09-16-2019 08:46 PM
Last night, I had an update to BIOS F.23. Since the update, my fans have been running full speed at all times. I have tried going into BIOS setup to configure my fan speed but the option isn't there. 3rd party software has been downloaded, SpeedFan, and will not display the fans. What can I do to fix this problem?
09-19-2019 02:37 PM
@ASmullen Welcome to HP Community!
Since the issue begin after you updated the BIOS, its most likely not installed properly or corrupted and caused the issue, I suggest you recover the last known good version of the BIOS and here's how you do it:
Turn off the computer, and then connect the power cord.
Press and hold the Windows key and the B key at the same time, and then press and hold the Power button for 2 to 3 seconds.
FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE
(By the end of this article all the issues should be resolved)
Keep us posted,
If you would like to thank us for our efforts to help you,
Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post,
Have a great day!
I am an HP Employee