• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
HP Recommended
molokai-u
Microsoft Windows 10 (64-bit)

Hardware:  Hp Allinone  MB Molokai -u   dan91amb6d0 ver D 

 

no usb ports locked in bios.  I tried removing batt,  and power, no go.😢

I then found jumpers under cpu fan; set juper to pin 3 4, no go. 😂

 

let computer set overnight no power or batt.  no go 🤣

 

Does anyone know somthing that im doing wrong ? or have the solution ? 🤷‍♂️

 

other then that I found on ebay a motherboard for $50.00

 

Thanks

3 REPLIES 3
HP Recommended

Hi:

 

See if the motherboard specs page at the link below is of help to you.

 

https://support.hp.com/us-en/document/c05100624

 

The last section has the information to clear the CMOS, which should put the BIOS settings to their defaults.

HP Recommended

thank you for your fast reply

 

I found that link but the jupper have no affect, does not give the procedure.   I jumped pin 3 4 powered on  no luck

took batt. and power out jumped 3 4 no luck also 

jumped 1 2    fdo  no lucked 

jumped 4 5  clear password   no lock 

jumped 3 4 clear cmos  no luck

 

maybe im missing some step

 

HP Recommended

You're very welcome.

 

Yes, unfortunately there is no step by step procedure to clear the CMOS, and you did everything I would have done.

 

So if there is a step you are missing, I wouldn't know what it could possibly be.

 

Even removing the battery should have set the BIOS to its defaults.

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.