HP Z2 Tower G9 Workstation (5F163EA) trying to image with clonezilla and disk not being recognized

[Sean_dwane]

I am trying to write a clonezilla image to an M.2 and I get the following error message.

"Error! No existing disk(s) or no unmounted disk(s) are found! To use Clonezilla to save or clone to a disk, the source disk must exist or be unmounted! If you are sure the disk exists in this machine, maybe the kernel is too old?"

[Paul_Tikkanen]

You will have to contact Cloneziilla to see if they have a patch.

You need the Intel storage controller driver that I zipped up and attached below to install Windows on your PC.

The attached file is good for both W10 & W11.

Copy all of the files in both folders in the attached file to a USB flash drive.

Have the flash drive and your Windows installation media plugged into USB ports.

Boot from the W10/W11 installation flash drive.

When you get to the screen where no drives can be found, click on the Load driver option, browse to the flash drive with the storage controller drivers on it.

If you check the box, it will only include the compatible driver.

Click Next and if those are the right drivers Windows should find the drive and install.