what's the spec of the pillar to install wifi card and nvme drive?

[mcarthorlee]

hi community,

i've got a HP ProDesk 600 G3 Microtower and i wanna install wifi card and nvme drive.

according to the youtube HP official support video:

https://www.youtube.com/watch?v=mv1I7lf6MX

Removing & Replacing Parts | HP ProDesk 600 G3 Microtower PC | HP Computer Service | @HPSupport

at the time of 35:04, we can see a black pillar to install the wifi card on the chassis. i believe that nvme drive also need one to be installed on the chassis.

to be quick, attach a screenshot of that time of the video:

but my pc does not ship with such pillar. 

so my question is: for the pillar, what's the height, what's the dimension of the bottom screw bolt to connect to the chassis, what's the dimension of the top screw hole to install the card, what's the specs of what-i-missed.

many thanks for watching this thread and giving answers.

[NonSequitur777]

@mcarthorlee,

Welcome to our HP User Forum!

What you need are some Nylon M3 Hex male/female spacers, such as found in this inexpensive kit: https://www.amazon.com/300pcs-Female-Standoff-Assortment-Plastic/dp/B08JPQX9ZM/ref=sr_1_16?keywords=....

Hope this was helpful.

Kind Regards,

NonSequitur777

[mcarthorlee]

@NonSequitur777 thanks for your kind reply. i'm in china and i have chinese amazon (taobao.com)😁. i found many sellers who sell such standoffs, but they don't sell them with mixed sizes. the products are like: m3*5+3 (50 pcs) for $xx, m3*6+3 (50 pcs) for $xx. so i'd like to know the height of normal HP standoffs so that i can buy the right size.

@Wilack552 thanks for your kind reply. i'll try to contact local HP support for the information.

i'll leave message later when i find the right standoff and screw.