is my KBC version 05.26 8061 motherboard outdated cuz i'm looking to upgrade my GPU but idk if i can

[TheecompPleb]

hp prodesk 400g3 mt

x64 based

intel core i5-6500 @3.20ghz , 3192mhz 4cores, 4 logical processor 

bios hp no3 ver 02.04 2016

board  version kbc ver 05.26

p.s I had the motherboard changed cuz of an issue some years back

[NonSequitur777]

@TheecompPleb,

Welcome to our HP Community forum!

Your HP ProDesk 400 G3 MT is most certainly upgradeable, as you can see here amongst fellow HP ProDesk 400 G3 MT Users: https://www.userbenchmark.com/System/HP-ProDesk-400-G3-MT/25963.

For example:

1.) You could upgrade your processor up to an i7-6700K.

2.) You can upgrade your RAM up to 2 x16GB of DDR4 PC4-19200, 2400 MHz, Non-ECC, UDIMM, 288-pin RAM sticks, which will down-throttle aka 'bridge' to run at 2133 MHz.

3.) You can upgrade your 24-pin ATX-based power supply as @old_geekster pointed out here, to power any graphics card you can afford. (Watch power supply and GPU dimensions for fit inside your case.)

Kind Regards,

NonSequitur777