wondering how to set the HP bios to restart the PC after a power outage ?

[videonet]

Hello wondering how I can set the power options in the bios to restart the HP  PC after a power outage ? I see the schedule  I check all the days I save and exit but the PC will not power back up. 

[itsmyname]

@videonet -- enter BIOS Setup. Look in the "power" settings. On most computers, there is an option to power-on the computer when the electrical power is restored.  This is meant for "servers" that you want to restart automatically, rather than getting a late-night telephone-call to come in and restart the computer.

[Prométhée]

hi

check this

HP EliteDesk 800 G3 SFF Business PC - Maintenance and Service Guide

Computer Setup—Advanced
NOTE: Support for speciƭc Computer Setup options may vary depending on the hardware conƭguration.

Boot Options Select the devices that the computer can boot from, as well as other options, including:
● Startup Menu Delay(sec). Enabling this feature will add a user-speciƭed delay to the POST process.
One purpose for the delay is to provide additional time to activate hotkeys such as Esc for the
Startup Menu or F10 for Computer Setup.
● Fast Boot. Default is enabled.
● CD-ROM Boot. Default is enabled.
● USB Storage Boot. Default is enabled.
● Network (PXE) Boot. Default is enabled.
● After Power Loss. Default is Power 2ƫ.
■ Power oƫ—causes the computer to remain powered oƫ when power is restored.
■ Power on—causes the computer to power on automatically as soon as power is restored.
■ Previous state—causes the computer to power on automatically as soon as power is restored,
if it was on when power was lost.
Computer Setup (F10) Utilities 73