-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Operating Systems and Recovery
- Missing BSD drivers on Proliant ML110 Gen 9

Create an account on the HP Community to personalize your profile and ask a question
05-20-2021
01:46 AM
- last edited on
05-20-2021
05:04 AM
by
BiancaS
I am chasing details of two BSDs for a W2012ServerR2 powered Proliant ML110 Gen 9. The first missing driver is for PCI\VEN_103C&DEV_3306&SUBSYS_3381103C&REV_06. The second is PCI\VEN_103C&DEV_3307&SUBSYS_3381103C&REV_06. My basic reading is that these relate to the ILO (iLO4 in my case). Any helpful sites or advice to [Personal Information Removed]
Solved! Go to Solution.
Accepted Solutions
05-20-2021 07:16 AM
Hi:
I have zipped up and attached the drivers you need for those devices, below.
You will need to manually install the drivers.
Download and unzip the files to their folders. Do not do anything with the files in the folders.
The cp017930 file is for PCI\VEN_103C&DEV_3307
The cp029429 is for PCI\VEN_103C&DEV_3306
Here is how to manually install the first one (3307):
Go to the device manager. Click on the PCI\VEN_103C&DEV_3307 device needing the driver.
Click on the driver tab. Click on Update driver.
Select the Browse my computer for drivers option, and browse to the cp017930 folder you unzipped.
Make sure the Include Subfolders box is checked and the driver should install.
Then repeat the same process for 3306 but browse to the unzipped cp029429 folder.
05-20-2021 07:16 AM
Hi:
I have zipped up and attached the drivers you need for those devices, below.
You will need to manually install the drivers.
Download and unzip the files to their folders. Do not do anything with the files in the folders.
The cp017930 file is for PCI\VEN_103C&DEV_3307
The cp029429 is for PCI\VEN_103C&DEV_3306
Here is how to manually install the first one (3307):
Go to the device manager. Click on the PCI\VEN_103C&DEV_3307 device needing the driver.
Click on the driver tab. Click on Update driver.
Select the Browse my computer for drivers option, and browse to the cp017930 folder you unzipped.
Make sure the Include Subfolders box is checked and the driver should install.
Then repeat the same process for 3306 but browse to the unzipped cp029429 folder.