281 26,112
Message 2 of 4
Flag Post
HP Recommended

@Neelmani 

 

Did you properly disable Optane before remove it ? Please try again using the following steps

 

  1. Use Intel Rapid Storage Technology program to disable the Optane memory.
  2. Shut down and remove the Optane card from the M.2 slot and install the M.2 SSD card.
  3. Use a cloning software to clone the HDD to the M.2 SSD.
  4. Shut down and remove the Hard drive (keep it as backup for few days or a week)  otherwise system will still boot from it.
  5. Then boot into BIOS and make sure the SSD in the M.2 slot is the boot device.

After few days or a week, format old HDD and put it back for secondary storage.

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




>
Was this reply helpful? Yes No
Neelmani
Author
New member
4 1 0 0
Message 3 of 4
Flag Post
HP Recommended

 

.@banhien

 

I have disabled it from the Intel rapid storage technology.

 

Is it all done from there or do I need to do something from intel optane and storage management and bios also ?

 

 

 

 

Was this reply helpful? Yes No
Nismomike
New member
1 1 0 0
Message 4 of 4
Flag Post
HP Recommended

I am dealing with a seemingly identical scenario. Same steps as you, but I cloned using Samsung Data Migration tool. Everything seems exactly as I'd expect, but I can't download the Samsung NVME driver and Magician doesn't give me full access to all features. I almost wouldn't care, but I want access to the proper drivers and Magician features. Did you find a solution yet? My bios are running in non-raid. 

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation