ram upgrade

[elroylee]

bought a new HP W/a AMD Ryzen 3 3200, need to upgrade ram what voltage and kind thinking 3200mz

[banhien]

@elroylee 

Your machine is an HP Desktop - M01-F0033w. Its specs

        https://support.hp.com/hk-en/document/c06691431

Memory information:

• Dual channel (1 DIMM per channel) memory architecture
• Two DDR4 UDIMM (288-pin) sockets
• Supports PC4-25600 (DDR4-3200)
• Supports 8 GB and 16 GB DDR4 UDIMMs
• Supports up to 4 GB on 32-bit systems

  note:

  32-bit systems cannot address a full 4.0 GB of memory.

• Supports up to 32 GB (unbuffered) on 64-bit computers

It has  8 GB DDR4-2666 SDRAM (1 x 8 GB) now.You can upgrade to

• 16GB : add same existing to slot 2 or    https://www.crucial.com/memory/ddr4/ct8g4dfra32a/ct19271334
• 32GB (max) : install 16GB to each slot using the following compatible RAM (will run at 2666MHz)

                               https://www.crucial.com/memory/ddr4/ct2k16g4dfd8266/ct19271253

                      or     https://www.crucial.com/memory/ddr4/ct2k16g4dfra32a/ct19271255

                      or     https://www.crucial.com/memory/ddr4/ct2k16g4dfd832a/ct19271326

Regards.

[elroylee]

thank you, BH for your reply going with Crucial 8GB DDR4-3200 UDIMM  will it run with the stock ram already installed or should I get a matching pair of 8gb and throw out stock ram?

[banhien · Accepted solution]

@elroylee 

I did say

• 16GB : add same existing to slot 2 or    https://www.crucial.com/memory/ddr4/ct8g4dfra32a/ct19271334

 You can use Crucial RAM if you could not get same existing 8GB. Machine will use 8GB existing RAM and new 8GB RAM to have 16GB.

Regards.