computer not start easily and takes 30 minutes to start after pressing power on button several times

[P1603]

whenever i start my lapop it takes lot of time in starting the window. I only heard the fan noise for 5 to 6 seconds and than it stops . This is the problem i am facing from 2 months 

[Hawks_Eye]

Hi @P1603 

Welcome to the HP Support Community! 

Thanks for posting your query! We're here to help you get back up and running.

The issue you're describing seems to point to a hardware or system problem that's delaying the boot process. Here's a detailed troubleshooting guide to help resolve this:

1. Check Power and Hardware

• Inspect the Power Source:
  • Ensure your laptop charger is functioning properly. Try using a different charger if possible to rule out power delivery issues.
• Remove Peripherals:
  • Disconnect all external devices (USB drives, external monitors, etc.) and then power on the laptop. Faulty peripherals can sometimes interfere with startup.

2. Perform a Hard Reset

• Turn off the laptop and disconnect it from the power adapter.
• If your laptop has a removable battery, take it out. Hold the Power Button for 30 seconds to drain any residual power.
• Reconnect the battery (if applicable) and power on the laptop.

3. RAM and Storage Health

• Reseat or Test the RAM:
  • If you're comfortable opening your laptop, check the RAM modules. Remove them and reinsert them securely to ensure proper connection.
  • If you suspect a failing RAM module, test with one stick at a time.
• Test the Storage Drive:
  • A failing HDD or SSD can cause slow startup. Use diagnostic tools like chkdsk or third-party software such as CrystalDiskInfo to check for errors.

4. Safe Mode Boot

• Boot into Safe Mode:
  • Restart the laptop and press F8, Esc, or Shift + F8 repeatedly during startup (depending on your system).
  • If it boots faster in Safe Mode, there may be a software or driver conflict causing delays.

5. Update or Reinstall Drivers

• Check Drivers:
  • Open Device Manager and look for any yellow warning symbols indicating driver issues.
  • Update your critical drivers (chipset, graphics, etc.) from your laptop manufacturer’s website.
• Windows Update:
  • Ensure your system is up to date by visiting Settings > Update & Security > Windows Update.

6. Disable Startup Programs

• Reduce the number of programs loading at startup:
  • Press Ctrl + Shift + Esc to open Task Manager.
  • Navigate to the Startup tab and disable unnecessary programs.

7. Reset BIOS Settings

• Access the BIOS/UEFI during startup (press F2, Esc, or Delete, depending on your laptop model).
• Restore the BIOS to default settings and save changes.

8. Test for Overheating

• Clean the vents and fans using compressed air to prevent overheating, which might halt the startup process.
• Consider applying fresh thermal paste to the CPU if it's been a while since maintenance.

9. Check for System Corruption

• Open Command Prompt (Admin) and type:
  • sfc /scannow - This scans and repairs corrupted system files.
  • chkdsk /f - This checks and fixes disk errors.

10. Reinstall Windows

• If all else fails, backup your important files and perform a clean installation of Windows 10 or Windows 11. This can eliminate any persistent software conflicts or OS corruption.

If this solution hits the spot, please come back and click "Accepted Solution" to help others find the answer. And if you'd like to say thanks, select "Yes" on the bottom left of the public post, as that would make our day! 

Take care, and have an amazing day!

Regards, 

Hawks_Eye

[Hawks_Eye]

Hi @P1603 

Please try the above steps at your leisure and keep us posted if you need further assistance.

If this solution hits the spot, please come back and click "Accepted Solution" to help others find the answer. And if you'd like to say thanks, select "Yes" on the bottom left of the public post, as that would make our day! 

Take care, and have an amazing day!

Regards, 

Hawks_Eye