Need to find a driver for a HP Proliant DL380 G5 SCSI Controller driver for a Windows 2016 Server.

[MeNoUnderTang]

I cannot find the correct specs that I need for categorization on this board but I need this for a Windows 2016 server that is sitting on a Proliant DL380 G5.  It is for a SCSI Controller. I am not having much luck finding it. Any assistance is appreciated.

THX

[Paul_Tikkanen]

Hi:

You may also want to post your question on the HPE Community Support Forum -- DL Servers section...

https://community.hpe.com/t5/ProLiant-Servers-ML-DL-SL/bd-p/itrc-264#.WfDp4WaWzGg

Hint:  You can usually find the driver you are looking for by googling the hardware ID for the device that needs a driver.

Use this guide for how to find the hardware ID for a device that is missing a driver...

https://www.howtogeek.com/193798/how-to-find-drivers-for-unknown-devices-in-the-device-manager/

[MeNoUnderTang]

Many thanks for pointing me in the right direction. I will dig around and post there as well. Thank you kindly!

[MeNoUnderTang]

Here is what I got as far as the HW ID's were concerned, but How do I know which is correct?

THX

PCI\VEN_1000&DEV_0030&SUBSYS_322A103C&REV_C1
PCI\VEN_1000&DEV_0030&SUBSYS_322A103C
PCI\VEN_1000&DEV_0030&CC_010000
PCI\VEN_1000&DEV_0030&CC_0100

[Paul_Tikkanen]

You're very welcome.

You can use any of the hardware ID's.  The first is the most specific, but the others are OK to use as well.

That device decodes to a HP LSI Logic PCI-X Ultra320 SCSI Host Adapter.

That's the best I can do for you.