need instructions to add additional HDD's And a second ssd for omen 45L GT22-2090 please

[L14N]

need instructions to add additional HDD's And a second ssd for omen 45L GT22-2090 please

[Max3Aj]

@L14N, Welcome to HP Support Community. 

Thank you for posting your query, I will be glad to help you. 
Here’s a step-by-step guide to add additional HDDs and a second SSD to your OMEN 45L GT22-2090 gaming desktop:

🔧 Tools You’ll Need

• Phillips-head screwdriver
• Anti-static wrist strap (recommended)
• SATA data cable (for HDD/2.5" SSD if needed)
• Mounting screws or brackets (if not already included with your case)
• Optional: M.2 standoff (usually pre-installed)

🧰 Internal Overview of OMEN 45L GT22-2090

• Motherboard: Usually supports multiple SATA and M.2 drives.
• Storage Bay Options:
  • 1x M.2 NVMe SSD slot (used for the pre-installed SSD)
  • 1x additional M.2 slot (varies by model; check your board—most Z690 versions do have a second)
  • 2x 3.5" HDD/2.5" SSD bays in the front-bottom shroud

🥇 Adding a Second M.2 SSD

1. Shut Down & Unplug the PC.
2. Remove Side Panel:
   • Loosen the thumbscrew on the left panel.
   • Slide the panel off carefully.
3. Locate the M.2 Slot:
   • Check near the GPU or above the chipset heatsink.
   • Use the standoff and screw if not already pre-installed.
4. Install the M.2 SSD:
   • Slide the SSD into the slot at a 30° angle.
   • Press it down gently and secure it with the screw.
5. Reassemble and Boot.
   • ✅ Your BIOS should detect the SSD automatically. Use Disk Management in Windows to format and initialize.

🥈 Adding 3.5” or 2.5” SATA HDD/SSD

1. Locate the Drive Cage:
   • Bottom-front section of the case.
   • May be hidden behind the front shroud or PSU cover.
2. Mount the Drive:
   • Slide the HDD or SSD into a tray or mounting slot.
   • Secure with screws on both sides.
3. Connect SATA Data & Power Cables:
   • Plug SATA power from PSU.
   • Connect SATA data cable to the motherboard (ports are usually on the right edge or bottom-right).
4. Secure and Close the Panel.

🛠️ Tip

If you’re out of SATA ports or power cables, you may need:

• A SATA splitter
• An additional SATA cable (often not included with the PC)

💡 Final Setup in Windows

1. Boot into Windows.
2. Open Disk Management:
   • Press Win + X → Select Disk Management.
3. Initialize new drives (if needed).
4. Create partitions and assign a drive letter.

• Ensure BIOS is updated before installing newer-generation NVMe SSDs for best compatibility.

We suggest you please visit the nearest HP authorized service center, our service team will assist you with this. Kindly follow this link to locate the nearest HP service center: HP® Service Center Locator - United States | HP® Support
(Select the country from the dropdown menu and enter the city name or pincode) 
 

I hope this helps. 

Take care and have a good day. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping! 

Max3Aj

HP Support