proprietary HDD power cable

[KV_A1]

I need the power cable that connects to this circled 4 pin connector on my board 

I want to add a hard drive.  there is a clear sata port as shown in the picture, and the 4 pin connector circled says "HDD PWR" on the board.  But I have never seen such a small molex type connector.

I have been searching around and asking in other tech forums and have not found what this part is called.

[KV_A1]

looks like the picture link didn't post, here is the photo

I need to know the part compatible to the above circled connector labeled "HDD PWR"  It appears to be some small form of molex

[BeemerBiker · Accepted solution]

Going to take a guess based on 

1. you have monkd motherboard and your picture shows the two parts very clearly but the cable number is not listed under 24-df0030 anywhere

2. Looking at a lot of HDD sata/power cables I found DD0N91HD001 

3. That cable is designed for HP 24-G014 AIO which is "Hawaii-u" motherboard.

Here is a picture (from above url) of the sata/power for the Hawaii-U and it look like your monkd motherboard connectors

Looks identical

I recommend you get a USB3 external drive instead.

If you do get a  hard drive make sure it is SDD and has no metal surface that could short out when touching motherboard parts.  I suspect your AIO has no place to mount an HDD but I might be mistaken

[KV_A1]

That looks as though it should work, and $9 isn't much if it doesn't

big thanks for discovering this.

regarding external drive advice.  I already have a 2.5" terabyte drive I want to make use of.

My experience with USB external drives is they can have annoying connectivity issues and I'd like to keep the last USB 3.0 slot free.