-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
Create an account on the HP Community to personalize your profile and ask a question
Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more.
Check out our WINDOWS 11 Support Center info about: OPTIMIZATION, KNOWN ISSUES, FAQs, VIDEOS AND MORE.
It has been a while since anyone has replied. Simply ask a new question if you would like to start the discussion again.
1
0
0
HP Recommended
1 ACCEPTED SOLUTION
Accepted Solutions
HP Recommended
Welcome to our HP Community Forum!
Yes, you can upgrade your HP ProDesk 600 G1 Tower to an RX 580 8GB graphics card -which requires a 500-watt power supply upgrade equipped with one 8-pin PCIe power cable.
Best way of doing this is to use a special power adapter, which looks something like this:
This "24 Pin to 6 Pin ATX Power Adapter" cable can replace your proprietary power supply with an industry standard ATX power supply. You'll have to look at the ATX's dimensions (LxWxH) for fit inside your case, but since you got the Tower model, there should be ample room to make an ATX power supply fit. You can easily purchase these power adapter cables online, such as via AliExpress.
What you should be looking for is an adapter cable which specifically references your HP ProDesk 600 G1, such as this Amazon-US link purchase example: Amazon.com: YEZriler 24 Pin to 6 Pin ATX Power Adapter Sleeved Cable for HP Z200 Z230 4300 6080 8080....
Hope this was helpful.
Kind Regards,
NonSequitur777
HP Recommended
Welcome to our HP Community Forum!
Yes, you can upgrade your HP ProDesk 600 G1 Tower to an RX 580 8GB graphics card -which requires a 500-watt power supply upgrade equipped with one 8-pin PCIe power cable.
Best way of doing this is to use a special power adapter, which looks something like this:
This "24 Pin to 6 Pin ATX Power Adapter" cable can replace your proprietary power supply with an industry standard ATX power supply. You'll have to look at the ATX's dimensions (LxWxH) for fit inside your case, but since you got the Tower model, there should be ample room to make an ATX power supply fit. You can easily purchase these power adapter cables online, such as via AliExpress.
What you should be looking for is an adapter cable which specifically references your HP ProDesk 600 G1, such as this Amazon-US link purchase example: Amazon.com: YEZriler 24 Pin to 6 Pin ATX Power Adapter Sleeved Cable for HP Z200 Z230 4300 6080 8080....
Hope this was helpful.
Kind Regards,
NonSequitur777
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for?
Ask the community