• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Check out our WINDOWS 11 Support Center info about: OPTIMIZATION, KNOWN ISSUES, FAQs, VIDEOS AND MORE.
HP Recommended
EliteDesk 800 G1 SFF
Microsoft Windows 10 (64-bit)

So far I managed to upgrade the TPM 1.2 Manufacturer Version from 4.32 to 4.34 and I updated the BIOS from 2.72 to 2.77 but I seem to be at a standstill as I cannot find the correct utility to upgrade from manufacturer version 4.32. The following page doesn't list the G1 --> (https://support.hp.com/us-en/document/c05381064) and it only references the Manufacturer Version 6.40 or 6.41, but I can't find anything to upgrade from 4.34 to 6.40 or 6.41. Is the G1 even able to upgrade? I read that Win 11 can run on 1.2, but I'm not sure if that's Manufacturer 4.34 or 6.40.

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

Nevermind... Just ran PC health check and just learned my processor isn't even compatible... Intel Core i7-4770 CPU @3.40GHz... So I just wasted 3 hours of my time... smh....

View solution in original post

2 REPLIES 2
HP Recommended

Nevermind... Just ran PC health check and just learned my processor isn't even compatible... Intel Core i7-4770 CPU @3.40GHz... So I just wasted 3 hours of my time... smh....

HP Recommended

Hi:

 

If you want to install W11 on your PC as is, you can bypass the W11 hardware requirements using two easy methods.  The first one is the easiest.

 

I would make a system image of your current W10 installation prior to updating to W11, so you can easily reinstall W10 in the future.  I used the free Macrium Reflect software to do that, under the Backup at Home section. 

 

Along with the system image, make sure you create the bootable DVD or USB rescue drive you boot from to access the system image stored on your portable hard drive.

 

Macrium Software | Reflect Free Edition

 

Read and follow the instructions at the link below.

 

Windows 11 Upgrade Hack on Any Hardware | Dong Knows Tech

 

No registry changes needed.  No need to create installation media.  Just download the W11 ISO file, and the guy's zip file.

 

I used the first procedure last Saturday to do an in-place upgrade an old HP Elitebook 6930p notebook made in 2010 to W11, and I was able to keep my old Office 2010 Starter program that came with the notebook when it had W7 on it, along with all of my other programs, files and settings.

 

The notebook met none of the enhanced W11 hardware requirements.

 

That is the 9th unsupported W11 PC I have upgraded to W11, and not one of them have had any issues whatsoever.

 

They have all gotten all the Windows 11 updates released thus far.

 

I check those against a PC I have that is fully supported to run W11.

 

There is also this way you can upgrade to W11, bypassing the hardware checks...

 

https://www.youtube.com/watch?v=02mgrA51974 

 

How to upgrade to Windows 11 for unsupported hardware Windows 11 https://amzn.to/3kMVTed Amazon Basics Wall Charger https://amzn.to/3OUNwtr iPhone Charger, USB C and USB https://amzn.to/3OqBKFl 0:00 Introduction 0:13 Download Windows 10 Disk Image (ISO) 0:54 Download Windows 11 Disk Image (ISO) ...
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.