cancel
Showing results for 
Search instead for 
Did you mean: 
Gman2020
New member
2 1 0 0
Message 1 of 4
364
Flag Post

Solved!

New hP 590-P0100NA Desktop failure to boot

HP Recommended
HP Pavilion 590-P0100NA
Microsoft Windows 10 (64-bit)

Just bought a new desktop HP Pavilion 590-P0100NA (with Optane) and was loading new Epson XP520 printer drivers when it began to "hang" for almost 1hr during the driver installation. I thought that rebooting the pc would resolve the issue, but it didn't.

 

Instead when I switch it on I would hear the HDD turning, but I would have just a black/blank screen. No boot-up logo, nothing. The monitor remains in standby mode.

 

I have tried from power off to boot up into Safe Mode by:

 

- Holding F8

- Holding Ctrl + F8 

- holding shift key

- Repeatedly forced shut-down/boot-up with no change

 

This has happened prior to having the opportunity to create a recovery pen drive. Any help please.

1 ACCEPTED SOLUTION

Accepted Solutions
Fanordi
Level 12
996 991 108 193
Message 2 of 4
Flag Post
HP Recommended

Hello, you can try to make an hardware reset. For this you need to unplug your AC adapter, and your PC's battery if removable, and press during 30 seconds Power button with any power. 

 

After this, please replug your PC and retry to start. If you have any screen, please check if you have blinking LED on your Power logo or caps lock key. 

If I have been answer to your question please accept it as a solution 🙂
I am Expert from French Community, and I am doing my best to help you with your question.

View solution in original post

3 REPLIES 3
Fanordi
Level 12
996 991 108 193
Message 2 of 4
Flag Post
HP Recommended

Hello, you can try to make an hardware reset. For this you need to unplug your AC adapter, and your PC's battery if removable, and press during 30 seconds Power button with any power. 

 

After this, please replug your PC and retry to start. If you have any screen, please check if you have blinking LED on your Power logo or caps lock key. 

If I have been answer to your question please accept it as a solution 🙂
I am Expert from French Community, and I am doing my best to help you with your question.

View solution in original post

Lil_Boy_Blue
Level 12
7,692 7,654 332 704
Message 3 of 4
Flag Post
HP Recommended

Hi

To supplement Fanordi 's answer...


First:- Turn off the computer, press and hold the PWR button for 4 seconds.

Then - Leave only keyboard and mouse connected, disconnect all externally connected
devices such as Docking Station, USB storage devices, displays, and printers.
Unplug the AC adapter from the computer.

Next - Press and Hold the Power button for 15 seconds to Hard Reset.
Rinse and Repeat; Re-Connect the AC adapter.

NOW begin checking/testing/proving the Hardware is fit for purpose.
Power on your PC, press ESC (repeatedly), then F2 at the prompt.
Choose System Tests (Fast Test does a 4 minute hardware check).

 

At he first opportunity create a bootable USB form here....

https://www.microsoft.com/en-us/software-download/windows10

 

and an alternate is...

From 2016 onwards there is a possible recovery option via the cloud...
HP Consumer PCs - Using the HP Cloud Recovery Tool (Windows 7 & 10)
https://support.hp.com/us-en/document/c06162205

 

If in doubt please ask.

Gman2020
Author
New member
2 1 0 0
Message 4 of 4
Flag Post
HP Recommended

Just got back home after work and did as instructed and it worked. Many thanks.

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation