cancel
Showing results for 
Search instead for 
Did you mean: 
VU1
New member
1 0 0 0
Message 1 of 2
2,703
Flag Post

Blank screen and beeping' blinking power light

HP Recommended
Y4F92PA#ABJ
Microsoft Windows 8.1 (64-bit)

My Windows 10 was asking for some update but unfortunately it was not done, then it went on some troubleshooting options once or twice the laptop turned on for some time but after that it showed blank screen. Even the power button is not showing constant on but it shows blinking. Hard drive voice and system booting sound is coming

1 REPLY 1
Kumar0307
HP Support Agent
HP Support Agent
20,419 20,421 1,491 1,739
Message 2 of 2
Flag Post
HP Recommended

Hi @VU1

Welcome to the HP Support Community. I'd be happy to assist you. Let us try these steps to resolve this issue:

 

Power reset the PC

1) Shutdown the computer. 
2) Unplug all the Adapter and peripherals connected. 
3) Press and hold down the power button for 15 to 20 seconds. 
4) Plug-in the Adapter. 
5) Try to turn on the computer. 


Let us run a test on the hardware components of the PC

  1. Hold the power button for at least five seconds to turn off the computer.
  2. Turn on the computer and immediately press Esc repeatedly, about once every second. When the menu appears, press the F2 key.
  3. Perform System Test > Extensive test. Share the result on your next post.

Hope this helps! Keep me posted. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day! 

KUMAR0307
I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation