cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents and videos on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
The HP Calculator Community Message Board is moving. While we prepare for the move, we are unable to accept new postings. During the move, you can look for help from other users by visiting https://www.hpmuseum.org/ . Or if you need technical support for your calculator visit: HP Calculators. .
roddy56
New member
1 0 0 0
Message 1 of 2
623
Flag Post

Pavilion 23 really odd problem windows 10

HP Recommended
Example: Pavilion 23
Microsoft Windows 10 (64-bit)

After loading clean version of window 10 after 5 minutes and 15 seconds .. l get 4 BEEPS THEN BLACK SCREEN  and back to desk top but now the computer pauses and freezes every 3 seconds for 1 second and a old desktop picture some comes back...tried everything l can find but doesn't work..help please

1 REPLY 1
WAWood
Level 16
Level 16
34,600 27,036 3,123 6,756
Message 2 of 2
Flag Post
HP Recommended

@roddy56 

Given the date of your post, I would have expected someone to respond to it before this -- but since that has not happened, I will take a shot at it ...

Looking at your model number, the first thing I noticed is that it is an All-in-One -- which in reality are really BIG laptops but with external mice and keyboards.  This is critical because you should only be using the HP OEM version of Windows on these PCs -- since installing your own version removes the drivers critical to it working properly.  Installing a different OS will NOT come with the HP drivers and that pretty much guarantees that the PC will not work properly.

 

You need to do a factory reset using HP media.

 

Here are the following ways to accomplish a factory reset:
1) Factory reset using internal HP image
2) Factory reset using external HP image you make
3) Factory reset using external HP image you buy

Each of these is discussed in some detail below ...

---------- Factory reset using internal HP image ----------
HP preloads most PCs with a compressed Windows Image that can be used to completely restore the PC to its original condition. This image is contained in the Recovery partition, and if it is intact, it will generally work well.

To do this, you press the Esc key repeatedly while rebooting and when the HP Startup Menu appears, you select the option to do the reset -- usually F11. This will take a couple of hours or more to complete and when done, your PC will start over with initial setup screens. That means that EVERYTHING previously on your PC will have been erased: accounts, settings, personal data, applications, drivers.

NOTE that the disk drive has to be in excellent condition or this will fail. So, BEFORE you do this, instead of pressing F11 as above, press F2 to run diagnostics. If the disk test passes, you should be able to run the reset.

---------- Factory reset using external HP image you make ----------
HP provides a Cloud Recovery tool that you can use, together with a 32GB USB stick, to create your on HP reset media.

Here is the link: https://support.hp.com/us-en/document/c06162205

This works the same as the factory reset described above.

---------- Factory reset using external HP image you buy ----------
For those PCs not supported by the Cloud Recovery, in some cases, HP offers Recover Media for sale. This can not be downloaded; instead, it must be ordered from HP.

HP Recovery Media is a set of DVDs and a CD, or USB stick, that will erase the hard drive (removing all data, settings, and applications, reinstall the original OS, drivers, and some HP Utilities.

In some cases, you may be able to order a USB stick instead of disks.

You can look online for Recovery Media starting with the linked paged: http://support.hp.com/us-en/drivers

Once there, input your Product name or number. On your Software and Drivers Download page, select your Operating System and and Version. Click &quot;Update&quot;.<br><br>If HP Recovery Media is available for your machine, down near the bottom of the page, you will see an entry for Order Recovery Media-CD/DVD/USB. Click the &quot;+&quot; symbol to expand that entry and click on Order Media for details.

Or, if you prefer, you can do the same by contacting HP Customer Support.

HP contact info: https://support.hp.com/us-en/contact-hp?openCLC=true

If HP no longer carries the media you need, another site you should check for HP Recovery Media is: http://www.computersurgeons.com/

These work the same as the factory reset described above.



I am a volunteer and I do not work for, nor represent, HP
Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation