Solved: replace 180 watts PSU - HP Support Community

LCP47 · ‎09-07-2020

I want to replace my PSU for a 750W Evga 100-N1-0750-L1 750w N1 Power Supply is this the right Power supply for my Pavilion Power desktop 580-027c ? it is the same dimentions thank`s

wb2001 · ‎10-31-2020

@LCP47

You posted on 9/6 the same inquiry. Now 🤔 🙄

https://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/upgrade/m-p/7765922

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.

View solution in original post

wb2001 · ‎09-07-2020

@LCP47,

Your asking again. Surmise you did not like my reply. But if you want a 750W, go for it.

You really only need a 500W PSU. Pulling an RTX 2060 (160W) card into your HP 580-027c does not require a 750W PSU. The issue will be length of the card. I would suggest you make a heavy gauge cardboard template of 4.3" x 10.5" and drop that into place. Trim off 1/2" at a time until you attain the length that will fit. An RTX 2060 can run from 8 to 10.5 + inches.

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.

LCP47 · ‎10-31-2020

Wb 2001 you must be mistaking I have never give a dislike to anyone's Comment I am very sure of that because to me No comment is deserving of Dislike I am pro free speech. and if I did it was by mistake being that my Logitech keybord Acts out here and then.

wb2001 · ‎10-31-2020

@LCP47

You posted on 9/6 the same inquiry. Now 🤔 🙄

https://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/upgrade/m-p/7765922

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.

LCP47 · ‎10-31-2020

the Dimentions are 9".5 before hit the HHD so I found the NSI G-force is 8.5" it will fit I have an MSI G-Force GTX 1050 TI 4 Gb Small Adapter that I was using on my Hp Compaq Pro it works good but this GPU uses 380w or higher so I have the choice to get a 500w and used the GTX 1050 ti or used the RTX 2060 6gb.? I need a PSU at least 500w which one will you recomend?

replace 180 watts PSU

Create an account on the HP Community to personalize your profile and ask a question