-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Hardware and Upgrade Questions
- Upgrade to 2 TB M.2 SSD drive

Create an account on the HP Community to personalize your profile and ask a question
11-30-2022 09:22 AM
I would like to upgrade the 256 GB M.2 SSD with a 2 TB one. Are 2 TB cards compatible with my Baker motherboard and is any brand compatible?
Solved! Go to Solution.
Accepted Solutions
12-06-2022 12:27 PM - edited 12-06-2022 12:28 PM
I bought a Samsung 2 TB 970 EVO Plus NVMe M.2 SSD and a Plugable USB Gen 2 NVMe SSD Enclosure. I put the new SSD card into the SSD Enclosure. I downloaded Samsung's free Magician and Data Migration Installer for Consumer. I then plugged the SSD Enclosure into a compact USB port (it also has a cable for standard USB) and ran the migration software. It cloned the existing SSD drive to the new 2 TB Drive then shut down the computer. I proceed to swap the new SSD card for the original, buttoned everything back up and restarted the computer.
It started right up and so far I have found zero problems. I'm beside myself about how easy the whole process went!
11-30-2022 10:19 AM
hi
difficult to tell you, you have to see if a user has already tested
Most often we will recommend the same models here
such as Samsung SSD 980
you can also try Crucial Scan, quite reliable
Welcome to Crucial USA
otherwise, as already proposed here
Solved: Re: SSD upgrade - max capacity - HP Support Community - 8207366
was this reply helpful , or just say thank you ? Click on the yes button
Please remember to mark the answers this can help other users
Desktop-Knowledge-Base
Windows 11 22h2 inside , user
------------------------------------------------------------------------------------------------------------
12-06-2022 12:27 PM - edited 12-06-2022 12:28 PM
I bought a Samsung 2 TB 970 EVO Plus NVMe M.2 SSD and a Plugable USB Gen 2 NVMe SSD Enclosure. I put the new SSD card into the SSD Enclosure. I downloaded Samsung's free Magician and Data Migration Installer for Consumer. I then plugged the SSD Enclosure into a compact USB port (it also has a cable for standard USB) and ran the migration software. It cloned the existing SSD drive to the new 2 TB Drive then shut down the computer. I proceed to swap the new SSD card for the original, buttoned everything back up and restarted the computer.
It started right up and so far I have found zero problems. I'm beside myself about how easy the whole process went!