getting an error on startup after total shutdown that the fan is not working properly

[bluebug]

Upon startup after being shut down all night, i get error message about fan not working properly.  During the day the laptop does not shut down and i do monitor the heat from it with speed fan. 

[Echo_Lake]

@bluebug

Thank you for posting on HP Support Community.

Don't worry as I'll be glad to help, I have a few troubleshooting steps we could try to fix the issue:  

To fix this error, use the following steps:

1. Press Enter to clear the message and allow the system to boot to the Windows Desktop.

2. Shut down the computer, and then inspect and clean the exterior vents to remove dust buildup by blowing air through the vent openings. Dust can accumulate inside the vent openings and around internal cooling components, preventing the removal of heat.

   For more information on reducing heat inside your computer, see Reducing Heat Inside the PC.

3. After you remove the dust, turn on the computer. If the error message persists, continue with these steps.

4. Perform a hard reset. Performing a hard reset can reset recorded thermal values in memory and enable you to use the computer again, even if only for a short time to access and save any important files before service.

   For more information on performing a hard reset, see Use Hard Reset to Resolve Hardware and Software Issues.

5. In some cases, updating the BIOS might help prevent this error from occurring.

   For more information on how to update the BIOS, see Updating the BIOS.

Hope this helps! Keep me posted for further assistance.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.