Wifi card for hp prodesk 600 g2 sff

[Bendoom]

Hi everyone!

I want to put a wifi /bluetooth card in my Hp prodesk 600 G2 Sff but can’t be sure what would fit inside. What should i look for ? 
thanks a lot 

[Paul_Tikkanen · Accepted solution]

Hi:

If you want to install an internal Wi-Fi adapter, you will need to purchase a PCIe x1 Wi-Fi/Bluetooth adapter that has external antennas.

Something like this:

5400Mbps PCIe WiFi 6E Bluetooth5.2 WiFi Card, Intel WiFi 6E AX210, Tri-Band (6GHz/5GHz/2.4GHz) WiFi ...

According to the package list at the bottom right of the page, it includes the low-profile mounting bracket used in SFF PC's as well as the USB Bluetooth cable that you need to connect to the 9-Pin USB header on the motherboard.

You will only be able to connect the Bluetooth cable if your PC did not come with the optional SD card reader.

Here is a picture of the motherboard:

HP 795231-001 ProDesk 600 G2 SFF LGA 1151 DDR4 Desktop Motherboard | eBay

The USB cable plugs into the black header that is just above the SATA ports labeled SD RDR.

The cable will use the 9-pins on the left of the header, leaving two exposed pins on the right which are not necessary for the Bluetooth to work.

[Bendoom]

Oh Nice! Thanks a lot for you answer. I bought something similar but the bracket was too long. Forgot that it was not a standard one. 
I Check something like that 😊

[Paul_Tikkanen]

You're very welcome.