-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Hardware and Upgrade Questions
- Upgrading HP DC 5800 MicroTower

Create an account on the HP Community to personalize your profile and ask a question
04-26-2020 06:19 PM
I want to upgrade this PC’s motherboard, it has a mATX form factor, with a intel core I 2 duo. If it is not possible to get another motherboard for a DC 5800 MicroTower, could I upgrade the CPU, if so which one would be Ideal?
Any help on the matter would appreciated
04-26-2020 06:33 PM
Hi:
The motherboards are proprietary, you would only be able to install a motherboard from another dc5800 in there.
Below is the link to the dc5800 quickspecs. The list of supported processors can be found on page 7.
04-26-2020 08:00 PM
You're very welcome.
You would not need a stronger power supply than the 300W one your notebook has now.
Doesn't matter anyway, as those cannot be upgraded either.
SSD...best if your PC has a RAID or AHCI BIOS storage controller setting. IDE is not that good for SSD's--performance wise.
I suppose you can install one regardless. I have one in a dc7800 (upscale, model of yours) and it works great. But mine has the AHCI drive controller setting.
Graphics card...I would get a used but tested and working Dell HD 6450 1 GB graphics card for your model.