cancel
Showing results for 
Search instead for 
Did you mean: 
manosmc8
Level 1
5 4 1 1
Message 1 of 6
340
Flag Post

Solved!

hp 6000 pro mt gt 1030

HP Recommended
6000 pro mt
Microsoft Windows 7 (32-bit)

hi 

 

i installed a gigabyte gt 1030 in a hp 6000 pro mt but never got it to appear in device manager

th pc starts up the gt 1030 is working (the fan) but video only from the intel gpu

running the latest bios for motherboard (2015)

i know about non uefi bios but i have seen videos with 6000 sff ant gt 1050 working

 

is there any advice 

thank you

 

1 ACCEPTED SOLUTION

Accepted Solutions
manosmc8
Author
Level 1
5 4 1 1
Message 5 of 6
Flag Post
HP Recommended

Thanks for the answers . I solved the problem. The final step have video output from the gt 1030 was to go to bios at pci devives and set the internal intel gpu from irq5 to disable. The pc closed and when i opened it again i iad signal from 1030 hdmi. So 1000 series ( at least some) works with older bios.

View solution in original post

0 Kudos
5 REPLIES 5
old_geekster
Level 16
Level 16
24,993 24,644 2,875 10,656
Message 2 of 6
Flag Post
HP Recommended

@manosmc8 , welcome to the forum.

 

I suggest that you contact the video card manufacturer's Tech Support for help with your problem.  Each manufacturer has their own specifications for the GT 1030.  It is difficult to know if the GT 1050 that you mentioned had a switch that allowed it to work with a standard/Legacy BIOS.  I know this has been done.  The GT 1030, as you stated, should have UEFI in the motherboard, however.






I am not an HP Employee!!

Intelligence is God given. Wisdom is the sum of our mistakes!!
0 Kudos
manosmc8
Author
Level 1
5 4 1 1
Message 3 of 6
Flag Post
HP Recommended

Do you know hot to switch to the gt instead of the em embedded intell ?

Also is there an option for secure boot disable? Or this is option is  for another motherboard ?

Thank you

0 Kudos
old_geekster
Level 16
Level 16
24,993 24,644 2,875 10,656
Message 4 of 6
Flag Post
HP Recommended

@manosmc8,

 


@manosmc8 wrote:

Do you know hot to switch to the gt instead of the em embedded intell ?

Also is there an option for secure boot disable? Or this is option is  for another motherboard ?

Thank you


The switch is actually on the exterior of the card and mechanical; not software related.  At least, this is what I was lead to believe.  I haven't seen a card with the switch.

 

Your BIOS will not have Secure Boot.  It is only available with UEFI and Win 8.

 

 



 






I am not an HP Employee!!

Intelligence is God given. Wisdom is the sum of our mistakes!!
0 Kudos
manosmc8
Author
Level 1
5 4 1 1
Message 5 of 6
Flag Post
HP Recommended

Thanks for the answers . I solved the problem. The final step have video output from the gt 1030 was to go to bios at pci devives and set the internal intel gpu from irq5 to disable. The pc closed and when i opened it again i iad signal from 1030 hdmi. So 1000 series ( at least some) works with older bios.

View solution in original post

0 Kudos
old_geekster
Level 16
Level 16
24,993 24,644 2,875 10,656
Message 6 of 6
Flag Post
HP Recommended

@manosmc8, thank you for letting us know that you solved your problem.  Please mark your response as the "Solution",  I thought that the Integrated video was automatically disabled when a discrete card was installed or I would have mentioned it.






I am not an HP Employee!!

Intelligence is God given. Wisdom is the sum of our mistakes!!
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation