upgrading power supply to 700w

[tdx0]

I looked at power supplies one with cables already mounted unsure about what will fit in the case or voltage other than around 12+ volts. Is there a 700w available that would fit, right voltage and cables already attached. Amazon has an EVA 700B1,80+ Bronze 100-B1-0700 K1. product dim. 5.5x5.9x3.4"  Item dim. 5.51x5.91x3.35". I was upgrading just to be certain no issues would come up after 2 other upgrades.

[old_geekster · Accepted solution]

@tdx0, welcome to the forum.

The EVGA PSU should work fine in your computer.  I suggest measuring the existing PSU to assure that the new one will fit into the space provided.  The computer will only use the amount of power from the PSU that is necessary to run it properly.  The remainder of the power will be there for peak usage.

Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.

[tdx0]

Thanks I will order one today. I saw one that had a better warranty has only one preinstalled cable the 24 pin for the mother board. It comes with 8-10 other cables you plug in. I will double check those dimentions. Have a good Christmas.