Bios for elite 7100

[Monder1]

I need bios file 5.19. I could not get it from hp homepage. Could you send it to my mail mehmetonder197999@g

[Paul_Tikkanen]

Hi:

Here is the v5.19 BIOS file...

5.19    Apr 22, 2011

https://ftp.hp.com/pub/softpaq/sp52501-53000/sp52755.exe

It is listed under the Previous Versions section for the BIOS update files, along with v5.15.

[Monder1]

Thanks for your help. The bios was updated but i have a new problem. In my computer there are 3gb rams as 1+1+1. Now i try to add a 4gb singke part ram. Its frequncy is the same with others. But when I add this 4 gb ram, the computer does not work. I tried only that 4 gb ram without others. But again the system didn't start.  I tried all slots of the mainboard. In the bios menu, i can ses 4 gb ram. But system not work. What sholud I do? Is the format required? Or another solution?

[Paul_Tikkanen]

You're very welcome.

Did you install a low density, non-ECC, Unbuffered memory module?

That model is hard to find the right memory for when you want to install 4 GB chips.

My guess is you have an incompatible memory module.

These are the brand and model I used in my HP 8000 Elite CMT.   They work fine.

https://www.newegg.com/patriot-4gb-240-pin-ddr3-sdram/p/N82E16820220480?Item=N82E16820220480

[Monder1]

My working 1+1+1 memories are samsung 1333 mhz. 4gb memory is kingston 1333 mhz and although I can see that in bios, the system don't start. I thought thah my problem is solved when i upgraded the bios but not. 

[Paul_Tikkanen]

There is a newer BIOS update than the one you upgraded to.

v6.18    Apr 22, 2011

https://support.hp.com/us-en/drivers/selfservice/hp-elite-7100-microtower-pc/4132189

I don't think it will matter though.

My money is on an incompatible memory chip.