-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Operating Systems and Recovery
- changing boot drive for hp pavilion 690-0013w ssid 8433

Create an account on the HP Community to personalize your profile and ask a question
11-20-2018 08:00 PM
can i use the bios update for 8433 to change boot drive for hp pavilion 690-0013 and update it to ssid 8436
Solved! Go to Solution.
Accepted Solutions
12-03-2018 03:45 PM
My question wasnt about wifi the hp 690 0013w has two different bios updates look for yourself. I was asking if they both work for the system I have. My system has the first on (bios update) installed. But I got my own solution. I created a recovery media on a usb drive and well when it was almost finished installing on the ssd with the hdd unhooked I pulled it out which made it fail. I then hooked the hdd back up booted Windows off the hdd used Marcum reflect and made a copy of the hdd to the ssd and then powered into bios then and ONLY THEN was the option to change boot drive and order there so that issue is solved. I'm now looking to up fan speeds as under load hits well over 90c and the fan barely kicks on. Speedfan hwinfo NOTHING NO SOFTWARE I'VE FOUND works as speedfan can't allow me to select my cup as it doesn't detect it? Has a 4 pin cpu fan and exhaust fan as well....whats the deal? The two four pin power supply connectors to the mb have anything to do with it.?
12-03-2018 03:45 PM
My question wasnt about wifi the hp 690 0013w has two different bios updates look for yourself. I was asking if they both work for the system I have. My system has the first on (bios update) installed. But I got my own solution. I created a recovery media on a usb drive and well when it was almost finished installing on the ssd with the hdd unhooked I pulled it out which made it fail. I then hooked the hdd back up booted Windows off the hdd used Marcum reflect and made a copy of the hdd to the ssd and then powered into bios then and ONLY THEN was the option to change boot drive and order there so that issue is solved. I'm now looking to up fan speeds as under load hits well over 90c and the fan barely kicks on. Speedfan hwinfo NOTHING NO SOFTWARE I'VE FOUND works as speedfan can't allow me to select my cup as it doesn't detect it? Has a 4 pin cpu fan and exhaust fan as well....whats the deal? The two four pin power supply connectors to the mb have anything to do with it.?