Will i9 11900 (f/k/kf) work normally on a motherboard with H470 chipset?

[D_ERSHOV]

There is an HP ENVY TE01-1010ur system unit. I don't know what kind of motherboard it has. It says that the model is HP 8767. The chipset is H470. I want to install more powerful processors. The is i5 10400f inside, and it’s not enough for me. The i7 11700 would have suited me, but it turned out that for some reason it would cost me more than the i9. Therefore, the question arose: will this motherboard be enough to run the i9 11900 (f/k/kf)? Bios is fresh. There seems to be support. I'm not going to overclock, I've never suffered from this. I would be grateful for a detailed answer. If yes, then why; if not, why not? Thanks in advance to everyone.

[Paul_Tikkanen]

Below is the link to the product specs for your PC:

HP ENVY Desktop TE01-1010ur PC Product Specifications | HP® Support

It has the Baker motherboard.

Below is the link to the Baker motherboard specs:

HP Desktop PCs - Motherboard Specifications, Baker | HP® Support

It appears the best processor you can install would be the Intel Core i7-10700F 

There are no BIOS updates that add support for newer processors.

Here are the release notes for all of the BIOS updates:

Version:

F.11 Rev.A

Fixed in this release: [BIOS Changes and Fixes]
The first 20H1 Soft-roll production release BIOS.
1. Updates ECFW to v58.12.
2. Forces ECFW update.
3. Adds DPTF and Non-DPTF FAN Curve select porting.
4. Fixes issue where system does not update after updating BIOS from F.02 to F.10 via HPWINGUI without FDO jumper.

[EC Changes and Fixes]
1. Updates fan table based on Lumiere2 MT fan table_V06_20200602.xlsx.

Version:

F.21 Rev.A

Fixed in this release: - Fixes issue where the Intel 9560 WLAN driver is still listed in Device Manager after setting the M.2 Card Slot 1 to disabled in F10>Security>Slot Security.
- Updates system to always report HPIC0003 to improve issue where OCC cannot install under FreeDOS SKU.

Version:

F.23 Rev.A

Fixed in this release: - Fixes issue where system could hang while playing online video and music.
[BIOS Changes and Fixes]

Version:

F.30 Rev.A

Fixed in this release: The first 20H2 soft-roll CML-S refresh CPU support released production candidate BIOS.
1. SIO1955144 - [PIN/FXN/21C1][HolmesI/GMI/CRI]There is a FAILURE.FLG about AMD Graphics UWPPair in C:\system.sav and AMD Radeon Software does not install on build 19WW2HHT6al(19042.685) with Baker+AMD RX5500 4G.
2. Set ME lock\BIOS lock to 1, ME counter to "3", limit to 0x30 for F30 , limit to 0x00 for D30.

Version:

F.31 Rev.A

Fixed in this release: [BIOS Change Item]
- Fixes issue where disabling "Runtime_SMM_Polling” instead of disabling "TB 3.0 (Turbo Boost Max 3.0)" would cause system to hang when playing video on i7/i9 processor and Hynix SSD SKU on CML-S platforms.
- Fixes issue where "keyboard Error" shows up in POST Screen after G3 or BIOS Recovery completely and restarting the UUT with i3-10100 CPU.

Version:

F.41 Rev.A

Fixed in this release: - Provides enhanced security.

Version:

F.45 Rev.A

Fixed in this release: - Provides enhanced security.

Version:

F.46 Rev.A

Fixed in this release: - Provides enhanced security.

Version:

F.47 Rev.A

Fixed in this release: - Provides enhanced security.

Version:

F.49 Rev.A

Fixed in this release: - Provides enhanced security.