cancel
Showing results for 
Search instead for 
Did you mean: 
miaoumix75
New member
1 0 0 0
Message 1 of 1
149
Flag Post

change the power supply unit with an adapter / bad connections

HP Recommended
HP ProDesk 600 G1 MT - Core i5-4570
Microsoft Windows 10 (64-bit)

Hello,

 

I bought an adapter because I would like to install a more powerful power supply in my HP 600 G1 (to install a graphics card).

 

This 24 pin / 6 pin adapter is made for the 800 G1, so I thought it would be compatible with 600 G1, but not:

https://www.aliexpress.com/item/33012522615.html?spm=a2g0s.9042311.0.0.39be4c4dxhM7qd

 

adaptateur.jpg

 

Looking at the white plug, I saw that the cables were not in the same places as on the white plug of my 600 G1.
On my 600 G1, the cables are in holes 1,2,3,4 and on the adapter they are in holes 2,3,4,5 (see photo below).

I also took a picture of the 24 pin plug so you can see where the blue, brown, yellow and gray cables are going from.

 

schema-adaptateur.jpg


Does anyone know how in what order I could put my adapter cables back into the holes in the white plug?


Thanks in advance 🙂

 

Raphael

Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation