cancel
Showing results for 
Search instead for 
Did you mean: 
KGreave0
New member
3 0 0 0
Message 1 of 2
1,893
Flag Post

HP Workstation Boot up Problem

HP Recommended
HP/Compaq Pro 6200 Workstation
Microsoft Windows 10 (64-bit)

Hello, I have a problem that I have been trying to fix for a while. I bought a refurbished Workstation. The workstation is an HP/Compaq Pro 6200.  Whenever I start the computer the fans spin up to the max. No input is displayed on the monitor.  The HDD LED does not turn on. After exactly a minute the fans spin down to normal, The HDD LED is lit, and input is displayed in the monitor. I tried switching out the RAM for new RAM. It did not work. I'm wondering if it could be the motherboard or the PSU. If it was the motherboard shouldn't there be more problems arising than just powering on? Everything works after it powers on normally. The only other problem is the two bottom front USB ports do not function at all. The top two work. I'm thinking it is a faulty USB hub. Now If the two bottom ports do not work shouldn't the other two not work as well? If someone could help me out that would be great.

Thanks

1 REPLY 1
Lil_Boy_Blue
Level 12
7,692 7,654 332 706
Message 2 of 2
Flag Post
HP Recommended

Hi

I would not rule out the CPU.

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation