-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Operating Systems and Recovery
- SSD Not detected HP All-in-One 22-df1010ur when trying to in...

Create an account on the HP Community to personalize your profile and ask a question
12-02-2021 06:00 PM
@TuMko -- after installing Windows 10, install the HP Support Assistant. It will determine which device-drivers that should be downloaded & installed.
There have been a few posts on this discussion forum about HP motherboards not detecting a specific manufacturer's SSD. Have you tried a SSD from a different company?
If you connect the SSD to a different computer, does the computer detect it, when first powering-on?
12-02-2021 08:15 PM
Hi, @TuMko
There is a special process needed to install W10 on PC's with the new Intel 11th gen core processors...
See the info at the link below.
Here is the link to the driver you need...
This package contains the Intel Rapid Storage Technology Driver for the supported notebook models and operating systems. The Intel Rapid Storage Technology is designed to provide functionality for the Intel Storage Controllers. The driver improves Serial ATA (SATA) disk performance with Native Command Queuing.
https://ftp.hp.com/pub/softpaq/sp111501-112000/sp111776.exe
There is one thing wrong in that document, and that is where HP tells you to right click on the Intel driver file and select Extract to
When I ran through the steps, I don't get an Extract to option when I right click on the file.
So, if you have the same issue, download and install the free 7-zip file utility from the link below.
The 2nd file at the top of the page is for 64 bit.
Then you can right click on the exe file, select 7-Zip from the menu, and select Extract to: and let it extract the file into its folder name (sp111776), and copy that folder to your USB flash drive, and continue with the instructions.