-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Hardware and Upgrade Questions
- Would like to upgrade to SSD and add additional DDR3 memory....

Create an account on the HP Community to personalize your profile and ask a question
05-05-2020 10:33 AM
As for SSD, would like to know which type of SSD should I buy. Does this model’s motherboard support m2/ m.2 SVMe or should I go for the 2.5inch SATA? What are the recommended options that are compatible.
Similarly, for DDR3 memory I understand that I can upgrade upto 16 GB DDR3 on 64bit system. So which brand is recommended for an additional 8 GB memory, which I am looking to buy.
Solved! Go to Solution.
Accepted Solutions
05-05-2020 10:54 AM
Simple first:
If you can find this HP part number 698657-154 for another 8GB RAM module, it will be simple to add it to the vacant slot, as it is best to install matching pairs.
SSD:
There is no M.2 socket 3 SSD slot. You could use a 2.5" SSD, that will require you to plug it in, and then slide the drive cage over-top the SSD, taking care not to move the SSD. You will need flat washer(s) to keep the mounting screw(s) in place.
HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.
05-05-2020 10:54 AM
Simple first:
If you can find this HP part number 698657-154 for another 8GB RAM module, it will be simple to add it to the vacant slot, as it is best to install matching pairs.
SSD:
There is no M.2 socket 3 SSD slot. You could use a 2.5" SSD, that will require you to plug it in, and then slide the drive cage over-top the SSD, taking care not to move the SSD. You will need flat washer(s) to keep the mounting screw(s) in place.
HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.
05-05-2020 10:56 AM - edited 05-05-2020 10:57 AM
Hello
your pc HP Pavilion 23-q141in TouchSmart All-in-One Desktop PC Product Specifications
and the motherboard:
Crane-2G motherboard specifications.
There is only one M2 wlan connector!
So it is only possible to install a SATA SSD!
You can try the SCAN here:
Welcome to Crucial USA
I installed without problem a sata SSD on an old HP
https://www.crucial.com/ssd/mx500/CT500MX500SSD1
But you are free to try another brand.
We cannot guarantee the compatibility of a particular model.
For the memory if it is an addition you will need an identical model preferably
it is mentioned (to be checked):
Amount: 8 GB
Speed: PC3-12800 MB / s
Type: DDR3-1600
____________________________
- Dual channel memory architecture
- Two 204-pin DDR3L SODIMM sockets
- Supports up to PC3L-12800 (DDR3L-1600)
- Supports 2 GB, 4 GB, and 8 GB SODIMMs
- Supports up to 4 GB on 32-bit systems
note:
32-bit systems cannot address a full 4.0 GB of memory. - Supports up to 16 GB (unbuffered) on 64-bit systems
note:
Maximum memory shown reflects the capability of the hardware and can be limited further in the operating system.
Sometimes you have to buy new models because the one in place could be incompatible with the new one!
So test with addition, it can pass, and if not the case you will have to buy the same!
was this reply helpful , or just say thank you ? Click on the yes button
Please remember to mark the answers this can help other users
Desktop-Knowledge-Base
Windows 11 22h2 inside , user
------------------------------------------------------------------------------------------------------------