Showing results for 
Search instead for 
Did you mean: 
The HP Calculator Community Message Board is moving. While we prepare for the move, we are unable to accept new postings. During the move, you can look for help from other users by visiting . Or if you need technical support for your calculator visit: HP Calculators. .
New member
1 0 0 0
Message 1 of 2
Flag Post

My mouse and keyboard not working on startup

HP Recommended
Intel core 2 due E8400 Hp
Microsoft Windows 10 (64-bit)
Hi I'm Hilal from Pakistan 🇵🇰 I have issue of mouse and keyboard not working on startup after reset the pc When its starts mouse and keyboard light shows and then startup screen shows up Mouse and keyboard not working totally lights off
Level 16
Level 16
34,049 26,486 3,092 6,659
Message 2 of 2
Flag Post
HP Recommended


The two important questions here are WHY did you reset the PC and HOW did you do that?


The problem you are facing is that you have to run diagnostics to determine the issue and without a working keyboard, you can't even do that.  So, at present, your PC is basically unusable.


What you need to consider is a complete reinstall of Windows to get it working again.


If you're faced with reinstalling Windows 10 onto your PC, there are several options, not all of which necessarily will be available to you:
1) Factory reset using internal HP image
2) Factory reset using external HP image you make
3) Factory reset using external HP image you buy
4) Windows reinstall using media you make

Each of these is discussed in some detail below ...

---------- Factory reset using internal HP image ----------
HP preloads most PCs with a compressed Windows Image that can be used to completely restore the PC to its original condition. This image is contained in the Recovery partition, and if it is intact, it will generally work well.

To do this, you press the Esc key repeatedly while rebooting and when the HP Startup Menu appears, you select the option to do the reset -- usually F11. This will take a couple of hours or more to complete and when done, your PC will start over with initial setup screens. That means that EVERYTHING previously on your PC will have been erased: accounts, settings, personal data, applications, drivers.

NOTE that the disk drive has to be in excellent condition or this will fail. So, BEFORE you do this, instead of pressing F11 as above, press F2 to run diagnostics. If the disk test passes, you should be able to run the reset.

---------- Factory reset using external HP image you make ----------
HP provides a Cloud Recovery tool that you can use, together with a 32GB USB stick, to create your on HP reset media.

Here is the link:

This works the same as the factory reset described above.

---------- Factory reset using external HP image you buy ----------
For those PCs not supported by the Cloud Recovery, in some cases, HP offers Recover Media for sale. This can not be downloaded; instead, it must be ordered from HP.

HP Recovery Media is a set of DVDs and a CD, or USB stick, that will erase the hard drive (removing all data, settings, and applications, reinstall the original OS, drivers, and some HP Utilities.

In some cases, you may be able to order a USB stick instead of disks.

You can look online for Recovery Media starting with the linked paged:

Once there, input your Product name or number. On your Software and Drivers Download page, select your Operating System and and Version. Click &quot;Update&quot;.<br><br>If HP Recovery Media is available for your machine, down near the bottom of the page, you will see an entry for Order Recovery Media-CD/DVD/USB. Click the &quot;+&quot; symbol to expand that entry and click on Order Media for details.

Or, if you prefer, you can do the same by contacting HP Customer Support.

HP contact info:

If HP no longer carries the media you need, another site you should check for HP Recovery Media is:

These work the same as the factory reset described above.

---------- Windows reinstall using media you make ----------
If there is no HP recovery media and Cloud Recovery is not an option, then your only option is to creating your own media using the Microsoft Media Creation Tool (MCT).

Use this link to download and create that media:

You may see the option to download an ISO file or create media; choose the option to create media. This will take a while because it has to download over 4GB of data and then has to format and create installation media from those files.

Insert that media into your PC, boot from it, and run through the installation. When you get the window asking for a product key, look down near the bottom of the window for the link you can click to skip that step.

When done (the PC will restart several times), you boot into Windows and you get back online, it will contact the MS activation servers and automatically reactivate Win10.



***If my post helped, click the thumbs-up symbol to say thanks***

***Please mark Accept As Solution if my post solved your problem***

I am a volunteer and I do not work for, nor represent, HP
Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation