-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Operating Systems and Recovery
- Successful Solution to update z840 TPM to 2.0

Create an account on the HP Community to personalize your profile and ask a question
08-26-2023
05:23 AM
- last edited on
07-15-2025
07:55 AM
by
Raj_05
Hello all,
If like myself you have read a lot of posts on this board but found no immediate solution, here's a proven solution to upgrade the z840 (and possibly z240, z440, z640) from TPM 1.2 to TPM 2.0.
My workstation refused to update the TPM as the update instructions are incorrect.
The latest BIOS version does not allow the TPM to update. I.E. do not follow the instruction to update to latest BIOS prior to flashing the TPM. The TPMConfig software will set the 2.0 firmware and reboot, but no TPM firmware flash will occur.
An older BIOS version is required.
- Obtain BIOS revision v02.54 (06/12/2020). This is contained in SP104013. (https://ftp.hp.com/pub/softpaq/sp104001-104500/sp104013.exe )
- Flash the BIOS.
- Obtain the TPM Update software. This is contained in SP87753. (https://ftp.hp.com/pub/softpaq/sp87501-88000/sp87753.exe) ref: https://support.hp.com/us-en/document/c05806110
- Run TPMConfig to update the TPM, selecting the 2.0 version
- Update your BIOS again to the latest version from the support site.
Kind regards,
Jez