-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Operating Systems and Recovery
- camera driver is not sowing

Create an account on the HP Community to personalize your profile and ask a question
11-14-2026 08:29 AM
I need help restoring my internal webcam on my Victus by HP Gaming Laptop 15-fb0xxx (Windows 11 64-bit, BIOS AMI F.26, AMD platform). After the camera was uninstalled through Device Manager, it completely disappeared from the system: the Camera category is gone, "Show hidden devices" does not reveal it, and system logs show the original hardware ID USB\VID_04F2 and PID_B766 (Chicony / HP Wide Vision HD Camera) is no longer being detected on the AMD USB 3.10 eXtensible Host Controller bus. I have already performed a full 20-second hard power-drain/EC reset, scanned for hardware changes on the USB root hub and host controller, reset BIOS settings to defaults (F9 to load defaults, then F10 to save and exit), checked HP Hardware Diagnostics UEFI (F2), ran SFC and DISM repair scans, and checked Windows optional driver updates, but the camera hardware still does not re-enumerate. Could an HP technician or community member confirm if there is a known Embedded Controller (EC) firmware bug cutting power to the internal camera USB rail on the 15-fb series, a hardware camera toggle, or if this indicates a physical internal webcam ribbon cable failure that needs servicing?
Solved! Go to Solution.
Accepted Solutions
11-14-2026 08:34 AM
Hi @selvendiran063,
Thanks for all the troubleshooting on your Victus 15-fb0xxx. When the camera disappears completely from the USB bus (no VID_04F2/PID_B766 even with hidden devices shown), Windows has nothing left to reinstall: the camera either isn't getting power or its connection isn't being enumerated by the BIOS/USB controller.
Option 1 – Re-enumerate the camera
- Shut down (hold Shift while clicking Shut down to skip Fast Startup), unplug the adapter and hold the power button 30 seconds.
- Enter the BIOS (Esc > F10) and check under Advanced/Built-in Device Options that the camera is enabled, then press F9 (defaults) and F10 (save).
- Install the latest BIOS, AMD chipset and camera driver for the 15-fb0xxx from https://support.hp.com/drivers.
Option 2 – Confirm hardware
- Boot a Linux live USB (or run Esc > F2 > Component Tests if a camera test is listed) and see whether the camera appears.
- If it doesn't appear outside Windows either, the camera module or its cable has failed.
If the camera is missing outside Windows too, check the warranty at https://support.hp.com/check-warranty and contact HP: https://support.hp.com/contact-hp
Let me know how it goes!
I am proudly Mexican, a Computer Systems Engineer and an HP Community volunteer (not an HP employee).
Did this reply help? Click the "Yes" button below to say thanks.
Did it solve your problem? Please click "Accept as Solution" so others with the same issue can find it.
Please keep the conversation in the thread and never post personal data (serial number, email, phone or address).
11-14-2026 08:34 AM
Hi @selvendiran063,
Thanks for all the troubleshooting on your Victus 15-fb0xxx. When the camera disappears completely from the USB bus (no VID_04F2/PID_B766 even with hidden devices shown), Windows has nothing left to reinstall: the camera either isn't getting power or its connection isn't being enumerated by the BIOS/USB controller.
Option 1 – Re-enumerate the camera
- Shut down (hold Shift while clicking Shut down to skip Fast Startup), unplug the adapter and hold the power button 30 seconds.
- Enter the BIOS (Esc > F10) and check under Advanced/Built-in Device Options that the camera is enabled, then press F9 (defaults) and F10 (save).
- Install the latest BIOS, AMD chipset and camera driver for the 15-fb0xxx from https://support.hp.com/drivers.
Option 2 – Confirm hardware
- Boot a Linux live USB (or run Esc > F2 > Component Tests if a camera test is listed) and see whether the camera appears.
- If it doesn't appear outside Windows either, the camera module or its cable has failed.
If the camera is missing outside Windows too, check the warranty at https://support.hp.com/check-warranty and contact HP: https://support.hp.com/contact-hp
Let me know how it goes!
I am proudly Mexican, a Computer Systems Engineer and an HP Community volunteer (not an HP employee).
Did this reply help? Click the "Yes" button below to say thanks.
Did it solve your problem? Please click "Accept as Solution" so others with the same issue can find it.
Please keep the conversation in the thread and never post personal data (serial number, email, phone or address).
11-14-2026 08:56 AM
Thank you for the response. I have followed all the steps in Option 1 and Option 2, but the camera is still completely missing.
I performed a complete shutdown using Shift plus Shut Down to bypass Fast Startup, unplugged the charger, and held the power button down for 30 full seconds. I also entered BIOS, loaded factory defaults with F9, and saved with F10. The system is already running the latest F.26 BIOS and AMD chipset drivers.
When running the HP Hardware Diagnostics UEFI component tests at startup, the camera is not even listed as an available component, which confirms it is not detected outside Windows either.
Before I send the laptop in for hardware service, is there any other possible trick or step left to re-initialize the camera? Could a CMOS battery reset, a BIOS rollback, or an internal cable check be worth trying?