cancel
Showing results for 
Search instead for 
Did you mean: 
IC1223
New member
2 1 0 0
Message 1 of 3
5,417
Flag Post

Error code help

HP Recommended
HP 23-p111 All in One Desktop

Product  name: HP All in one desktop

Model: 23-p111

I ran a diagnostic quick test and came up with:

Hard Drive Short DST Check: Failed

 

Failure ID: 90D9XF-7KEA3A-MFPNL1-60QJO3

Product ID: J4X02AA#ABA

Hard Drive 1 

Thanks 

2 REPLIES 2
Lil_Boy_Blue
Level 12
7,692 7,654 332 704
Message 2 of 3
Flag Post
HP Recommended

Hi

Replace the HDD and Re-Install.

 

If in doubt please ask.

 

~~~~~~~~~~~~~~~~~~~~~~

W8 Repair.pngRecovery Reinstall.png

From 2016 onwards there is a possible recovery option via the cloud...
HP Consumer PCs - Using the HP Cloud Recovery Tool (Windows 7 & 10)
https://support.hp.com/us-en/document/c06162205
OR
This First part only works when a valid Recovery Partition is enabled.
If it displays an error message then move onto the Second part,
OR if you have data you wish to try and save using the XCOPY command.
Then create your own Repair/Recovery/Rebuild/Re-install media or buy a set from HP.

Turn off the computer.
Disconnect all connected devices and cables, Media Drives, USB drives, printers, & faxes.
Remove media from internal drives, and remove any recently added internal hardware.
Do not disconnect the monitor, keyboard, mouse, or power cord.
WARNING - ONE WAY ONLY, WIPES ALL DATA - NON-RECOVERABLE
Turn on the computer and repeatedly press the F11 key, about once every second,
until the Choose an option screen is displayed, and then continue.

On the Choose an Option screen, click Troubleshoot, and work your way through the screens.

Second Part:-
This may require another PC. Find and Download your .iso from…
https://www.microsoft.com/en-us/software-download/windows10
Expand/Extract/Burn the iso Image onto a DVD/USB as needed.
Microsoft’s Creator Tool will make the required DVD or USB.

Even though it has NO actual HP software/drivers included, you may be able to
XCOPY the C:\Users\* area onto a ‘large’ USB stick, via the Command Prompt.

You’ll need to try various drive letters; D:..-..Z: until it’s matched - could be G; mine’s S:

C:\>XCOPY C:\Users\* S:\ /e /i /h (then files like those 3 listed below get copied over)

C:\Users\desktop.ini
C:\Users\All Users\agent.1509128044.bdinstall.bin
C:\Users\All Users\HP Deskjet 2540 series\Help\flash\zoom.swf

Then you can try System Recovery Options / Advanced Options shown in the screenshots.
NB: - W10 Begin with the Automatic Repair, then Startup Settings etc.

From either the C:\ or the X:\ prompt try the following


http://www.thewindowsclub.com/install-windows-10-from-usb

0 Kudos
IC1223
Author
New member
2 1 0 0
Message 3 of 3
Flag Post
HP Recommended

Ok installed a new hard drive and this error pops up. 

image.jpg

image.jpg

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation