-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Operating Systems and Recovery
- Bios black screen & high fan speed after changing the splash...

Create an account on the HP Community to personalize your profile and ask a question
07-11-2023 03:52 AM
I flashed my custom logo via flashi.exe in DOS mode, after it finished, I restarted my computer and the custom splash screen didn't pop up and the fan speed is high.
I tried to power cycle the desktop, Still black screen and high fan speed.
Pulled out the CMOS battery then save changes, still the same even I hit the f10 while on the mb thingy just switches the name in setup and after that save changes, rebooted, and black screen and high fan speed.
Pressing Win+B or Win+V doesn't work, still the same thing.
Any help is appreciated.
07-11-2023 04:54 PM - edited 07-11-2023 04:56 PM
BIOS got corrupted. It can happen. Unusual for HP and most other OEMs is that your motherboard has a boot block protector
http://h10032.www1.hp.com/ctg/Manual/c01362760.pdf
Please read the instructions on page 3 under "Boot Block Emergency Recovery Mode"
Download the bios install and extract the 7F2_0160.bin file and put in in a USB or burn to CD and try the boot block recover procedure
https://ftp.hp.com/pub/softpaq/sp73501-74000/sp73863.exe
note that the cd or usb needs the BIN file, not the .exe
Thank you for using HP products and posting to the community.
I am a community volunteer and do not work for HP. If you find
this post useful click the Yes button. If I helped solve your
problem please mark this as a solution so others can find it