How to fix bleeping noise on a HP All-in-One - 22-b013w

[Charmy1]

URGENT!

 HELP!

HOW TO EASILY FIX bleeping noise on a HP All-in-One - 22-b013w

If my momma finds out im in huge trouble,please help

[Jeet_singh]

@Charmy1,

Thank you for posting your query on HP Community,

Have you recently made any software or hardware changes on the PC before the issue started?

Does the PC shutdown due to overheating?

Have you made a note of the pattern it makes a beep sound. 

In the meantime, let's try these steps here: 

Many startup errors and other problems can be resolved by decreasing the amount of power stored in hardware components. Decreasing stored power is sometimes referred to as a "Hard Reset". Use the following steps to perform a hard reset on a computer:

1. If Windows is open, click Start and then Shutdown.

If Windows is not open and the computer has power, press and hold the power button on the computer until the computer shuts off.

2. With the power off, disconnect the power cord from the back of the computer.

3. With the power off and the power cord disconnected, press the power button on the computer for 5 seconds. The power light indicator on or near the power button might turn on briefly but then go out.

4. Reconnect the power cord and turn on the power.

Alternatively, you may refer to this support document for - HP and Compaq Desktop PCs - BIOS Beep Codes

Let me know how it goes for further assistance. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!