• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Locked

‎07-03-2020 08:17 AM - edited ‎07-03-2020 08:37 AM

HP Recommended
Product: HP ENVY 34 All In One 34-a051
Operating System: Microsoft Windows 10 (64-bit)

Can I upgrade the stock SSD (MZHPV128HDGM) to 512 G or 1T?

3 REPLIES 3

‎07-03-2020 03:22 PM - edited ‎07-03-2020 03:24 PM

HP Recommended

@Adman1,

Not sure where you found that number?   It referred to a Samsung NVMe device.

HP PartSurfer reference a part number that corresponded to an mSata device.

Can you verify source?

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.
Was this reply helpful? Yes No

‎07-04-2020 12:03 PM

HP Recommended

ITEM ONE:

>>Not sure where you found that number? It referred to a Samsung NVMe device.<<

That's the number on the SSD card.  This is the 128 SSD I want to upgrade to 512 GB or 1 TB.

 

ITEM TWO:

The computer has a HDD with following:

5V 800mA DC

SATA 6 0Gb

1 TB 7200 RPM

HDD: 7K 1000-1000

C P/N H2T10003272S

HTS721010A9E630

TYPE TS7SAF100

P/N 0J47783

MLC: DA7153

WWN:5400CCA8A8CA1BCA

Was this reply helpful? Yes No

‎07-04-2020 06:43 PM - edited ‎07-04-2020 06:50 PM

HP Recommended

@Adman1,

Then go for it.

If you going to clone the OS you will need an external NVMe to USB 3 adapter for the new SSD.  After cloning, swap out the SSD's.   The old 128GB now become an external device, as needed.

 

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.
Was this reply helpful? Yes No
Warning
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
Didn't find what you were looking for? Ask the community
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.