ram overclock in bios

[cheesy_big_mac]

I recently purchased 2x16 gb Corsair legacy LPX ram cards and on the packaging it is rated to run at 3000 MHz, however my system is currently running at 2133 MHz.  I know the cards can be overclocked to the factory tested speeds but I cannot find the right options in my BIOS or UEFI settings

I have an AMD Ryzen 5 with Raedon Vega GPU in my system currently (from factory)   I do not know if this motherboard allows me to access those overclocking options and if so would love to know how

thanks!

[banhien]

@cheesy_big_mac 

The specs of your machine is

            https://support.hp.com/ca-en/document/c06355667

It has Intel® Core™ i7-9700 (3 GHz base frequency, up to 4.7 GHz with Intel® Turbo Boost Technology, 12 MB cache, 8 cores) CPU From my memory, HP only allows K CPU machines to be able to overclock.

Regards.

[cheesy_big_mac]

No, mine has the AMD ryzen 5 processor, not intel.

[Prométhée · Accepted solution]

hi

in this case check the model you indicated
with this reference we find several possibilities
except none is indicated with an AMD motherboard

HP Pavilion 590-p0072 Product Specifications

HP Pavilion 590-p0072nf Product Specifications

HP Pavilion 590-p0072ng Product Specifications

 HP Pavilion 590-p0072ur Product Specifications

if not, in the same series you can have this motherboard:

 motherboard specifications, Sunflower

• Dual channel (2 DIMMs per channel) memory architecture
• Two DDR4 UDIMM (288-pin) sockets
• Supports PC4-19200 (DRR4-2400)
• Supports 4 GB and 8 GB DDR4 UDIMMs
• Supports up to 4 GB on 32-bit systems

  note:

  32-bit systems cannot address a full 4.0 GB of memory.

• Supports up to 32 GB (unbuffered) on 64-bit computers

  note:

  Maximum memory shown reflects the capability of the hardware and can be limited further in the operating system.

in this case nothing to do!