cancel
Showing results for 
Search instead for 
Did you mean: 
Raj132
Level 1
3 2 1 0
Message 1 of 6
348
Flag Post

Solved!

Error during factory reset

HP Recommended
HP 27-a127c
Microsoft Windows 10 (64-bit)

I had a hard drive error. I replaced the hard drive with a new drive of the same model. Using previously created system recovery discs, upon doing a factory reset type of recovery, I get the exact same error as listed in https://h30434.www3.hp.com/t5/Desktop-Operating-Systems-and-Recovery/Attempted-factory-reset-restora...

Error code is as follows:

 

[16:41:57.67] **************************************************
[16:41:57.68] [C:\SYSTEM.SAV\ExitProc\ErrorChk\ChkError.cmd] has started...
[16:41:57.68] --------------------------------------------------
[16:41:57.70] Check SW Error...
[16:41:57.70] --------------------------------------------------
[16:41:57.70]
[16:41:57.72] Create ["C:\system.sav\ChkError.cmd.FAILURE.flg"] file...
[16:41:57.72]
[16:41:57.73] Logfile [C:\system.sav\Logs\CheckLog\ChkErr_PASS2_BBVClean.log]...
[16:41:57.73]
[16:41:57.73] Check 2nd parameter [BBVClean]
[16:41:57.75]
[16:41:57.75] Error Checking items : [MEMDUMP,APPSLOG,REGDEV,TIMEOUT,WINSAT,FAILUREFLG]
[16:41:57.76] --------------------------------------------------
[16:41:57.76] Checking : Memory Dump
[16:41:57.78] Could not find memory dump...
[16:41:57.78]
[16:41:57.79] [DumpFile]
[16:41:57.79] Result=PASSED
[16:41:57.81] --------------------------------------------------
[16:41:57.81] Checking : Apps' log
[16:41:57.81]
[16:41:59.22] [AppsLog]
[16:41:59.23] Result=PASSED
[16:41:59.25] --------------------------------------------------
[16:41:59.28] Checking : Yellow-Bang
[16:41:59.29]
[16:41:59.33] Run [PINChkT.exe /dev /s]
[16:42:00.44]
[16:42:00.45] Append [REGDEVT_PASS2_BBVClean.LOG] to [C:\system.sav\Logs\CheckLog\ChkErr_PASS2_BBVClean.log]...
[RegistryDevicesCheck]
Result=FAILED

FAILED DEVICE #0:
Description : Unknown USB Device (Device Descriptor Request Failed)
PNPDeviceID : USB\VID_0000&PID_0002\5&1007586E&0&1
Code : [43]

[16:42:00.48]
[16:42:00.50] Run [FIND.exe /I 'Result=FAILED' C:\SYSTEM.SAV\Logs\PINPROC\REGDEVT_PASS2_BBVClean.LOG]
[16:42:00.53] [PASS2_BBVClean][PIN_ERROR_MSG][ChkError.cmd] There was some FAILED device. Please check the file C:\SYSTEM.SAV\Logs\PINPROC\REGDEVT_PASS2_BBVClean.LOG.
[16:42:00.55] There was some FAILED device...
[16:42:00.56] or, there was not target file...
[16:42:00.58]
[16:42:00.61] --------------------------------------------------

 

does anyone know how this can be resolved?

5 REPLIES 5
WAWood
Level 16
Level 16
30,573 30,480 2,785 6,733
Message 2 of 6
Flag Post
HP Recommended

@Raj132 

The reset failed when the process was checking your devices.  If you have a device for which the proper driver has not been loaded, you will see an indication of that in Device Manager.  That is what that section of the log indicates -- one or more such devices.

 

You need to check Device Manager on your own to see what device this is and if you can either disconnect it or upload the drivers.

***If my post helped, click the thumbs-up symbol to say thanks***

***Please mark Accept As Solution if my post solved your problem***

I am a volunteer and I do not work for, nor represent, HP
0 Kudos
Raj132
Author
Level 1
3 2 1 0
Message 3 of 6
Flag Post
HP Recommended

Thank you so much for your response.  There are no devices connected other than the keyboard and the mouse.  I am doing a factory reset using system recovery discs on the pc with a new empty hard drive. So I don’t have a way of accessing Device Manager until the reset completes successfully.

0 Kudos
WAWood
Level 16
Level 16
30,573 30,480 2,785 6,733
Message 4 of 6
Flag Post
HP Recommended

@Raj132 

Sorry, then you're stuck as you won't be able to clear this until you can get back into Windows.

***If my post helped, click the thumbs-up symbol to say thanks***

***Please mark Accept As Solution if my post solved your problem***

I am a volunteer and I do not work for, nor represent, HP
0 Kudos
itsmyname
Level 4
115 112 3 9
Message 5 of 6
Flag Post
HP Recommended

Description : Unknown USB Device (Device Descriptor Request Failed)
> PNPDeviceID : USB\VID_0000&PID_0002\5&1007586E&0&1

 

The first message references some USB device.

Oddly, the second message references some "video" device.

 

Can you try a different USB keyboard, or a different USB mouse, or a different monitor (one without its own USB ports) ?

 

 

 

0 Kudos
Raj132
Author
Level 1
3 2 1 0
Message 6 of 6
Flag Post
HP Recommended

Reinstalling the OS from a USB Windows 10 installation media resolved the issue.  The media was downloaded from Microsoft.  The BIOS and/or the Microsoft account has the product key that is associated with the PC and the new install uses the same key - which is great.

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation