cancel
Showing results for 
Search instead for 
Did you mean: 
Larry_p
New member
2 1 0 0
Message 1 of 4
631
Flag Post

HP Recovery Software fails during restore

HP Recommended
HP Pavilion Desktop 570-p064
Microsoft Windows 10 (64-bit)

I am trying to restore the PC to factory due to ransom ware by using the HP Recovery Software purchased from HP on a USB drive. The recovery fails about an hour into the restore. I I'm not sure what error log to include so I'm starting with the   D:\HP_SSRD_LOG.zip\system.sav\Logs\PINPROC\PASS2_PROC log.

 

[20:03:15.13][BlockProcess4PASS2.cmd] **************************************************
[20:03:15.13][BlockProcess4PASS2.cmd] [C:\SYSTEM.SAV\ExitProc\BlockProcess4PASS2.cmd] has started...
[20:03:15.14][BlockProcess4PASS2.cmd] --------------------------------------------------
[20:03:15.14][BlockProcess4PASS2.cmd]
[20:03:15.14][BlockProcess4PASS2.cmd] Check if create GM2PP.flg for SWDL
[20:03:15.14][BlockProcess4PASS2.cmd]
[20:03:15.14][BlockProcess4PASS2.cmd] FIND /I FACTORY_TYPE=SWDL C:\system.sav\Flags\PINCTRLTwk.pf
[20:03:15.16][BlockProcess4PASS2.cmd] Return Code = [1]
[20:03:15.16][BlockProcess4PASS2.cmd] FIND /I GM_SUPPORT_TYPE=MLGM+HWD2 C:\system.sav\Flags\PINCTRLTwk.pf
[20:03:15.17][BlockProcess4PASS2.cmd] Return Code = [1]
[20:03:15.17][BlockProcess4PASS2.cmd]
[20:03:15.17][BlockProcess4PASS2.cmd] Remove KeepLocalWSDV.flg
[20:03:15.17][BlockProcess4PASS2.cmd]
[20:03:15.17][BlockProcess4PASS2.cmd] Found C:\system.sav\util\SSRD.flg and skip checking MLGM+HWD2 process for recovery process
[20:03:15.19][BlockProcess4PASS2.cmd] CSCRIPT.exe /nologo C:\System.sav\ExitProc\WriteIni.vbs cNBImageInfo GM_SOURCE SSRM C:\system.sav\Logs\MYSYSTEM.ini
[20:03:15.21][BlockProcess4PASS2.cmd] --------------------------------------------------
[20:03:15.21][BlockProcess4PASS2.cmd] [BlockProcess4PASS2.cmd] has completed...
[20:03:15.21][BlockProcess4PASS2.cmd] **************************************************
[20:03:22.69] ---------------------------------------------------------------------
[20:03:22.69] FixUps.cmd...
[20:03:23.96][FU_FixUP.cmd] **************************************************
[20:03:23.96][FU_FixUP.cmd] [C:\SYSTEM.SAV\FactoryUpdate\FU_FixUP.cmd] has started...
[20:03:23.97][FU_FixUP.cmd] --------------------------------------------------
[20:03:23.97][FU_FixUP.cmd]
[20:03:23.97][FU_FixUP.cmd] Create ["C:\system.sav\FU_FixUP.cmd.FAILURE.flg"]...
[20:03:23.97][FU_FixUP.cmd]
[20:03:23.97][FU_FixUP.cmd] Looking for *.cmd in [C:\system.sav\FactoryUpdate\FixUp] folder...
[20:03:23.97][FU_FixUP.cmd] --------------------------------------------------
[20:03:23.99][FU_FixUP.cmd]
[20:03:23.99][FU_FixUP.cmd] Start: [C:\system.sav\FactoryUpdate\FixUp\CleanSW.cmd]
[20:03:24.01][CleanSW.cmd] **************************************************
[20:03:24.01][CleanSW.cmd] [C:\SYSTEM.SAV\FactoryUpdate\FixUp\CleanSW.cmd] has started...
[20:03:24.02][CleanSW.cmd] --------------------------------------------------
[20:03:24.02][CleanSW.cmd] Create ["C:\system.sav\CleanSW.cmd.FAILURE.flg"]...
[20:03:24.02][CleanSW.cmd] --------------------------------------------------
[20:03:24.02][CleanSW.cmd] --------------------------------------------------
[20:03:24.02][CleanSW.cmd] DIR C:\
[20:03:24.02][CleanSW.cmd] --------------------------------------------------
[20:03:24.04][CleanSW.cmd] --------------------------------------------------
[20:03:24.04][CleanSW.cmd] DIR C:\SW if exists
[20:03:24.04][CleanSW.cmd] --------------------------------------------------
[20:03:24.04][CleanSW.cmd] --------------------------------------------------
[20:03:24.04][CleanSW.cmd] cleaned C:\SW folder properly...
[20:03:24.04][CleanSW.cmd] delete ["C:\system.sav\CleanSW.cmd.FAILURE.flg"]
[20:03:24.06][CleanSW.cmd] --------------------------------------------------
[20:03:24.06][CleanSW.cmd] --------------------------------------------------
[20:03:24.06][CleanSW.cmd] [CleanSW.cmd] has completed...
[20:03:24.06][CleanSW.cmd] **************************************************
[20:03:24.07][FU_FixUP.cmd] Finish: [C:\system.sav\FactoryUpdate\FixUp\CleanSW.cmd]
[20:03:24.07][FU_FixUP.cmd]
[20:03:24.07][FU_FixUP.cmd] Start: [C:\system.sav\FactoryUpdate\FixUp\FUNAME.CMD]
[20:03:24.14][FU_FixUP.cmd] Finish: [C:\system.sav\FactoryUpdate\FixUp\FUNAME.CMD]
[20:03:24.14][FU_FixUP.cmd]
[20:03:24.14][FU_FixUP.cmd] Looking for FixUp.cmd in [C:\system.sav\FactoryUpdate] subfolders...
[20:03:24.14][FU_FixUP.cmd] --------------------------------------------------
[20:03:24.14][FU_FixUP.cmd]
[20:03:24.16][FU_FixUP.cmd] [C:\system.sav\FactoryUpdate\DMI_20170331] is found...
[20:03:24.16][FU_FixUP.cmd] Missing [C:\system.sav\FactoryUpdate\DMI_20170331\FixUp.cmd]... Skip this folder.
[20:03:24.16][FU_FixUP.cmd]
[20:03:24.16][FU_FixUP.cmd] [C:\system.sav\FactoryUpdate\FixUp] is found...
[20:03:24.16][FU_FixUP.cmd] Skip this folder.
[20:03:24.16][FU_FixUP.cmd]
[20:03:24.17][FU_FixUP.cmd] [C:\system.sav\FactoryUpdate\FU_6_260181_20170916_100A1] is found...
[20:03:24.17][FU_FixUP.cmd] Missing [C:\system.sav\FactoryUpdate\FU_6_260181_20170916_100A1\FixUp.cmd]... Skip this folder.
[20:03:24.17][FU_FixUP.cmd]
[20:03:24.17][FU_FixUP.cmd] [C:\system.sav\FactoryUpdate\QFEs] is found...
[20:03:24.17][FU_FixUP.cmd] Skip this folder.
[20:03:24.19][FU_FixUP.cmd]
[20:03:24.19][FU_FixUP.cmd] All FixUp.cmd in [C:\system.sav\FactoryUpdate] subfolders have been launched.
[20:03:24.19][FU_FixUP.cmd]
[20:03:24.19][FU_FixUP.cmd] Delete ["C:\system.sav\FU_FixUP.cmd.FAILURE.flg"] since all FixUp.cmd file[s] should be launched...
[20:03:24.19][FU_FixUP.cmd] --------------------------------------------------
[20:03:24.19][FU_FixUP.cmd] [FU_FixUP.cmd] has completed...
[20:03:24.20][FU_FixUP.cmd] **************************************************
[20:03:24.20] FixUps.cmd completed...
[20:03:24.20] ---------------------------------------------------------------------
[20:03:35.18][ChkMPM.cmd] **************************************************
[20:03:35.18][ChkMPM.cmd] [c:\SYSTEM.SAV\ExitProc\ChkMPM.cmd] has started...
[20:03:35.20][ChkMPM.cmd] --------------------------------------------------
[20:03:35.20][ChkMPM.cmd]
[20:03:35.20][ChkMPM.cmd] Create ["C:\system.sav\ChkMPM.cmd.FAILURE.flg"]...
[20:03:35.20][ChkMPM.cmd] [C:\system.sav\Exclude\BiosConfig] doesn't exist...
[20:03:35.20][ChkMPM.cmd] This might be Recovery flow.
[20:03:35.20][ChkMPM.cmd]
[20:03:35.21][ChkMPM.cmd] Delete ["C:\system.sav\ChkMPM.cmd.FAILURE.flg"] file since no error detected...
[20:03:35.21][ChkMPM.cmd] --------------------------------------------------
[20:03:35.21][ChkMPM.cmd] [ChkMPM.cmd] has completed...
[20:03:35.21][ChkMPM.cmd] **************************************************
[20:03:39.39][FormatDsk.cmd] **************************************************
[20:03:39.39][FormatDsk.cmd] [FormatDsk.cmd] has started...
[20:03:39.39][FormatDsk.cmd] --------------------------------------------------
[20:03:39.39][FormatDsk.cmd] Format data disks if size is over 64GB
[20:03:39.40][FormatDsk.cmd] --------------------------------------------------
[20:03:39.40][FormatDsk.cmd]
[20:03:39.40][FormatDsk.cmd] Create ["C:\system.sav\FormatDsk.cmd.FAILURE.flg"]...
[20:03:39.40][FormatDsk.cmd]
[20:03:39.40][FormatDsk.cmd] DiskStyle = [GPT]
[20:03:39.40][FormatDsk.cmd]
sel disk 1
clean
convert GPT
create part pri
format fs=ntfs quick label=DATA
assign

Microsoft DiskPart version 10.0.15063.0

Copyright (C) Microsoft Corporation.
On computer: MININT-A70LKIQ

Disk 1 is now the selected disk.

DiskPart succeeded in cleaning the disk.

DiskPart successfully converted the selected disk to GPT format.

DiskPart succeeded in creating the specified partition.


0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
100 percent completed


DiskPart successfully formatted the volume.

DiskPart successfully assigned the drive letter or mount point.
[20:03:43.05][FormatDsk.cmd] ErrorLevel=[0]
[20:03:43.05][FormatDsk.cmd]
[20:03:43.05][FormatDsk.cmd] All commands run properly... delete ["C:\system.sav\FormatDsk.cmd.FAILURE.flg"]
[20:03:43.05][FormatDsk.cmd]
[20:03:43.05][FormatDsk.cmd] RESULT=PASSED
[20:03:43.05][FormatDsk.cmd]
[20:03:43.07][FormatDsk.cmd] --------------------------------------------------
[20:03:43.07][FormatDsk.cmd] [FormatDsk.cmd] has completed...
[20:03:43.07][FormatDsk.cmd] **************************************************
[20:03:52.15][EnableSB.cmd] **************************************************
[20:03:52.17][EnableSB.cmd] [C:\SYSTEM.SAV\ExitProc\EnableSB.cmd] has started...
[20:03:52.17][EnableSB.cmd] --------------------------------------------------
[20:03:52.17][EnableSB.cmd] No [C:\system.sav\Exclude\BiosConfig] folder ...
[20:03:52.17][EnableSB.cmd] --------------------------------------------------
[20:03:52.17][EnableSB.cmd] [EnableSB.cmd] has completed...
[20:03:52.19][EnableSB.cmd] **************************************************
[20:04:26.18][CreateE.cmd] **************************************************
[20:04:26.19][CreateE.cmd] [C:\SYSTEM.SAV\FactoryUpdate\CreateE.cmd] has started...
[20:04:26.19][CreateE.cmd] --------------------------------------------------
[20:04:26.19][CreateE.cmd] Start CreatE.cmd at FactoryUpdate... PASS2
[20:04:26.19][CreateE.cmd] --------------------------------------------------
[20:04:26.19][CreateE.cmd] Create ["C:\system.sav\CreateE.cmd.FAILURE.flg"]...
[20:04:26.21][CreateE.cmd]
[20:04:26.21][CreateE.cmd]
[20:04:26.21][CreateE.cmd]
[20:04:26.21][CreateE.cmd] ************************************************************
[20:04:26.21][CreateE.cmd] ************************************************************
I'm on \\?\PhysicalDrive0...
REQ : Delete ESP...
REQ : Delete MSR...
Target device to modify is \\?\PhysicalDrive0...


----------------------------------------
Name : \\?\PhysicalDrive0
AdaptorName : Standard NVM Express Controller
DevicePath : \\?\scsi#disk&ven_nvme&prod_samsung_mzvlw128#5&2850ec36&0&000000#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
FriendlyName : SAMSUNG MZVLW128HEGR-000H1
DeviceType : 7
MediaType : 12
Signature : -767558330
Size in Byte : 128035676160
Size in GB : 119
Bytes/Sector : 512
PartitionStyle: GPT
Flags : 1000
----------------------------------------
Num of Partition = 2
----------------------------------------
Flags : 0
Offset : 290455552
Size : 97103380480
attributes : 0000000000000000
name : Basic data partition
Partition ID : FEF16FAE-5E2B-47AF-B39B-A92CD077B8F5
PartitionType: EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
----------------------------------------
Flags : 0
Offset : 97393836032
Size : 1048576000
attributes : 0000000000000000
name : Basic data partition
Partition ID : AC6D3590-C043-4F36-B118-62B43E8290AF
PartitionType: EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
----------------------------------------

----------------------------------------
Name : \\?\PhysicalDrive1
AdaptorName : Intel(R) 200 Series Chipset Family SATA AHCI Controller
DevicePath : \\?\scsi#disk&ven_toshiba&prod_dt01aca100#4&1cd60a9&0&000000#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
FriendlyName : TOSHIBA DT01ACA100
DeviceType : 7
MediaType : 12
Signature : -2066958249
Size in Byte : 1000204886016
Size in GB : 931
Bytes/Sector : 512
PartitionStyle: GPT
Flags : 1000
----------------------------------------
Num of Partition = 1
----------------------------------------
Flags : 0
Offset : 1048576
Size : 1000203091968
attributes : 0000000000000000
name : Basic data partition
Partition ID : 23373803-EE0E-46CA-8022-53003AC78858
PartitionType: EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
----------------------------------------

[20:04:27.44][CreateE.cmd] ************************************************************
[20:04:27.44][CreateE.cmd] ************************************************************
[20:04:27.44][CreateE.cmd]
[20:04:27.44][CreateE.cmd]
[20:04:27.48][CreateE.cmd] --------------------------------------------------
[20:04:27.48][CreateE.cmd] [CreateDESP.txt]
[20:04:27.48][CreateE.cmd] --------------------------------------------------
REM size =[97103380480]
REM offset =[290455552] Bytes
REM nOffset =[283648]
REM ESP size =[260]
sel vol c
list part
list vol
create part MSR offset=267264
create part EFI offset=1024
assign letter=s
format fs=FAT32 quick
rescan
list disk
list vol
list part

[20:04:27.50][CreateE.cmd] --------------------------------------------------
[20:04:27.50][CreateE.cmd]
[20:04:27.50][CreateE.cmd] run DiskPart.exe /s C:\System.sav\FactoryUpdate\CreateDESP.txt

Microsoft DiskPart version 10.0.15063.0

Copyright (C) Microsoft Corporation.
On computer: MININT-3IJVSMB

Volume 1 is the selected volume.

Partition ### Type Size Offset
------------- ---------------- ------- -------
* Partition 1 Primary 90 GB 277 MB
Partition 2 Primary 1000 MB 90 GB

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 0 G DVD-ROM 0 B No Media
* Volume 1 C NTFS Partition 90 GB Healthy
Volume 2 D BP FAT32 Partition 1000 MB Healthy
Volume 3 E DATA NTFS Partition 931 GB Healthy
Volume 4 F Removable 0 B No Media

DiskPart succeeded in creating the specified partition.

DiskPart succeeded in creating the specified partition.

DiskPart successfully assigned the drive letter or mount point.


0 percent completed
100 percent completed


DiskPart successfully formatted the volume.

Please wait while DiskPart scans your configuration...

DiskPart has finished scanning your configuration.

Disk ### Status Size Free Dyn Gpt
-------- ------------- ------- ------- --- ---
* Disk 0 Online 119 GB 27 GB *
Disk 1 Online 931 GB 0 B *
Disk 2 No Media 0 B 0 B

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 0 G DVD-ROM 0 B No Media
Volume 1 C NTFS Partition 90 GB Healthy
Volume 2 D BP FAT32 Partition 1000 MB Healthy
Volume 3 E DATA NTFS Partition 931 GB Healthy
Volume 4 F Removable 0 B No Media
* Volume 5 S FAT32 Partition 260 MB Healthy Hidden

Partition ### Type Size Offset
------------- ---------------- ------- -------
* Partition 4 System 260 MB 1024 KB
Partition 3 Reserved 16 MB 261 MB
Partition 1 Primary 90 GB 277 MB
Partition 2 Primary 1000 MB 90 GB
[20:04:28.56][CreateE.cmd] ErrorLevel=[0]
[20:04:28.56][CreateE.cmd]
[20:04:28.56][CreateE.cmd] Run [BCDBoot.exe c:\windows] to copy boot files to ESP.
Boot files successfully created.
[20:04:29.05][CreateE.cmd] ErrorLevel=[0]
[20:04:29.05][CreateE.cmd]
[20:04:29.05][CreateE.cmd] RESULT=PASSED
[20:04:29.05][CreateE.cmd]
[20:04:29.07][CreateE.cmd] Delete ["C:\system.sav\CreateE.cmd.FAILURE.flg"] because no error detected...
[20:04:29.07][CreateE.cmd] --------------------------------------------------
[20:04:29.07][CreateE.cmd] [CreateE.cmd] has completed...
[20:04:29.07][CreateE.cmd] **************************************************
[20:04:36.24][InactiveSP.cmd] **************************************************
[20:04:36.24][InactiveSP.cmd] [InactiveSP.cmd] has started...
[20:04:36.24][InactiveSP.cmd] --------------------------------------------------
[20:04:36.24][InactiveSP.cmd] Inactive System Parition...
[20:04:36.25][InactiveSP.cmd] --------------------------------------------------
[20:04:36.25][InactiveSP.cmd]
[20:04:36.25][InactiveSP.cmd] Create ["C:\system.sav\InactiveSP.cmd.FAILURE.flg"]...
[20:04:36.25][InactiveSP.cmd]
[20:04:36.25][InactiveSP.cmd] Inactive ESP...
[20:04:36.27][InactiveSP.cmd]
[20:04:36.27][DrvLtr2ESP.cmd] **************************************************
[20:04:36.28][DrvLtr2ESP.cmd] [C:\SYSTEM.SAV\ExitProc\DrvLtr2ESP.cmd] has started...
[20:04:36.28][DrvLtr2ESP.cmd] --------------------------------------------------
[20:04:36.28][DrvLtr2ESP.cmd] Create ["C:\system.sav\DrvLtr2ESP.cmd.FAILURE.flg"] file...
[20:04:36.28][DrvLtr2ESP.cmd]
[20:04:36.28][DrvLtr2ESP.cmd]
[20:04:36.28][DrvLtr2ESP.cmd] Detect ESP partition index...
[20:04:36.30][DrvLtr2ESP.cmd]
[20:04:36.38][DrvLtr2ESP.cmd] ESP partition index = [4]
[20:04:36.38][DrvLtr2ESP.cmd] ESP drive letter = [S:]
[20:04:36.40][DrvLtr2ESP.cmd]
[20:04:36.40][DrvLtr2ESP.cmd] Assign drive letter to ESP...
[20:04:36.40][DrvLtr2ESP.cmd]

Microsoft DiskPart version 10.0.15063.0

Copyright (C) Microsoft Corporation.
On computer: MININT-3IJVSMB

Volume 1 is the selected volume.

Partition 4 is now the selected partition.

Partition ### Type Size Offset
------------- ---------------- ------- -------
* Partition 4 System 260 MB 1024 KB
Partition 3 Reserved 16 MB 261 MB
Partition 1 Primary 90 GB 277 MB
Partition 2 Primary 1000 MB 90 GB

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 0 G DVD-ROM 0 B No Media
Volume 1 C NTFS Partition 90 GB Healthy
Volume 2 D BP FAT32 Partition 1000 MB Healthy
* Volume 3 S FAT32 Partition 260 MB Healthy Hidden
Volume 4 E DATA NTFS Partition 931 GB Healthy
Volume 5 F Removable 0 B No Media

DiskPart successfully removed the drive letter or mount point.

DiskPart successfully assigned the drive letter or mount point.

Partition ### Type Size Offset
------------- ---------------- ------- -------
* Partition 4 System 260 MB 1024 KB
Partition 3 Reserved 16 MB 261 MB
Partition 1 Primary 90 GB 277 MB
Partition 2 Primary 1000 MB 90 GB

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 0 G DVD-ROM 0 B No Media
Volume 1 C NTFS Partition 90 GB Healthy
Volume 2 D BP FAT32 Partition 1000 MB Healthy
* Volume 3 S FAT32 Partition 260 MB Healthy Hidden
Volume 4 E DATA NTFS Partition 931 GB Healthy
Volume 5 F Removable 0 B No Media
[20:04:36.58][DrvLtr2ESP.cmd] Succeed in assigning drive letter to ESP
[20:04:36.58][DrvLtr2ESP.cmd] Delete ["C:\system.sav\DrvLtr2ESP.cmd.FAILURE.flg"] file since no errors detected...
[20:04:36.58][DrvLtr2ESP.cmd] --------------------------------------------------
[20:04:36.58][DrvLtr2ESP.cmd] [DrvLtr2ESP.cmd] has completed...
[20:04:36.58][DrvLtr2ESP.cmd] **************************************************
[20:04:36.59][InactiveSP.cmd] Inactive ESP successfully.
[20:04:36.59][InactiveSP.cmd]
[20:04:36.59][InactiveSP.cmd] Active BP...
[20:04:36.59][InactiveSP.cmd]
[20:04:36.61][InactiveSP.cmd] BP drive letter = [D:]
[20:04:36.62][InactiveSP.cmd] BP is already active.
[20:04:36.62][InactiveSP.cmd]
[20:04:36.62][InactiveSP.cmd] Delete ["C:\system.sav\InactiveSP.cmd.FAILURE.flg"] file since no errors detected...
[20:04:36.62][InactiveSP.cmd] --------------------------------------------------
[20:04:36.62][InactiveSP.cmd] [InactiveSP.cmd] has completed...
[20:04:36.62][InactiveSP.cmd] **************************************************
[20:04:45.62][Partition.cmd] **************************************************
[20:04:45.67][Partition.cmd] [C:\SYSTEM.SAV\Util\Partition.cmd] has started...
[20:04:45.73][Partition.cmd] --------------------------------------------------
[20:04:45.74][Partition.cmd]
[20:04:45.74][Partition.cmd] Create ["C:\system.sav\Partition.cmd.FAILURE.flg"]...
[20:04:45.76][Partition.cmd]
[20:04:45.76][Partition.cmd] This is NOT China image,
[20:04:45.77][Partition.cmd] Skip DATA partition creation...
[20:04:45.77][Partition.cmd]
[20:04:45.77][Partition.cmd] --------------------------------------------------
[20:04:45.79][Partition.cmd] Set Volume label if required...
[20:04:45.81][Partition.cmd] --------------------------------------------------
[20:04:46.04][Partition.cmd] Delete ["C:\system.sav\Partition.cmd.FAILURE.flg"]...
[20:04:46.04][Partition.cmd] --------------------------------------------------
[20:04:46.06][Partition.cmd] [Partition.cmd] has completed...
[20:04:46.06][Partition.cmd] **************************************************
[20:04:52.44][PushbackBP.cmd] **************************************************
[20:04:52.44][PushbackBP.cmd] [C:\SYSTEM.SAV\2ndCap\PushbackBP.cmd] has started...
[20:04:52.45][PushbackBP.cmd] --------------------------------------------------
[20:04:52.45][PushbackBP.cmd]
[20:04:52.45][PushbackBP.cmd] Create ["C:\system.sav\PushbackBP.cmd.FAILURE.flg"]...
[20:04:52.45][PushbackBP.cmd]
[20:04:52.45][PushbackBP.cmd] Detect WinRE offset...
[20:04:52.47][PushbackBP.cmd]
[20:04:52.53][PushbackBP.cmd] Can't find WinRE partition. skip to push back BP.
[20:04:52.53][PushbackBP.cmd] Delete ["C:\system.sav\PushbackBP.cmd.FAILURE.flg"] file since no errors detected...
[20:04:52.53][PushbackBP.cmd] --------------------------------------------------
[20:04:52.55][PushbackBP.cmd] [PushbackBP.cmd] has completed...
[20:04:52.55][PushbackBP.cmd] **************************************************
[20:04:53.66][SSRDTwks.cmd] **************************************************
[20:04:53.66][SSRDTwks.cmd] [C:\SYSTEM.SAV\FactoryUpdate\SSRDTwks.cmd] has started...
[20:04:53.66][SSRDTwks.cmd] --------------------------------------------------
[20:04:53.67][SSRDTwks.cmd]
[20:04:53.67][SSRDTwks.cmd] SSRD Tweaks to change user default locale...
[20:04:53.67][SSRDTwks.cmd]
[20:04:56.24][PF4WPE.cmd] **************************************************
[20:04:56.24][PF4WPE.cmd] [PF4WPE.cmd] has started...
[20:04:56.24][PF4WPE.cmd] --------------------------------------------------
[20:04:56.24][PF4WPE.cmd] Create 1GB pagefile for WinPE use
[20:04:56.26][PF4WPE.cmd] --------------------------------------------------
[20:04:56.26][PF4WPE.cmd]
[20:04:56.26][PF4WPE.cmd] Create ["C:\system.sav\PF4WPE.cmd.FAILURE.flg"] file...
[20:04:56.26][PF4WPE.cmd]
[20:04:56.26][PF4WPE.cmd] Detect target drive for WinPE pagefile...
[20:04:56.28][PF4WPE.cmd]
[20:04:56.34][PF4WPE.cmd] Target drive = [C:]
[20:04:56.34][PF4WPE.cmd]
[20:04:56.34][PF4WPE.cmd] Create pagefile for WinPE...
[20:04:56.35][PF4WPE.cmd]


The command completed successfully.

[20:04:56.35][PF4WPE.cmd] ErrorLevel=[0]
[20:04:56.35][PF4WPE.cmd]
[20:04:56.37][PF4WPE.cmd] Delete ["C:\system.sav\PF4WPE.cmd.FAILURE.flg"] file since no errors detected...
[20:04:56.37][PF4WPE.cmd] --------------------------------------------------
[20:04:56.37][PF4WPE.cmd] [PF4WPE.cmd] has completed...
[20:04:56.37][PF4WPE.cmd] **************************************************
[20:05:16.21][SKUDef.cmd] **************************************************
[20:05:16.21][SKUDef.cmd] [C:\SYSTEM.SAV\FactoryUpdate\SKUDef.cmd] has started...
[20:05:16.21][SKUDef.cmd] --------------------------------------------------
[20:05:16.21][SKUDef.cmd] Reset default country and locale
[20:05:16.23][SKUDef.cmd] --------------------------------------------------
[20:05:16.23][SKUDef.cmd]
[20:05:16.23][SKUDef.cmd] Create ["C:\system.sav\SKUDef.cmd.FAILURE.flg"]...
[20:05:16.54][SKUDef.cmd] ECHO [20:05:16.54][SKUDef.cmd] WINDOWS VERSION=15063
[20:05:16.54][SKUDef.cmd] CScript.exe /nologo C:\SYSTEM.SAV\FactoryUpdate\SKUDef.vbs ABA US C:\SYSTEM.SAV\FactoryUpdate\SKUDef.ini
[20:05:16.56][SKUDef.cmd] SKU_DEF_COUNTRY=[244]
[20:05:16.57][SKUDef.cmd] SKU_DEF_SYS_LOC=[EN-US]
[20:05:16.57][SKUDef.cmd] -----------------------------------
[20:05:16.57][SKUDef.cmd] Reset country in administrator...
[20:05:16.57][SKUDef.cmd] -----------------------------------
The operation completed successfully.

The operation completed successfully.

The operation completed successfully.

[20:05:16.60][SKUDef.cmd] -----------------------------------
[20:05:16.60][SKUDef.cmd] Reset country in Default user...
[20:05:16.60][SKUDef.cmd] -----------------------------------
The operation completed successfully.

The operation completed successfully.

The operation completed successfully.

[20:05:16.63][SKUDef.cmd] -----------------------------------
[20:05:16.63][SKUDef.cmd] Reset System locale...
[20:05:16.63][SKUDef.cmd] -----------------------------------

Deployment Image Servicing and Management tool
Version: 10.0.15063.0

Image Version: 10.0.15063.0

Reporting offline international settings.

Default system UI language : en-US
System locale : en-US
Default time zone : Pacific Standard Time
User locale for default user : en-US
Location : United States (GEOID = 244)
Active keyboard(s) : 0409:00000409
Keyboard layered driver : PC/AT Enhanced Keyboard (101/102-Key)

Installed language(s): en-US
Type : Fully localized language.

The operation completed successfully.
[20:05:18.25][SKUDef.cmd]
[20:05:18.25][SKUDef.cmd] Delete ["C:\system.sav\SKUDef.cmd.FAILURE.flg"]...
[20:05:18.25][SKUDef.cmd] --------------------------------------------------
[20:05:18.25][SKUDef.cmd] [SKUDef.cmd] has completed...
[20:05:18.25][SKUDef.cmd] **************************************************
[20:05:21.15] ---------------------------------------------------------------------
[20:05:21.15] PIN Tweaks to hide All for BurnBoot BBV and BBV2 on restored image...
[20:05:21.15] ----------------------------------------
[20:05:21.15] Tweaks for OOBE's Unattend.xml
[20:05:21.15] to pick up the proper file...
[20:05:21.15] ----------------------------------------
[20:05:21.15] ----------------------------------------
[20:05:21.15] without Light Sensor..
[20:05:21.15] ----------------------------------------
[20:05:21.15] ---------------------------------------------------------------------
[20:05:23.33] ---------------------------------------------------------------------
[20:05:23.33] [MIR Tweaks] ...
[20:05:23.33] ---------------------------------------------------------------------
[20:05:43.23][DeviceForm.cmd] **************************************************
[20:05:43.23][DeviceForm.cmd] [C:\SYSTEM.SAV\FactoryUpdate\DeviceForm.cmd] has started...
[20:05:43.23][DeviceForm.cmd] --------------------------------------------------
[20:05:43.23][DeviceForm.cmd] Set DeviceForm on the selected systems
[20:05:43.24][DeviceForm.cmd] --------------------------------------------------
[20:05:43.24][DeviceForm.cmd]
[20:05:43.24][DeviceForm.cmd] Check if the system is Win 10 [not Win 7]...
[20:05:43.24][DeviceForm.cmd]
[20:05:43.24][DeviceForm.cmd] Check feature byte...
[20:05:43.24][DeviceForm.cmd] This system is Desktop.
[20:05:43.26][DeviceForm.cmd]
[20:05:43.26][DeviceForm.cmd] Write DeviceForm for PBR...
[20:05:43.26][DeviceForm.cmd]
[20:05:43.26][DeviceForm.cmd] Added DeviceForm=[3] for PBR.
[20:05:43.27][DeviceForm.cmd]
[20:05:43.27][DeviceForm.cmd] Write DeviceForm to Unattend.xml...
[20:05:43.27][DeviceForm.cmd]
[20:05:43.27][DeviceForm.cmd] Added DeviceForm=[3] to Unattend.xml.
[20:05:43.27][DeviceForm.cmd] --------------------------------------------------
[20:05:43.29][DeviceForm.cmd] [DeviceForm.cmd] has completed...
[20:05:43.29][DeviceForm.cmd] **************************************************
[20:05:46.42][FFSPrep.cmd] **************************************************
[20:05:46.42][FFSPrep.cmd] [C:\SYSTEM.SAV\Util\FFS\FFSPrep.cmd] has started...
[20:05:46.42][FFSPrep.cmd] --------------------------------------------------
[20:05:46.42][FFSPrep.cmd] Start FFS partition creation...
[20:05:46.43][FFSPrep.cmd] --------------------------------------------------
[20:05:46.43][FFSPrep.cmd] Generate ["C:\system.sav\FFSPrep.cmd.FAILURE.flg"]...
[20:05:46.43][FFSPrep.cmd]
[20:05:46.43][FFSPrep.cmd] Checking if FFS partition exists...
[20:05:46.43][FFSPrep.cmd]
[20:05:46.48][FFSPrep.cmd] NO FFS partition detected...
[20:05:46.48][FFSPrep.cmd]
[20:05:46.48][FFSPrep.cmd] Checking FFS creation by flag file...
[20:05:46.50][FFSPrep.cmd]
[20:05:46.50][FFSPrep.cmd] No flag is detected. Check RStone.ini to decide to run FFS creation.
[20:05:46.50][FFSPrep.cmd]
[20:05:46.50][FFSPrep.cmd] Checking FFS creation by RStone.
[20:05:46.51][FFSPrep.cmd]
[20:05:46.51][FFSPrep.cmd] RStone.ini doesn't show iFFS=1.
[20:05:46.51][FFSPrep.cmd]
[20:05:46.51][FFSPrep.cmd] FFS is not required...
[20:05:46.51][FFSPrep.cmd]
[20:05:46.51][FFSPrep.cmd] Delete ["C:\system.sav\FFSPrep.cmd.FAILURE.flg"] because no FFS is required... NO MORE CREATE ACTION.
[20:05:46.56][FFSPrep.cmd]
[20:05:46.56][FFSPrep.cmd] --------------------------------------------------
[20:05:46.57][FFSPrep.cmd] FFS partition is NOT found...
[20:05:46.57][FFSPrep.cmd]
[20:05:46.57][FFSPrep.cmd] iFFS=NO_DETECTED
[20:05:46.59][FFSPrep.cmd] iFFSPart=NOT_EXIST
[20:05:46.59][FFSPrep.cmd] --------------------------------------------------
[20:05:46.61][FFSPrep.cmd] [FFSPrep.cmd] has completed...
[20:05:46.61][FFSPrep.cmd] **************************************************
[20:05:53.87][Find4QFE.cmd] **************************************************
[20:05:53.87][Find4QFE.cmd] [Find4QFE.cmd] has started...
[20:05:53.88][Find4QFE.cmd] --------------------------------------------------
[20:05:53.88][Find4QFE.cmd] Offline QFE installation
[20:05:53.88][Find4QFE.cmd] --------------------------------------------------
[20:05:53.88][Find4QFE.cmd]
[20:05:53.88][Find4QFE.cmd] Create ["C:\system.sav\Find4QFE.cmd.FAILURE.flg"] file...
[20:05:53.90][Find4QFE.cmd]
[20:05:53.90][Find4QFE.cmd] Detect target drive for Sandbox...
[20:05:53.90][Find4QFE.cmd]
[20:05:53.96][Find4QFE.cmd] Target drive = [C:]
[20:05:53.96][Find4QFE.cmd]
[20:05:53.96][Find4QFE.cmd] Install QFEs under [C:\System.sav\FactoryUpdate\QFEs]...
[20:05:53.98][Find4QFE.cmd]
[20:05:53.98][Find4QFE.cmd]
[20:05:53.98][Find4QFE.cmd] Delete Sandbox...
[20:05:53.98][Find4QFE.cmd]
[20:05:53.99][Find4QFE.cmd] ErrorLevel=[0]
[20:05:53.99][Find4QFE.cmd]
[20:05:54.00][Find4QFE.cmd] Delete QFE folder [C:\System.sav\FactoryUpdate\QFEs]...
[20:05:54.00][Find4QFE.cmd]
[20:05:54.00][Find4QFE.cmd] RD /S /Q C:\System.sav\FactoryUpdate\QFEs
[20:05:54.00][Find4QFE.cmd] ErrorLevel=[0]
[20:05:54.01][Find4QFE.cmd]
[20:05:54.01][Find4QFE.cmd] Check result for QFE installation...
[20:05:54.02][Find4QFE.cmd]
[20:05:54.02][Find4QFE.cmd] ErrorLevel=[1]
[20:05:54.02][Find4QFE.cmd]
[20:05:54.03][Find4QFE.cmd] Delete ["C:\system.sav\Find4QFE.cmd.FAILURE.flg"] file since no errors detected...
[20:05:54.03][Find4QFE.cmd] --------------------------------------------------
[20:05:54.03][Find4QFE.cmd] [Find4QFE.cmd] has completed...
[20:05:54.03][Find4QFE.cmd] **************************************************
[20:06:05.18][HPEULA_Alignment.cmd] **************************************************
[20:06:05.27][HPEULA_Alignment.cmd] [C:\hp\HPEULA\HPEULA_Alignment.cmd] has started...
[20:06:05.34][HPEULA_Alignment.cmd] --------------------------------------------------
[20:06:05.37][HPEULA_Alignment.cmd] [HP EULA]
[20:06:05.37][HPEULA_Alignment.cmd] This will get EULA type [McAfee/MS Sign/Normal]
[20:06:05.37][HPEULA_Alignment.cmd] as parameter to decide the source folder.
[20:06:05.38][HPEULA_Alignment.cmd] And, it refers Option Code to copy proper
[20:06:05.38][HPEULA_Alignment.cmd] EULA.rtf file[s] to proper folder.
[20:06:05.40][HPEULA_Alignment.cmd] --------------------------------------------------
[20:06:05.40][HPEULA_Alignment.cmd] EULA folder = [McAfee] is required...
[20:06:05.42][HPEULA_Alignment.cmd] Option Code = [ABA].
[20:06:05.43][HPEULA_Alignment.cmd]
[20:06:05.43][HPEULA_Alignment.cmd] --------------------------------------------------
[20:06:05.43][HPEULA_Alignment.cmd] Source EULA path [C:\hp\HPEULA\McAfee\00\EULA.rtf]
[20:06:05.45][HPEULA_Alignment.cmd] Source EULA HTML path [C:\hp\HPEULA\McAfee\00\EULA.html]
[20:06:05.45][HPEULA_Alignment.cmd] Target path [ROOT]
[20:06:05.46][HPEULA_Alignment.cmd] Target is root..
[20:06:05.46][HPEULA_Alignment.cmd] Target folder [C:\Windows\system32\oobe\info]
[20:06:05.46][HPEULA_Alignment.cmd]
[20:06:05.48][HPEULA_Alignment.cmd] Run [cscript.exe /nologo C:\hp\HPEULA\UpdateXML.vbs C:\hp\HPEULA\McAfee\00\EULA.rtf C:\Windows\system32\oobe\info C:\hp\HPEULA\]
[20:06:05.54][HPEULA_Alignment.cmd] [C:\Windows\system32\oobe\info\EULA.rtf] is copied proerply...
[20:06:05.54][HPEULA_Alignment.cmd] OOBE.xml is updated proerply...
[20:06:05.55][HPEULA_Alignment.cmd]
[20:06:05.55][HPEULA_Alignment.cmd] Copied EULA.rtf properly... delete ["C:\system.sav\HPEULA_Alignment.cmd.FAILURE.flg"]
[20:06:05.57][HPEULA_Alignment.cmd] --------------------------------------------------
[20:06:05.59][HPEULA_Alignment.cmd] RESULT=PASSED
[20:06:05.59][HPEULA_Alignment.cmd] --------------------------------------------------
[20:06:05.59][HPEULA_Alignment.cmd] [HPEULA_Alignment.cmd] has completed...
[20:06:05.60][HPEULA_Alignment.cmd] **************************************************
[20:06:15.02][ChkError.cmd] **************************************************
[20:06:15.02][ChkError.cmd] [C:\SYSTEM.SAV\ExitProc\ErrorChk\ChkError.cmd] has started...
[20:06:15.04][ChkError.cmd] --------------------------------------------------
[20:06:15.04][ChkError.cmd] Check SW Error...
[20:06:15.04][ChkError.cmd] --------------------------------------------------
[20:06:15.06][ChkError.cmd]
[20:06:15.06][ChkError.cmd] Create ["C:\system.sav\ChkError.cmd.FAILURE.flg"] file...
[20:06:15.06][ChkError.cmd]
[20:06:15.06][ChkError.cmd] Logfile [C:\system.sav\Logs\CheckLog\ChkErr_PASS2_FUpdate_END.log]...
[20:06:15.06][ChkError.cmd]
[20:06:15.07][ChkError.cmd] Check 2nd parameter [PASS2FU]
[20:06:15.07][ChkError.cmd]
[20:06:15.07][ChkError.cmd] Error Checking items : [MEMDUMP,REGDEV,TIMEOUT,BADLINE]
[20:06:15.07][ChkError.cmd] --------------------------------------------------
[20:06:15.07][ChkError.cmd] Checking : Memory Dump
[20:06:15.09][ChkError.cmd] Could not find memory dump...
[20:06:15.09][ChkError.cmd]
[20:06:15.09][ChkError.cmd] [DumpFile]
[20:06:15.09][ChkError.cmd] Result=PASSED
[20:06:15.09][ChkError.cmd] --------------------------------------------------
[20:06:15.10][ChkError.cmd] Checking : Yellow-Bang
[20:06:15.10][ChkError.cmd]
[20:06:15.10][ChkError.cmd] This is under WinPE environment...
[20:06:15.10][ChkError.cmd] Skip Yellow-bang checking...
[20:06:15.10][ChkError.cmd] [RegistryDevicesCheck]
[20:06:15.12][ChkError.cmd] Result=IGNORED_BECAUSE_WINPE_ENV
[20:06:15.12][ChkError.cmd] --------------------------------------------------
[20:06:15.12][ChkError.cmd] Checking : Timeout in INSTALL.log
[20:06:15.12][ChkError.cmd]
[20:06:15.12][ChkError.cmd] Run [FIND.exe /I 'timeout with' C:\System.sav\Util\Install.log]
[20:06:15.33][ChkError.cmd] Run [FIND.exe /I 'timeout wait' C:\System.sav\Util\Install.log]
[20:06:15.53][ChkError.cmd] There is NO timeout in install.log file.
[20:06:15.53][ChkError.cmd]
[20:06:15.53][ChkError.cmd] [TIMEOUT]
[20:06:15.53][ChkError.cmd] Result=PASSED
[20:06:15.53][ChkError.cmd] --------------------------------------------------
[20:06:15.54][ChkError.cmd] Checking : Bad Line in INSTALL.log
[20:06:15.54][ChkError.cmd]
[20:06:15.54][ChkError.cmd] Run [cscript.exe c:\System.sav\ExitProc\ErrorChk\BadLine.vbs]
[20:06:15.62][ChkError.cmd] No BadLine in install.log file.
[20:06:15.63][ChkError.cmd]
[20:06:15.63][ChkError.cmd] [BADLINE]
[20:06:15.63][ChkError.cmd] Result=PASSED
[20:06:15.63][ChkError.cmd]
[20:06:15.63][ChkError.cmd] --------------------------------------------------
[20:06:15.63][ChkError.cmd] Delete ["C:\system.sav\ChkError.cmd.FAILURE.flg"] since no error detected...
[20:06:15.64][ChkError.cmd]
[20:06:15.64][ChkError.cmd] No SW issue found...
[20:06:15.64][ChkError.cmd]
[20:06:15.64][ChkError.cmd] --------------------------------------------------
[20:06:15.64][ChkError.cmd] [ChkError.cmd] has completed...
[20:06:15.66][ChkError.cmd] **************************************************
[20:06:15.70][ResetLoc.cmd] **************************************************
[20:06:15.72][ResetLoc.cmd] [C:\SYSTEM.SAV\FactoryUpdate\ResetLoc.cmd] has started...
[20:06:15.72][ResetLoc.cmd] --------------------------------------------------
[20:06:15.72][ResetLoc.cmd] Reset locale
[20:06:15.72][ResetLoc.cmd] --------------------------------------------------
[20:06:15.72][ResetLoc.cmd]
[20:06:15.74][ResetLoc.cmd] Create ["C:\system.sav\ResetLoc.cmd.FAILURE.flg"]...
[20:06:15.79][ResetLoc.cmd] System BCD exists...
The operation completed successfully.
The operation completed successfully.
[20:06:15.87][ResetLoc.cmd]
[20:06:15.87][ResetLoc.cmd] Run [bcdedit.exe /enum all]
[20:06:15.87][ResetLoc.cmd] --------------------------------------------------

Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=S:
path \EFI\Microsoft\Boot\bootmgfw.efi
description Windows Boot Manager
locale en-US
inherit {globalsettings}
default {default}
resumeobject {48bf29df-3ccc-11ea-ac80-a0144180ca1e}
displayorder {default}
toolsdisplayorder {memdiag}
timeout 30

Windows Boot Loader
-------------------
identifier {default}
device partition=C:
path \windows\system32\winload.efi
description Windows 10
locale en-US
inherit {bootloadersettings}
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice partition=C:
systemroot \windows
resumeobject {48bf29df-3ccc-11ea-ac80-a0144180ca1e}
nx OptIn
bootmenupolicy Standard

Resume from Hibernate
---------------------
identifier {48bf29df-3ccc-11ea-ac80-a0144180ca1e}
device partition=C:
path \windows\system32\winresume.efi
description Windows Resume Application
locale en-us
inherit {resumeloadersettings}
isolatedcontext Yes
allowedinmemorysettings 0x15000075
filepath \hiberfil.sys
bootmenupolicy Standard

Windows Memory Tester
---------------------
identifier {memdiag}
device partition=S:
path \EFI\Microsoft\Boot\memtest.efi
description Windows Memory Diagnostic
locale en-us
inherit {globalsettings}
badmemoryaccess Yes

EMS Settings
------------
identifier {emssettings}
bootems No

Debugger Settings
-----------------
identifier {dbgsettings}
debugtype Local

RAM Defects
-----------
identifier {badmemory}

Global Settings
---------------
identifier {globalsettings}
inherit {dbgsettings}
{emssettings}
{badmemory}

Boot Loader Settings
--------------------
identifier {bootloadersettings}
inherit {globalsettings}
{hypervisorsettings}

Hypervisor Settings
-------------------
identifier {hypervisorsettings}
hypervisordebugtype Serial
hypervisordebugport 1
hypervisorbaudrate 115200

Resume Loader Settings
----------------------
identifier {resumeloadersettings}
inherit {globalsettings}
[20:06:15.93][ResetLoc.cmd] --------------------------------------------------
[20:06:15.93][ResetLoc.cmd]
[20:06:15.93][ResetLoc.cmd] Delete ["C:\system.sav\ResetLoc.cmd.FAILURE.flg"]...
[20:06:15.93][ResetLoc.cmd] --------------------------------------------------
[20:06:15.93][ResetLoc.cmd] [ResetLoc.cmd] has completed...
[20:06:15.93][ResetLoc.cmd] **************************************************
[20:06:18.17][ActiveSP.cmd] **************************************************
[20:06:18.17][ActiveSP.cmd] [ActiveSP.cmd] has started...
[20:06:18.19][ActiveSP.cmd] --------------------------------------------------
[20:06:18.19][ActiveSP.cmd] Active System Parition...
[20:06:18.19][ActiveSP.cmd] --------------------------------------------------
[20:06:18.19][ActiveSP.cmd]
[20:06:18.19][ActiveSP.cmd] Create ["C:\system.sav\ActiveSP.cmd.FAILURE.flg"] file...
[20:06:18.20][ActiveSP.cmd]
[20:06:18.20][ActiveSP.cmd] Active ESP...
[20:06:18.20][ActiveSP.cmd]
[20:06:18.22][DrvLtr2ESP.cmd] **************************************************
[20:06:18.22][DrvLtr2ESP.cmd] [C:\SYSTEM.SAV\ExitProc\DrvLtr2ESP.cmd] has started...
[20:06:18.23][DrvLtr2ESP.cmd] --------------------------------------------------
[20:06:18.23][DrvLtr2ESP.cmd] Create ["C:\system.sav\DrvLtr2ESP.cmd.FAILURE.flg"] file...
[20:06:18.23][DrvLtr2ESP.cmd]
[20:06:18.23][DrvLtr2ESP.cmd]
[20:06:18.24][DrvLtr2ESP.cmd] Detect ESP partition index...
[20:06:18.24][DrvLtr2ESP.cmd]
[20:06:18.30][DrvLtr2ESP.cmd] ESP partition index = [4]
[20:06:18.32][DrvLtr2ESP.cmd] ESP drive letter = [S:]
[20:06:18.32][DrvLtr2ESP.cmd]
[20:06:18.32][DrvLtr2ESP.cmd] Assign drive letter to ESP...
[20:06:18.32][DrvLtr2ESP.cmd]

Microsoft DiskPart version 10.0.15063.0

Copyright (C) Microsoft Corporation.
On computer: MININT-3IJVSMB

Volume 1 is the selected volume.

Partition 4 is now the selected partition.

Partition ### Type Size Offset
------------- ---------------- ------- -------
* Partition 4 System 260 MB 1024 KB
Partition 3 Reserved 16 MB 261 MB
Partition 1 Primary 90 GB 277 MB
Partition 2 Primary 1000 MB 90 GB

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 0 G DVD-ROM 0 B No Media
Volume 1 C Windows NTFS Partition 90 GB Healthy Pagefile
Volume 2 D BP FAT32 Partition 1000 MB Healthy
* Volume 3 S FAT32 Partition 260 MB Healthy Hidden
Volume 4 E DATA NTFS Partition 931 GB Healthy
Volume 5 F Removable 0 B No Media

DiskPart successfully removed the drive letter or mount point.

DiskPart successfully assigned the drive letter or mount point.

Partition ### Type Size Offset
------------- ---------------- ------- -------
* Partition 4 System 260 MB 1024 KB
Partition 3 Reserved 16 MB 261 MB
Partition 1 Primary 90 GB 277 MB
Partition 2 Primary 1000 MB 90 GB

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 0 G DVD-ROM 0 B No Media
Volume 1 C Windows NTFS Partition 90 GB Healthy Pagefile
Volume 2 D BP FAT32 Partition 1000 MB Healthy
* Volume 3 S FAT32 Partition 260 MB Healthy Hidden
Volume 4 E DATA NTFS Partition 931 GB Healthy
Volume 5 F Removable 0 B No Media
[20:06:18.52][DrvLtr2ESP.cmd] Succeed in assigning drive letter to ESP
[20:06:18.52][DrvLtr2ESP.cmd] Delete ["C:\system.sav\DrvLtr2ESP.cmd.FAILURE.flg"] file since no errors detected...
[20:06:18.52][DrvLtr2ESP.cmd] --------------------------------------------------
[20:06:18.52][DrvLtr2ESP.cmd] [DrvLtr2ESP.cmd] has completed...
[20:06:18.52][DrvLtr2ESP.cmd] **************************************************
[20:06:18.54][ActiveSP.cmd] Active ESP successfully.
[20:06:18.54][ActiveSP.cmd] Bcdedit /set {default} device partition=C:
The operation completed successfully.
[20:06:19.40][ActiveSP.cmd] Bcdedit /set {default} osdevice partition=C:
The operation completed successfully.
[20:06:19.84][ActiveSP.cmd]
[20:06:19.84][ActiveSP.cmd] Inactive BP...
[20:06:19.84][ActiveSP.cmd]
[20:06:19.86][ActiveSP.cmd] BP drive letter = [D:]
1 dir(s) moved.
[20:06:19.87][ActiveSP.cmd] Inactive BP successfully.
[20:06:19.87][ActiveSP.cmd]
[20:06:19.87][ActiveSP.cmd] Delete ["C:\system.sav\ActiveSP.cmd.FAILURE.flg"] file since no errors detected...
[20:06:19.87][ActiveSP.cmd] --------------------------------------------------
[20:06:19.87][ActiveSP.cmd] [ActiveSP.cmd] has completed...
[20:06:19.87][ActiveSP.cmd] **************************************************
[20:06:19.94][DumpBCD.cmd] **************************************************
[20:06:19.95][DumpBCD.cmd] [C:\SYSTEM.SAV\ExitProc\DataColl\DumpBCD.cmd] has started...
[20:06:19.95][DumpBCD.cmd] --------------------------------------------------
[20:06:19.95][DumpBCD.cmd] STAGE : [PASS2_FUPDATE_EUE]
[20:06:19.95][DumpBCD.cmd] Dump BCD...
[20:06:19.95][DumpBCD.cmd] --------------------------------------------------
[20:06:19.97][DumpBCD.cmd]
[20:06:19.97][DumpBCD.cmd]
[20:06:20.44][DumpBCD.cmd]
[20:06:20.44][DumpBCD.cmd] --------------------------------------------------
[20:06:20.44][DumpBCD.cmd] [DumpBCD.cmd] has completed...
[20:06:20.44][DumpBCD.cmd] **************************************************
Volume in drive C is Windows
Volume Serial Number is 2674-2E39

Directory of C:\

01/21/2020 07:07 PM 1,048,576,000 pagefile.sys
01/21/2020 07:07 PM 16,777,216 swapfile.sys
2 File(s) 1,065,353,216 bytes
0 Dir(s) 62,809,333,760 bytes free
[19:08:44.39][DumpBCD.cmd] **************************************************
[19:08:44.39][DumpBCD.cmd] [C:\SYSTEM.SAV\ExitProc\DataColl\DumpBCD.cmd] has started...
[19:08:44.40][DumpBCD.cmd] --------------------------------------------------
[19:08:44.40][DumpBCD.cmd] STAGE : [PASS2_OSUPDATE_PI]
[19:08:44.40][DumpBCD.cmd] Dump BCD...
[19:08:44.42][DumpBCD.cmd] --------------------------------------------------
[19:08:44.42][DumpBCD.cmd]
[19:08:44.43][DumpBCD.cmd]
[19:08:44.92][DumpBCD.cmd]
[19:08:44.92][DumpBCD.cmd] --------------------------------------------------
[19:08:44.93][DumpBCD.cmd] [DumpBCD.cmd] has completed...
[19:08:44.93][DumpBCD.cmd] **************************************************
[19:08:46.92][DelPF4WPE.cmd] **************************************************
[19:08:46.93][DelPF4WPE.cmd] [DelPF4WPE.cmd] has started...
[19:08:46.93][DelPF4WPE.cmd] --------------------------------------------------
[19:08:46.93][DelPF4WPE.cmd] Delete pagefile for WinPE use
[19:08:46.95][DelPF4WPE.cmd] --------------------------------------------------
[19:08:46.95][DelPF4WPE.cmd]
[19:08:46.96][DelPF4WPE.cmd] Create ["C:\system.sav\DelPF4WPE.cmd.FAILURE.flg"] file...
[19:08:46.96][DelPF4WPE.cmd]
[19:08:46.98][DelPF4WPE.cmd] Detect target drive for WinPE pagefile...
[19:08:46.98][DelPF4WPE.cmd]
[19:08:47.14][DelPF4WPE.cmd] Target drive = [C:]
[19:08:47.14][DelPF4WPE.cmd]
[19:08:47.15][DelPF4WPE.cmd] Delete pagefile for WinPE...
[19:08:47.15][DelPF4WPE.cmd]
[19:08:47.17][DelPF4WPE.cmd] ErrorLevel=[0]
[19:08:47.17][DelPF4WPE.cmd] ErrorLevel=[0]
[19:08:47.17][DelPF4WPE.cmd]
[19:08:47.18][DelPF4WPE.cmd] Delete ["C:\system.sav\DelPF4WPE.cmd.FAILURE.flg"] file since no errors detected...
[19:08:47.18][DelPF4WPE.cmd] --------------------------------------------------
[19:08:47.20][DelPF4WPE.cmd] [DelPF4WPE.cmd] has completed...
[19:08:47.20][DelPF4WPE.cmd] **************************************************
[19:08:48.28][PreBBV1Cln.cmd] **************************************************
[19:08:48.29][PreBBV1Cln.cmd] [C:\SYSTEM.SAV\bbv\PreBBV1Cln.cmd] has started...
[19:08:48.29][PreBBV1Cln.cmd] --------------------------------------------------
[19:08:48.31][PreBBV1Cln.cmd] Delete C:\FILTERED folder
[19:08:48.31][PreBBV1Cln.cmd] --------------------------------------------------
[19:08:48.31][PreBBV1Cln.cmd]
[19:08:48.32][PreBBV1Cln.cmd] Check if [C:\FILTERED] exists...
[19:08:48.32][PreBBV1Cln.cmd] [C:\FILTERED] folder... Exit
[19:08:48.34][PreBBV1Cln.cmd] --------------------------------------------------
[19:08:48.34][PreBBV1Cln.cmd] [PreBBV1Cln.cmd] has completed...
[19:08:48.35][PreBBV1Cln.cmd] **************************************************
[19:13:33.66][PreBBV2.cmd] **************************************************
[19:13:33.66][PreBBV2.cmd] [C:\SYSTEM.SAV\bbv\PreBBV2.cmd] has started...
[19:13:33.67][PreBBV2.cmd] --------------------------------------------------
[19:13:33.67][PreBBV2.cmd]
[19:13:33.69][PreBBV2.cmd] Create ["C:\system.sav\PreBBV2.cmd.FAILURE.flg"]...
[19:13:33.69][PreBBV2.cmd]
[19:13:33.71][PreBBV2.cmd]
[19:13:33.71][PreBBV2.cmd] Set UIA Error Code to 954.
[19:13:33.86][PreBBV2.cmd]
[19:13:33.86][PreBBV2.cmd] --------------------------------------------------
[19:13:33.87][PreBBV2.cmd]
[19:13:33.87][PreBBV2.cmd] Check Error for PININST_BBV....
[19:13:33.94][ChkError.cmd] **************************************************
[19:13:33.94][ChkError.cmd] [C:\SYSTEM.SAV\ExitProc\ErrorChk\ChkError.cmd] has started...
[19:13:33.96][ChkError.cmd] --------------------------------------------------
[19:13:33.97][ChkError.cmd] Check SW Error...
[19:13:33.97][ChkError.cmd] --------------------------------------------------
[19:13:33.98][ChkError.cmd]
[19:13:33.99][ChkError.cmd] Create ["C:\system.sav\ChkError.cmd.FAILURE.flg"] file...
[19:13:34.00][ChkError.cmd]
[19:13:34.00][ChkError.cmd] Logfile [C:\system.sav\Logs\CheckLog\ChkErr_PASS2_BBV1.log]...
[19:13:34.00][ChkError.cmd]
[19:13:34.01][ChkError.cmd] Check 2nd parameter [PASS2AFTERBBV1]
[19:13:34.01][ChkError.cmd]
[19:13:34.03][ChkError.cmd] Error Checking items : [MEMDUMP,APPSLOG,TIMEOUT]
[19:13:34.03][ChkError.cmd] --------------------------------------------------
[19:13:34.03][ChkError.cmd] Checking : Memory Dump
[19:13:34.05][ChkError.cmd] Could not find memory dump...
[19:13:34.05][ChkError.cmd]
[19:13:34.06][ChkError.cmd] [DumpFile]
[19:13:34.07][ChkError.cmd] Result=PASSED
[19:13:34.07][ChkError.cmd] --------------------------------------------------
[19:13:34.08][ChkError.cmd] Checking : Apps' log
[19:13:34.09][ChkError.cmd]
[19:13:34.80][ChkError.cmd] [AppsLog]
[19:13:34.81][ChkError.cmd] Result=PASSED
[19:13:34.83][ChkError.cmd] --------------------------------------------------
[19:13:34.86][ChkError.cmd] Checking : Timeout in INSTALL.log
[19:13:34.87][ChkError.cmd]
[19:13:34.89][ChkError.cmd] Run [FIND.exe /I 'timeout with' C:\System.sav\Util\Install.log]
[19:13:35.01][ChkError.cmd] Run [FIND.exe /I 'timeout wait' C:\System.sav\Util\Install.log]
[19:13:35.12][ChkError.cmd] There is NO timeout in install.log file.
[19:13:35.15][ChkError.cmd]
[19:13:35.17][ChkError.cmd] [TIMEOUT]
[19:13:35.19][ChkError.cmd] Result=PASSED
[19:13:35.22][ChkError.cmd]
[19:13:35.23][ChkError.cmd] --------------------------------------------------
[19:13:35.25][ChkError.cmd] Delete ["C:\system.sav\ChkError.cmd.FAILURE.flg"] since no error detected...
[19:13:35.28][ChkError.cmd]
[19:13:35.30][ChkError.cmd] No SW issue found...
[19:13:35.31][ChkError.cmd]
[19:13:35.33][ChkError.cmd] --------------------------------------------------
[19:13:35.34][ChkError.cmd] [ChkError.cmd] has completed...
[19:13:35.37][ChkError.cmd] **************************************************
[19:13:35.40][PreBBV2.cmd]
[19:13:35.40][PreBBV2.cmd]
[19:13:35.40][PreBBV2.cmd] --------------------------------------------------
[19:13:35.42][PreBBV2.cmd] Disable Hibernation...
[19:13:35.42][PreBBV2.cmd] --------------------------------------------------
[19:13:35.42][PreBBV2.cmd]
Volume in drive C is Windows
Volume Serial Number is 2674-2E39

Directory of C:\

01/21/2020 07:13 PM 1,048,576,000 pagefile.sys
01/21/2020 07:13 PM 16,777,216 swapfile.sys
2 File(s) 1,065,353,216 bytes
0 Dir(s) 61,710,385,152 bytes free
[19:13:35.44][PreBBV2.cmd]
[19:13:35.44][PreBBV2.cmd] --------------------------------------------------
[19:13:35.45][PreBBV2.cmd]
[19:13:35.45][PreBBV2.cmd] --------------------------------------------------
[19:13:35.45][PreBBV2.cmd] Drive Space at BBV2.
[19:13:35.47][PreBBV2.cmd] --------------------------------------------------
[19:13:35.58][PreBBV2.cmd] --------------------------------------------------
[19:13:35.58][PreBBV2.cmd] Create RStone_BBV2.INI at BBV2.
[19:13:35.58][PreBBV2.cmd] --------------------------------------------------
[19:13:35.70][PreBBV2.cmd] FeatureByteBrandName from RStone.ini is Pavilion.
[19:13:35.72][PreBBV2.cmd]
[19:13:35.72][PreBBV2.cmd] Delete ["C:\system.sav\PreBBV2.cmd.FAILURE.flg"] because no error detected...
[19:13:35.73][PreBBV2.cmd] --------------------------------------------------
[19:13:35.73][PreBBV2.cmd] [PreBBV2.cmd] has completed...
[19:13:35.73][PreBBV2.cmd] **************************************************
[19:45:40.70][OA3OptInfo.cmd] **************************************************
[19:45:40.72][OA3OptInfo.cmd] [C:\SYSTEM.SAV\bbv\OA3OptInfo.cmd] has started...
[19:45:40.72][OA3OptInfo.cmd] --------------------------------------------------
[19:45:40.73][OA3OptInfo.cmd] Initialize the default value to set...
[19:45:40.75][OA3OptInfo.cmd] --------------------------------------------------
[19:45:40.81][OA3OptInfo.cmd]
[19:45:40.81][OA3OptInfo.cmd] Detect MS Office HP PN...
[19:45:40.83][OA3OptInfo.cmd]
[19:45:40.84][OA3OptInfo.cmd] Detect FORMFACTOR_CL1 and FORMFACTOR_CL2...
[19:45:40.90][OA3OptInfo.cmd] Found [#] mark in [2HL15AA#ABA]
[19:45:40.92][OA3OptInfo.cmd]
[19:45:40.94][OA3OptInfo.cmd] PRODNUM =[2HL15AA#ABA]
[19:45:40.94][OA3OptInfo.cmd] SKUNUMBER =[2HL15AA]
[19:45:40.95][OA3OptInfo.cmd] SKUOPTCFG =[ABA]
[19:45:40.95][OA3OptInfo.cmd] MODELSKU =[2HL15AA-ABA]
[19:45:40.97][OA3OptInfo.cmd] SYSID =[82F2]
[19:45:40.97][OA3OptInfo.cmd] MARKETNAME =[HP Pavilion Desktop PC 570-p0xx]
[19:45:40.98][OA3OptInfo.cmd]
[19:45:41.47][OA3OptInfo.cmd] Single FormFactor's FB was set... PASSED.
[19:45:41.48][OA3OptInfo.cmd] --------------------------------------------------
[19:45:41.48][OA3OptInfo.cmd] [OA3OptInfo.cmd] has completed...
[19:45:41.50][OA3OptInfo.cmd] **************************************************
[19:46:24.38][UpdModel.cmd] **************************************************
[19:46:24.38][UpdModel.cmd] [c:\SYSTEM.SAV\bbv\UpdModel.cmd] has started...
[19:46:24.39][UpdModel.cmd] --------------------------------------------------
[19:46:24.39][UpdModel.cmd] Check if MLGM is required.
[19:46:24.41][UpdModel.cmd] also, check if MLGM without 1st GS for RD.
[19:46:24.42][UpdModel.cmd] --------------------------------------------------
[19:46:24.42][UpdModel.cmd]
[19:46:24.49][UpdModel.cmd] --------------------------------------------------
[19:46:24.50][UpdModel.cmd] [UpdModel.cmd] has completed...
[19:46:24.50][UpdModel.cmd] **************************************************
[19:46:31.80][BBV2_EUE.cmd] **************************************************
[19:46:31.80][BBV2_EUE.cmd] [C:\SYSTEM.SAV\bbv\BBV2_EUE.cmd] has started...
[19:46:31.81][BBV2_EUE.cmd] --------------------------------------------------
[19:46:31.81][BBV2_EUE.cmd] Looking for *.cmd in [C:\system.sav\P2PP\BBV2.eue] folder...
[19:46:31.83][BBV2_EUE.cmd] --------------------------------------------------
[19:46:31.83][BBV2_EUE.cmd]
[19:46:31.85][BBV2_EUE.cmd]
[19:46:31.85][BBV2_EUE.cmd] All *.cmd in [C:\system.sav\P2PP\BBV2.eue] folder have been called.
[19:46:31.86][BBV2_EUE.cmd]
[19:46:31.86][BBV2_EUE.cmd] --------------------------------------------------
[19:46:31.88][BBV2_EUE.cmd] Error checking
[19:46:31.88][BBV2_EUE.cmd] Looking for *.log in [C:\system.sav\Logs\BB] folder...
[19:46:31.89][BBV2_EUE.cmd] --------------------------------------------------
[19:46:31.89][BBV2_EUE.cmd]
[19:46:31.91][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\CheckWithPrior.log] is found.
[19:46:31.94][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\CPUFlag.LOG] is found.
[19:46:31.96][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\CUST_WAV.LOG] is found.
[19:46:31.97][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\FU260181.log] is found.
[19:46:31.99][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\ImageDiag_EarlyStage.LOG] is found.
[19:46:32.02][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\ImgEnhDrvByFlg_PASS1_WIN.LOG] is found.
[19:46:32.03][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\ImgEnhDrvByFlg_PASS1_WPE.LOG] is found.
[19:46:32.05][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\ImgEnhDrvByFlg_PASS2_WIN.LOG] is found.
[19:46:32.06][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\Library_Apps.LOG] is found.
[19:46:32.10][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\Library_VC.LOG] is found.
[19:46:32.11][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\MSAppsOrder.LOG] is found.
[19:46:32.13][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\Ngen.LOG] is found.
[19:46:32.14][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\OCAMark.log] is found.
[19:46:32.16][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00A01B2.LOG] is found.
[19:46:32.17][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00EDUB2.LOG] is found.
[19:46:32.21][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00F6BB2.LOG] is found.
[19:46:32.22][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00H08B2.LOG] is found.
[19:46:32.24][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00HX7B2.LOG] is found.
[19:46:32.25][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00KGGB2.LOG] is found.
[19:46:32.28][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00KTXB2.LOG] is found.
[19:46:32.30][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00L6EB2.LOG] is found.
[19:46:32.31][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00LDMB2.LOG] is found.
[19:46:32.33][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00LEXB2.LOG] is found.
[19:46:32.35][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00LFWB2.LOG] is found.
[19:46:32.36][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00N20B2.LOG] is found.
[19:46:32.39][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00N24B2.LOG] is found.
[19:46:32.41][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00N89B2.LOG] is found.
[19:46:32.42][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00NBCB2.LOG] is found.
[19:46:32.44][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00NL0B2.LOG] is found.
[19:46:32.46][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00NY2B2.LOG] is found.
[19:46:32.49][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00NZ7B2.LOG] is found.
[19:46:32.50][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00P43B2.LOG] is found.
[19:46:32.52][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00P5S00.LOG] is found.
[19:46:32.53][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00P62B2.LOG] is found.
[19:46:32.55][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00PL3B2.LOG] is found.
[19:46:32.56][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00PT1B2.LOG] is found.
[19:46:32.60][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00PUTB2.LOG] is found.
[19:46:32.61][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00PVYB2.LOG] is found.
[19:46:32.63][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00PVZB2.LOG] is found.
[19:46:32.64][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00PW0B2.LOG] is found.
[19:46:32.66][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00PW2B2.LOG] is found.
[19:46:32.69][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00PW3B2.LOG] is found.
[19:46:32.71][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00PW5B2.LOG] is found.
[19:46:32.72][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00PWAB2.LOG] is found.
[19:46:32.74][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00PWGB2.LOG] is found.
[19:46:32.75][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00PWVB2.LOG] is found.
[19:46:32.77][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00PY6B2.LOG] is found.
[19:46:32.80][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00PZGB2.LOG] is found.
[19:46:32.81][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00Q1VB2.LOG] is found.
[19:46:32.83][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00Q4YB2.LOG] is found.
[19:46:32.85][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00Q9DB2.LOG] is found.
[19:46:32.86][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00QARB2.LOG] is found.
[19:46:32.89][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00QG0B2.LOG] is found.
[19:46:32.91][BBV2_EUE.cmd] [PIN_ERROR_MSG][BBV2_EUE.cmd] Found fail message in the C:\system.sav\Logs\BB\P00QG0B2.LOG
[19:46:32.91][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00QW2B2.LOG] is found.
[19:46:32.94][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00QWSB2.LOG] is found.
[19:46:32.96][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00QZUB2.LOG] is found.
[19:46:32.99][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\P00R7GB2.LOG] is found.
[19:46:33.00][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\WallpaperOk.log] is found.
[19:46:33.02][BBV2_EUE.cmd] [C:\system.sav\Logs\BB\WinPE_DRV.LOG] is found.
[19:46:33.03][BBV2_EUE.cmd] All *.log in [C:\system.sav\Logs\BB] folder has been scanned.
[19:46:33.05][BBV2_EUE.cmd] Create C:\system.sav\P2PP\BBV2.eue\BBV2.eue.don
[19:46:33.05][BBV2_EUE.cmd] --------------------------------------------------
[19:46:33.06][BBV2_EUE.cmd] [BBV2_EUE.cmd] has completed...
[19:46:33.06][BBV2_EUE.cmd] **************************************************
[19:47:36.46][PostPININST_BBV.cmd] **************************************************
[19:47:36.48][PostPININST_BBV.cmd] [C:\SYSTEM.SAV\bbv\PostPININST_BBV.cmd] has started...
[19:47:36.48][PostPININST_BBV.cmd] --------------------------------------------------
[19:47:36.49][PostPININST_BBV.cmd]
[19:47:36.49][PostPININST_BBV.cmd] Create FAILURE.flg for this batch file...
[19:47:36.51][PostPININST_BBV.cmd]
[19:47:36.53][PostPININST_BBV.cmd] Set UIA Error Code to 956.
[19:47:36.67][PostPININST_BBV.cmd]
[19:47:36.68][PostPININST_BBV.cmd] Delete ["C:\system.sav\PostPININST_BBV.cmd.FAILURE.flg"] file... since the command reached here...
[19:47:36.68][PostPININST_BBV.cmd] --------------------------------------------------
[19:47:36.70][PostPININST_BBV.cmd] [PostPININST_BBV.cmd] has completed...
[19:47:36.71][PostPININST_BBV.cmd] **************************************************
[19:49:55.33][ChkError.cmd] **************************************************
[19:49:55.34][ChkError.cmd] [C:\SYSTEM.SAV\ExitProc\ErrorChk\ChkError.cmd] has started...
[19:49:55.36][ChkError.cmd] --------------------------------------------------
[19:49:55.36][ChkError.cmd] Check SW Error...
[19:49:55.37][ChkError.cmd] --------------------------------------------------
[19:49:55.37][ChkError.cmd]
[19:49:55.37][ChkError.cmd] Create ["C:\system.sav\ChkError.cmd.FAILURE.flg"] file...
[19:49:55.39][ChkError.cmd]
[19:49:55.39][ChkError.cmd] Logfile [C:\system.sav\Logs\CheckLog\ChkErr_PASS2_BBVClean.log]...
[19:49:55.40][ChkError.cmd]
[19:49:55.40][ChkError.cmd] Check 2nd parameter [BBVClean]
[19:49:55.42][ChkError.cmd]
[19:49:55.42][ChkError.cmd] Error Checking items : [MEMDUMP,APPSLOG,REGDEV,TIMEOUT,WINSAT,FAILUREFLG]
[19:49:55.43][ChkError.cmd] --------------------------------------------------
[19:49:55.43][ChkError.cmd] Checking : Memory Dump
[19:49:55.45][ChkError.cmd] Could not find memory dump...
[19:49:55.45][ChkError.cmd]
[19:49:55.47][ChkError.cmd] [DumpFile]
[19:49:55.47][ChkError.cmd] Result=PASSED
[19:49:55.48][ChkError.cmd] --------------------------------------------------
[19:49:55.48][ChkError.cmd] Checking : Apps' log
[19:49:55.50][ChkError.cmd]
[19:49:57.00][ChkError.cmd] [AppsLog]
[19:49:57.01][ChkError.cmd] [PASS2_BBVClean][PIN_ERROR_MSG][ChkError.cmd] There are FAILED message in the C:\System.sav\Logs\PINPROC\BBApps.log
[19:49:57.04][ChkError.cmd] Result=FAILED
[19:49:57.06][ChkError.cmd] --------------------------------------------------
[19:49:57.09][ChkError.cmd] Checking : Yellow-Bang
[19:49:57.11][ChkError.cmd]
[19:49:57.14][ChkError.cmd] Run [PINChkT.exe /dev /s]
[19:49:57.54][ChkError.cmd]
[19:49:57.58][ChkError.cmd] Append [REGDEVT_PASS2_BBVClean.LOG] to [C:\system.sav\Logs\CheckLog\ChkErr_PASS2_BBVClean.log]...
[19:49:57.61][ChkError.cmd]
[19:49:57.62][ChkError.cmd] Run [FIND.exe /I 'Result=FAILED' C:\SYSTEM.SAV\Logs\PINPROC\REGDEVT_PASS2_BBVClean.LOG]
[19:49:57.65][ChkError.cmd] No Yellow-bang device found...
[19:49:57.68][ChkError.cmd] Result=PASSED
[19:49:57.70][ChkError.cmd]
[19:49:57.73][ChkError.cmd] --------------------------------------------------
[19:49:57.75][ChkError.cmd] Checking : Timeout in INSTALL.log
[19:49:57.78][ChkError.cmd]
[19:49:57.81][ChkError.cmd] Run [FIND.exe /I 'timeout with' C:\System.sav\Util\Install.log]
[19:49:58.00][ChkError.cmd] Run [FIND.exe /I 'timeout wait' C:\System.sav\Util\Install.log]
[19:49:58.17][ChkError.cmd] There is TIMEOUT in install.log file.
[19:49:58.18][ChkError.cmd]
[19:49:58.20][ChkError.cmd] [TIMEOUT]
[19:49:58.23][ChkError.cmd] Result=FAILED
[19:49:58.25][ChkError.cmd] --------------------------------------------------
[19:49:58.28][ChkError.cmd] Checking : WinSAT
[19:49:58.29][ChkError.cmd]
[19:49:58.31][ChkError.cmd] [WinSAT]
[19:49:58.34][ChkError.cmd] Result=PASSED
[19:49:58.37][ChkError.cmd] --------------------------------------------------
[19:49:58.39][ChkError.cmd] Checking : FAILURE.flg
[19:49:58.48][CheckFailureFlags.cmd] **************************************************
[19:49:58.50][CheckFailureFlags.cmd] [CheckFailureFlags.cmd] has started...
[19:49:58.50][CheckFailureFlags.cmd] --------------------------------------------------
[19:49:58.51][CheckFailureFlags.cmd] Check FAILURE.flg at [PASS2_BBVClean]
[19:49:58.51][CheckFailureFlags.cmd] --------------------------------------------------
[19:50:06.27][CheckFailureFlags.cmd] --------------------------------------------------
[19:50:06.27][CheckFailureFlags.cmd] Found FAILURE.flg in C:\SwSetup folder.
[19:50:06.27][CheckFailureFlags.cmd] Check C:\SYSTEM.SAV\FAILURE.FLG
[19:50:06.29][CheckFailureFlags.cmd] --------------------------------------------------
[19:50:06.29][CheckFailureFlags.cmd] --------------------------------------------------
[19:50:06.30][CheckFailureFlags.cmd] [CheckFailureFlags.cmd] has completed...
[19:50:06.30][CheckFailureFlags.cmd] **************************************************
[19:50:06.32][ChkError.cmd]
[19:50:06.35][ChkError.cmd] [FAILURE_FLAG]
[19:50:06.36][ChkError.cmd] [PASS2_BBVClean][PIN_ERROR_MSG][ChkError.cmd] Found C:\SYSTEM.SAV\FAILURE.FLG
[19:50:06.40][ChkError.cmd] Result=FAILED
[19:50:06.41][ChkError.cmd]
[19:50:06.44][ChkError.cmd] --------------------------------------------------
[19:50:06.46][ChkError.cmd] Some error detected...
[19:50:06.49][ChkError.cmd]
[19:50:06.50][ChkError.cmd] --------------------------------------------------
[19:50:06.54][ChkError.cmd] [C:\SYSTEM.SAV\ExitProc\ErrorChk\ChkError.cmd]
[19:50:06.55][ChkError.cmd] [PASS2_BBVClean][PIN_ERROR_MSG][ChkError.cmd] found [3] SW issue[s]...
[19:50:06.58][ChkError.cmd] --------------------------------------------------
[19:50:06.60][ChkError.cmd] [PASS2_BBVClean][PIN_ERROR_MSG][ChkError.cmd] Refer the following file[s] if exists to see detail.
[19:50:06.63][ChkError.cmd] [PASS2_BBVClean][PIN_ERROR_MSG][ChkError.cmd] C:\CTOERROR.flg , C:\System.sav\*FAILURE.flg, or C:\system.sav\Logs\AllFailure.log
[19:50:06.65][ChkError.cmd]
[19:50:06.66][ChkError.cmd] --------------------------------------------------
[19:50:06.69][ChkError.cmd]
[19:50:06.71][ChkError.cmd] This is for customer image...
[19:50:06.72][ChkError.cmd]
[19:50:06.75][ChkError.cmd] Trigger CTO panic...
[19:50:06.85][DumpBCD.cmd] **************************************************
[19:50:06.85][DumpBCD.cmd] [C:\SYSTEM.SAV\ExitProc\DataColl\DumpBCD.cmd] has started...
[19:50:06.87][DumpBCD.cmd] --------------------------------------------------
[19:50:06.87][DumpBCD.cmd] STAGE : [DISABLE_SB_CMD]
[19:50:06.87][DumpBCD.cmd] Dump BCD...
[19:50:06.89][DumpBCD.cmd] --------------------------------------------------
[19:50:06.90][DumpBCD.cmd]
[19:50:06.90][DumpBCD.cmd]
[19:50:07.36][DumpBCD.cmd]
[19:50:07.36][DumpBCD.cmd] --------------------------------------------------
[19:50:07.38][DumpBCD.cmd] [DumpBCD.cmd] has completed...
[19:50:07.38][DumpBCD.cmd] **************************************************
[19:50:07.48][DisableSB.cmd] **************************************************
[19:50:07.48][DisableSB.cmd] [C:\SYSTEM.SAV\ExitProc\DisableSB.cmd] has started...
[19:50:07.50][DisableSB.cmd] --------------------------------------------------
[19:50:07.50][DisableSB.cmd] No [C:\system.sav\Exclude\BiosConfig] folder ...
[19:50:07.51][DisableSB.cmd] --------------------------------------------------
[19:50:07.51][DisableSB.cmd] [DisableSB.cmd] has completed...
[19:50:07.51][DisableSB.cmd] **************************************************
[19:50:08.51][DrvLtr2ESP.cmd] **************************************************
[19:50:08.51][DrvLtr2ESP.cmd] [C:\SYSTEM.SAV\ExitProc\DrvLtr2ESP.cmd] has started...
[19:50:08.51][DrvLtr2ESP.cmd] --------------------------------------------------
[19:50:08.53][DrvLtr2ESP.cmd] Create ["C:\system.sav\DrvLtr2ESP.cmd.FAILURE.flg"] file...
[19:50:08.53][DrvLtr2ESP.cmd]
[19:50:08.54][DrvLtr2ESP.cmd]
[19:50:08.54][DrvLtr2ESP.cmd] Detect ESP partition index...
[19:50:08.54][DrvLtr2ESP.cmd]
[19:50:08.64][DrvLtr2ESP.cmd] ESP partition index = [1]
[19:50:08.65][DrvLtr2ESP.cmd] ESP drive letter = [NONE]
[19:50:08.65][DrvLtr2ESP.cmd]
[19:50:08.67][DrvLtr2ESP.cmd] Assign drive letter to ESP...
[19:50:08.67][DrvLtr2ESP.cmd]

Microsoft DiskPart version 10.0.15063.0

Copyright (C) Microsoft Corporation.
On computer: 7QBDMJ7MU2IMM

Volume 1 is the selected volume.

Partition 1 is now the selected partition.

Partition ### Type Size Offset
------------- ---------------- ------- -------
* Partition 1 System 260 MB 1024 KB
Partition 2 Reserved 16 MB 261 MB
Partition 3 Primary 90 GB 277 MB
Partition 4 Primary 1000 MB 90 GB

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 0 G DVD-ROM 0 B No Media
Volume 1 C Windows NTFS Partition 90 GB Healthy Boot
Volume 2 D BP FAT32 Partition 1000 MB Healthy
* Volume 3 FAT32 Partition 260 MB Healthy System
Volume 4 E DATA NTFS Partition 931 GB Healthy

DiskPart successfully assigned the drive letter or mount point.

Partition ### Type Size Offset
------------- ---------------- ------- -------
* Partition 1 System 260 MB 1024 KB
Partition 2 Reserved 16 MB 261 MB
Partition 3 Primary 90 GB 277 MB
Partition 4 Primary 1000 MB 90 GB

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 0 G DVD-ROM 0 B No Media
Volume 1 C Windows NTFS Partition 90 GB Healthy Boot
Volume 2 D BP FAT32 Partition 1000 MB Healthy
* Volume 3 S FAT32 Partition 260 MB Healthy System
Volume 4 E DATA NTFS Partition 931 GB Healthy
[19:50:10.16][DrvLtr2ESP.cmd] Succeed in assigning drive letter to ESP
[19:50:10.18][DrvLtr2ESP.cmd] Delete ["C:\system.sav\DrvLtr2ESP.cmd.FAILURE.flg"] file since no errors detected...
[19:50:10.19][DrvLtr2ESP.cmd] --------------------------------------------------
[19:50:10.19][DrvLtr2ESP.cmd] [DrvLtr2ESP.cmd] has completed...
[19:50:10.21][DrvLtr2ESP.cmd] **************************************************
[19:50:34.41][ChkError.cmd]
[19:50:34.41][ChkError.cmd] --------------------------------------------------
[19:50:34.42][ChkError.cmd] [ChkError.cmd] has completed...
[19:50:34.42][ChkError.cmd] **************************************************

3 REPLIES 3
Grzwacz
Level 12
Level 12
6,774 6,758 638 1,525
Message 2 of 4
Flag Post
HP Recommended

Greetings,

Welcome to the forum.

I am not a HP employee.

 

A HP software programmer would have to review this log. Don't think anybody in this Forum can analyze the log file to your satisfaction. I do see some failed operations in your log but have no idea why this is happening.

 

I would try doing a clean W10 install using this Microsoft site (Link).

 

You may lose some HP software but you should be able to use your PC.

 

Regards

0 Kudos
Larry_p
Author
New member
2 1 0 0
Message 3 of 4
Flag Post
HP Recommended

Thanks Grzwacz. I was able to install Windows with the link provided. Do I need to recover the HP software that is no longer installed? I'm not sure what was on there as this is my sisters PC. She is definetely not a power user and I  doubt she knows what was there.

0 Kudos
Grzwacz
Level 12
Level 12
6,774 6,758 638 1,525
Message 4 of 4
Flag Post
HP Recommended

Hi Larry_p,

 

You're very welcome.

 

You may have lost some HP software included in the HP Recovery media but not included when using Microsoft installation media.

 

Some of the missing software may be at this site (Link).

 

You can also order HP Recovery media at this site if you cannot find all software your sister may need. You might be able to do a HP install using the HP Recovery media at this site to get all software HP included in the factory image.

 

Regards

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation